[dts] [PATCH v2] Adding Eventdev feature performance Testplan
Tu, Lijuan
lijuan.tu at intel.com
Wed Jun 12 04:59:33 CEST 2019
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of thaq at marvell.com
> Sent: Monday, June 10, 2019 4:58 PM
> To: dts at dpdk.org
> Cc: fmasood at marvell.com; avijay at marvell.com; jerinj at marvell.com;
> Thanseerulhaq <thaq at marvell.com>
> Subject: [dts] [PATCH v2] Adding Eventdev feature performance Testplan
>
> From: Thanseerulhaq <thaq at marvell.com>
>
> test_plans/eventdev_perf_test_plan.rst: Adding testcase for 1/2/4 NIC ports
> for eventdev features atomic, parallel, order stages.
> Signed-off-by: Thanseerulhaq <thaq at marvell.com>
> ---
> test_plans/eventdev_perf_test_plan.rst | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/test_plans/eventdev_perf_test_plan.rst
> b/test_plans/eventdev_perf_test_plan.rst
> index ed1312a..cfe19ef 100644
> --- a/test_plans/eventdev_perf_test_plan.rst
> +++ b/test_plans/eventdev_perf_test_plan.rst
> @@ -30,11 +30,11 @@ echo 24 > /proc/sys/vm/nr_hugepages
>
> Configure limits of Eventdev devices
> ====================================
> -Set all eventdev devices sso and ssow limits to zero. Then set eventdev
> device under tests sso and ssow limits to non-zero values as per
> cores/queues requriments ::
> +Set all eventdev devices sso and ssow limits to zero. Then set eventdev
> device under tests sso and ssow limits to non-zero values as per
> cores/queues requriments ::
> echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
> echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/ssow
>
> -Example ::
> +Example ::
> echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/tim
> echo 1 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/npa
> echo 16 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
> @@ -58,7 +58,7 @@ Description: Execute performance test with Atomic_atq
> type of stage in multi-flo
> -w --pci-whitelist : Add a PCI device in white list.
> Only use the specified PCI devices. The argument format
> is <[domain:]bus:devid.func>. This option can be present
> - several times (once per device).
> + several times (once per device).
> --prod_type_ethdev : use ethernet device as producer.
> --nb_pkts : number of packets to produce, 0 implies no limit
> --test : name of the test application to run
> @@ -100,7 +100,7 @@ Description: Execute performance test with
> Atomic_queue type of stage in multi-f 1. Run the sample with below
> command::
>
> # ./build/dpdk-test-eventdev -l 22-23 -w eventdev_device_bus_id -w
> device_bus_id -- --prod_type_ethdev --nb_pkts=0 --verbose 2 --
> test=pipeline_queue --stlist=A --wlcores=23
> -
> +
> 2. Use Ixia to send huge number of packets(with same 5-tuple and different
> 5-tuple)
>
> 3. Observe the speed of packets received(Rx-rate) on Ixia.
> @@ -172,7 +172,7 @@ Description: Execute performance test with
> Atomic_queue type of stage in multi-f 1. Run the sample with below
> command::
>
> # ./build/dpdk-test-eventdev -l 22-23 -w eventdev_device_bus_id -w
> device0_bus_id -w device1_bus_id -- --prod_type_ethdev --nb_pkts=0 --
> verbose 2 --test=pipeline_queue --stlist=A --wlcores=23
> -
> +
> 2. Use Ixia to send huge number of packets(with same 5-tuple and different
> 5-tuple)
>
> 3. Observe the speed of packets received(Rx-rate) on Ixia.
> @@ -245,7 +245,7 @@ Description: Execute performance test with
> Atomic_queue type of stage in multi-f 1. Run the sample with below
> command::
>
> # ./build/dpdk-test-eventdev -l 22-23 -w eventdev_device_bus_id -w
> device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -- --
> prod_type_ethdev --nb_pkts=0 --verbose 2 --test=pipeline_queue --stlist=A --
> wlcores=23
> -
> +
> 2. Use Ixia to send huge number of packets(with same 5-tuple and different
> 5-tuple)
>
> 3. Observe the speed of packets received(Rx-rate) on Ixia.
> --
> 1.8.3.1
More information about the dts
mailing list