[dts] [PATCH V1 4/5] test_plans: add supplementary runtime vf queue number test plan
Lijuan Tu
lijuan.tu at intel.com
Tue Jan 29 18:06:11 CET 2019
In order to simplify script, seperate the test case of maxinum vf queue
number to this test plan.
Signed-off-by: Lijuan Tu <lijuan.tu at intel.com>
---
.../runtime_vf_queue_number_maxinum_test_plan.rst | 134 +++++++++++++++++++++
1 file changed, 134 insertions(+)
create mode 100644 test_plans/runtime_vf_queue_number_maxinum_test_plan.rst
diff --git a/test_plans/runtime_vf_queue_number_maxinum_test_plan.rst b/test_plans/runtime_vf_queue_number_maxinum_test_plan.rst
new file mode 100644
index 0000000..bbf8760
--- /dev/null
+++ b/test_plans/runtime_vf_queue_number_maxinum_test_plan.rst
@@ -0,0 +1,134 @@
+.. Copyright (c) <2019>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+==========================================
+VF Request Maximum Queue Number At Runtime
+==========================================
+
+This test plan is an additional tests for VF Request Queue Number At Runtime.
+In order to make testing excution efficiency, we put the test case of
+maximum queue number in this plan, because of different test scenarios.
+
+Feature Description
+===================
+
+see runtime_vf_queue_number_test_plan.rst
+
+Prerequisites
+=============
+
+1. Hardware:
+
+- Fortville(X710/XXV710/XL710)
+
+2. Software:
+
+- dpdk: http://dpdk.org/git/dpdk (version: 19.02+)
+- scapy: http://www.secdev.org/projects/scapy/
+
+3. Scenario:
+ DPDK PF + DPDK VF
+
+Test case 1: set VF max queue number with max VFs on one PF port
+================================================================
+
+1. Set up max VFs from one PF with DPDK driver
+ Create 32 vfs on four ports fortville NIC::
+
+ echo 32 > /sys/bus/pci/devices/0000\:05\:00.0/max_vfs
+
+ Create 64 vfs on two ports fortville NIC::
+
+ echo 64 > /sys/bus/pci/devices/0000\:05\:00.0/max_vfs
+
+ Bind the two of the VFs to DPDK driver::
+
+ ./usertools/dpdk-devbind.py -b vfio-pci 05:02.0 05:05.7
+
+2. Set VF max queue number to 16::
+
+ ./testpmd -c f -n 4 -w 05:00.0,queue-num-per-vf=16 \
+ --file-prefix=test1 --socket-mem 1024,1024 -- -i
+
+ PF port failed to started with "i40e_pf_parameter_init():
+ Failed to allocate 577 queues, which exceeds the hardware maximum 384"
+ If create 64 vfs, the maximum is 768.
+
+3. Set VF max queue number to 8::
+
+ ./testpmd -c f -n 4 -w 05:00.0,queue-num-per-vf=8 \
+ --file-prefix=test1 --socket-mem 1024,1024 -- -i
+
+4. Start the two VFs testpmd with "--rxq=8 --txq=8" and "--rxq=6 --txq=6"::
+
+ ./testpmd -c 0xf0 -n 4 -w 05:02.0 --file-prefix=test2 \
+ --socket-mem 1024,1024 -- -i --rxq=8 --txq=8
+
+ ./testpmd -c 0xf00 -n 4 -w 05:05.7 --file-prefix=test3 \
+ --socket-mem 1024,1024 -- -i --rxq=6 --txq=6
+
+ Check the Max possible RX queues and TX queues of the two VFs are both 8::
+
+ testpmd> show port info all
+ Max possible RX queues: 8
+ Max possible TX queues: 8
+
+ Start forwarding, you can see the actual queue number
+ VF0::
+
+ testpmd> start
+ RX queues=8 - RX desc=128 - RX free threshold=32
+ TX queues=8 - TX desc=512 - TX free threshold=32
+
+ VF1::
+
+ testpmd> start
+ RX queues=6 - RX desc=128 - RX free threshold=32
+ TX queues=6 - TX desc=512 - TX free threshold=32
+
+ Modify the queue number of VF1::
+
+ testpmd> stop
+ testpmd> port stop all
+ testpmd> port config all rxq 8
+ testpmd> port config all txq 7
+ testpmd> port start all
+
+ Start forwarding, you can see the VF1 actual queue number is 8 and 7::
+
+ testpmd> start
+ RX queues=8 - RX desc=128 - RX free threshold=32
+ TX queues=7 - TX desc=512 - TX free threshold=32
+
+5. Send 256 packets to VF0 and VF1, make sure packets can be distributed
+ to all the queues.
+
--
1.8.3.1
More information about the dts
mailing list