[dts] [PATCH v1] test_plans: update test plan for loopback multi-paths port restart
Yinan
yinan.wang at intel.com
Sun Jul 7 21:23:54 CEST 2019
From: Wang Yinan <yinan.wang at intel.com>
Signed-off-by: Wang Yinan <yinan.wang at intel.com>
---
...ack_multi_paths_port_restart_test_plan.rst | 86 ++++++-------------
1 file changed, 24 insertions(+), 62 deletions(-)
diff --git a/test_plans/loopback_multi_paths_port_restart_test_plan.rst b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
index 0b9b87a..76aba32 100644
--- a/test_plans/loopback_multi_paths_port_restart_test_plan.rst
+++ b/test_plans/loopback_multi_paths_port_restart_test_plan.rst
@@ -8,7 +8,7 @@
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- - Redistributions in binary form must reproduce the above copyright
+ - Redistributions in binary forim must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
@@ -34,13 +34,8 @@
vhost/virtio loopback with multi-paths and port restart test plan
=================================================================
-Description
-===========
-
-Benchmark vhost/virtio-user loopback test with 8 rx/tx paths.
-Includes mergeable, normal, vector_rx, inorder mergeable,
-inorder no-mergeable, virtio 1.1 mergeable, virtio 1.1 inorder, virtio 1.1 normal path.
-Also cover port restart test with each path.
+Benchmark vhost/virtio-user loopback test with 7 rx/tx paths, includes virtio 1.0 mergeable, normal, vector_rx, inorder mergeable,
+inorder no-mergeable path and virtio 1.1 mergeable, normal path. Also test port restart and only send one packet each time using testpmd.
Test Case 1: loopback test with virtio 1.1 mergeable path
=========================================================
@@ -79,7 +74,8 @@ Test Case 1: loopback test with virtio 1.1 mergeable path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
Test Case 2: loopback test with virtio 1.1 normal path
@@ -119,50 +115,11 @@ Test Case 2: loopback test with virtio 1.1 normal path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
- testpmd>show port stats all
-
-Test Case 3: loopback test with virtio 1.1 inorder path
-=======================================================
-
-1. Launch vhost by below command::
-
- rm -rf vhost-net*
- ./testpmd -n 4 -l 2-4 --socket-mem 1024,1024 --legacy-mem --no-pci \
- --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net,queues=1,client=0' -- -i --nb-cores=1 --txd=1024 --rxd=1024
- testpmd>set fwd mac
-
-2. Launch virtio-user by below command::
-
- ./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
- --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,packed_vq=1,in_order=1,mrg_rxbuf=0 \
- -- -i --tx-offloads=0x0 --enable-hw-vlan-strip --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
- >set fwd mac
- >start
-
-3. Send packets with vhost-testpmd, [frame_size] is the parameter changs in [64, 128, 256, 512, 1024, 1518]::
-
- testpmd>set txpkts [frame_size]
- testpmd>start tx_first 32
-
-4. Get throughput 10 times and calculate the average throughput::
-
- testpmd>show port stats all
-
-5. Stop port at vhost side and re-calculate the average throughput, verify the throughput is zero after port stop::
-
- testpmd>stop
- testpmd>port stop 0
- testpmd>show port stats all
-
-6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
-
- testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
-Test Case 4: loopback test with inorder mergeable path
+Test Case 3: loopback test with inorder mergeable path
======================================================
1. Launch vhost by below command::
@@ -199,10 +156,11 @@ Test Case 4: loopback test with inorder mergeable path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
-Test Case 5: loopback test with inorder no-mergeable path
+Test Case 4: loopback test with inorder no-mergeable path
=========================================================
1. Launch vhost by below command::
@@ -239,10 +197,11 @@ Test Case 5: loopback test with inorder no-mergeable path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
-Test Case 6: loopback test with mergeable path
+Test Case 5: loopback test with mergeable path
==============================================
1. Launch vhost by below command::
@@ -279,10 +238,11 @@ Test Case 6: loopback test with mergeable path
testpmd>stop
testpmd>port stop 0
testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
-Test Case 7: loopback test with normal path
+Test Case 6: loopback test with normal path
===========================================
1. Launch vhost by below command::
@@ -319,10 +279,11 @@ Test Case 7: loopback test with normal path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
+ testpmd>set burst 1
+ testpmd>start tx_first 1
testpmd>show port stats all
-Test Case 8: loopback test with vector_rx path
+Test Case 7: loopback test with vector_rx path
==============================================
1. Launch vhost by below command::
@@ -337,7 +298,7 @@ Test Case 8: loopback test with vector_rx path
./testpmd -n 4 -l 5-6 --socket-mem 1024,1024 \
--legacy-mem --no-pci --file-prefix=virtio \
--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,in_order=0,mrg_rxbuf=0 \
- -- -i --tx-offloads=0x0 --rss-ip --nb-cores=1 --txd=1024 --rxd=1024
+ -- -i --nb-cores=1 --txd=1024 --rxd=1024
>set fwd mac
>start
@@ -359,5 +320,6 @@ Test Case 8: loopback test with vector_rx path
6. Restart port at vhost side and re-calculate the average throughput, verify the throughput is not zero after port restart::
testpmd>port start 0
- testpmd>start tx_first 32
- testpmd>show port stats all
+ testpmd>set burst 1
+ testpmd>start tx_first 1
+ testpmd>show port stats all
\ No newline at end of file
--
2.17.1
More information about the dts
mailing list