[dts] [PATCH V1]test_plan/vm2vm_virtio_net_perf: fix typo

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of yufengmx
> Sent: Tuesday, July 2, 2019 4:21 PM
> To: dts at dpdk.org
> Cc: Mo, YufengX <yufengx.mo at intel.com>
> Subject: [dts] [PATCH V1]test_plan/vm2vm_virtio_net_perf: fix typo
> 
> 
> fix typo issue.
> 
> Signed-off-by: yufengmx <yufengx.mo at intel.com>
> ---
>  test_plans/vm2vm_virtio_net_perf_test_plan.rst | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
> b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
> index 77930dc..96f0cc4 100644
> --- a/test_plans/vm2vm_virtio_net_perf_test_plan.rst
> +++ b/test_plans/vm2vm_virtio_net_perf_test_plan.rst
> @@ -8,7 +8,7 @@
>     - Redistributions of source code must retain the above copyright
>       notice, this list of conditions and the following disclaimer.
> 
> -   - Redistributions in binary forim must reproduce the above copyright
> +   - Redistributions in binary form must reproduce the above copyright
>       notice, this list of conditions and the following disclaimer in
>       the documentation and/or other materials provided with the
>       distribution.
> @@ -74,12 +74,12 @@ Test Case 1: VM2VM vhost-user/virtio-net test with
> tcp traffic
>       -device virtio-net-
> pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=off,csum=on,guest_csu
> m=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
>       -vnc :11 -daemonize
> 
> -3. On VM1, set virtio device IP and run arp protocal::
> +3. On VM1, set virtio device IP and run arp protocol::
> 
>      ifconfig ens3 1.1.1.2
>      arp -s 1.1.1.8 52:54:00:00:00:02
> 
> -4. On VM2, set virtio device IP and run arp protocal::
> +4. On VM2, set virtio device IP and run arp protocol::
> 
>      ifconfig ens3 1.1.1.8
>      arp -s 1.1.1.2 52:54:00:00:00:01
> @@ -124,12 +124,12 @@ Test Case 2: VM2VM vhost-user/virtio-net zero-
> copy test with tcp traffic
>       -device virtio-net-
> pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=off,csum=on,guest_csu
> m=on,host_tso4=on,guest_tso4=on,guest_ecn=on \
>       -vnc :11 -daemonize
> 
> -3. On VM1, set virtio device IP and run arp protocal::
> +3. On VM1, set virtio device IP and run arp protocol::
> 
>      ifconfig ens3 1.1.1.2
>      arp -s 1.1.1.8 52:54:00:00:00:02
> 
> -4. On VM2, set virtio device IP and run arp protocal::
> +4. On VM2, set virtio device IP and run arp protocol::
> 
>      ifconfig ens3 1.1.1.8
>      arp -s 1.1.1.2 52:54:00:00:00:01
> @@ -171,12 +171,12 @@ Test Case 3: VM2VM vhost-user/virtio-net test with
> udp traffic
>       -chardev socket,id=char1,path=./vhost-net1 -netdev type=vhost-
> user,id=mynet2,chardev=char1,vhostforce \
>       -device virtio-net-
> pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=off,csum=on,guest_csu
> m=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=o
> n -vnc :11 -daemonize
> 
> -3. On VM1, set virtio device IP and run arp protocal::
> +3. On VM1, set virtio device IP and run arp protocol::
> 
>      ifconfig ens3 1.1.1.2
>      arp -s 1.1.1.8 52:54:00:00:00:02
> 
> -4. On VM2, set virtio device IP and run arp protocal::
> +4. On VM2, set virtio device IP and run arp protocol::
> 
>      ifconfig ens3 1.1.1.8
>      arp -s 1.1.1.2 52:54:00:00:00:01
> @@ -261,12 +261,12 @@ Test Case 5: VM2VM vhost-user/virtio-net test with
> large packet payload valid ch
>       -device virtio-net-
> pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on  \
>       -vnc :11 -daemonize
> 
> -3. On VM1, set virtio device IP and run arp protocal::
> +3. On VM1, set virtio device IP and run arp protocol::
> 
>      ifconfig ens3 1.1.1.2
>      arp -s 1.1.1.8 52:54:00:00:00:02
> 
> -4. On VM2, set virtio device IP and run arp protocal::
> +4. On VM2, set virtio device IP and run arp protocol::
> 
>      ifconfig ens3 1.1.1.8
>      arp -s 1.1.1.2 52:54:00:00:00:01
> --
> 1.9.3