[dts] [PATCH v2] Adding Eventdev_pipeline feature performance Testplan

[Tu, Lijuan]

Hi thaq,
I think you should submit the whole test plan, because there is no test_plans/eventdev_pipeline_test_plan.rst in current DTS.
thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of thaq at marvell.com
> Sent: Monday, June 10, 2019 5:01 PM
> To: dts at dpdk.org
> Cc: fmasood at marvell.com; avijay at marvell.com; jerinj at marvell.com;
> Thanseerulhaq <thaq at marvell.com>
> Subject: [dts] [PATCH v2] Adding Eventdev_pipeline feature performance
> Testplan
> 
> From: Thanseerulhaq <thaq at marvell.com>
> 
> Adding testcase for 1/2/4 NIC ports for eventdev features atomic, parallel,
> order stages.
> 
> Signed-off-by: Thanseerulhaq <thaq at marvell.com>
> ---
>  test_plans/eventdev_pipeline_perf_test_plan.rst | 58 ++++++++++++-----------
> --
>  1 file changed, 29 insertions(+), 29 deletions(-)
> 
> diff --git a/test_plans/eventdev_pipeline_perf_test_plan.rst
> b/test_plans/eventdev_pipeline_perf_test_plan.rst
> index f2b2a7e..619f9a3 100644
> --- a/test_plans/eventdev_pipeline_perf_test_plan.rst
> +++ b/test_plans/eventdev_pipeline_perf_test_plan.rst
> @@ -30,11 +30,11 @@ echo 24 > /proc/sys/vm/nr_hugepages
> 
>  Configure limits of Eventdev devices
>  ====================================
> -Set all eventdev devices sso and ssow limits to zero. Then set eventdev
> device under tests sso and ssow limits to non-zero values as per
> cores/queues requriments ::
> +Set all eventdev devices sso and ssow limits to zero. Then set eventdev
> device under tests sso and ssow limits to non-zero values as per
> cores/queues requriments ::
>     echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
>     echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/ssow
> 
> -Example ::
> +Example ::
>     echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/tim
>     echo 1 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/npa
>     echo 16 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
> @@ -56,8 +56,8 @@ Description: Execute performance test with Atomic_atq
> type of stage in multi-flo
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
>                                 is <[domain:]bus:devid.func>. This option can be present
> -                               several times (once per device).
> -        EAL Commands
> +                               several times (once per device).
> +        EAL Commands
>          -w, --worker-mask=core mask : Run worker on CPUs in core mask
>          -n, --packets=N             : Send N packets (default ~32M), 0 implies no
> limit
>          -D, --dump                   Print detailed statistics before exit
> @@ -74,13 +74,13 @@ Description: Execute performance test with
> Parallel_atq type of stage in multi-f
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device_bus_id -- -w 0xc00000 -n=0 -p --dump
> 
> -    Parameters:
> +    Parameters:
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
>                                 is <[domain:]bus:devid.func>. This option can be present
> -                               several times (once per device).
> -        EAL Commands
> +                               several times (once per device).
> +        EAL Commands
>          -w, --worker-mask=core mask : Run worker on CPUs in core mask
>          -n, --packets=N             : Send N packets (default ~32M), 0 implies no
> limit
>          -p, --parallel              : Use parallel scheduling
> @@ -97,14 +97,14 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl  1. Run the sample with below
> command::
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device_bus_id -- -w 0xc00000 -n=0 -o --dump
> -
> -    Parameters:
> +
> +    Parameters:
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
>                                 is <[domain:]bus:devid.func>. This option can be present
> -                               several times (once per device).
> -        EAL Commands
> +                               several times (once per device).
> +        EAL Commands
>          -w, --worker-mask=core mask : Run worker on CPUs in core mask
>          -n, --packets=N             : Send N packets (default ~32M), 0 implies no
> limit
>          -o, --ordered                Use ordered scheduling
> @@ -127,8 +127,8 @@ Description: Execute performance test with
> Atomic_atq type of stage in multi-flo
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
>                                 is <[domain:]bus:devid.func>. This option can be present
> -                               several times (once per device).
> -        EAL Commands
> +                               several times (once per device).
> +        EAL Commands
>          -w, --worker-mask=core mask : Run worker on CPUs in core mask
>          -n, --packets=N             : Send N packets (default ~32M), 0 implies no
> limit
>          -D, --dump                   Print detailed statistics before exit
> @@ -145,13 +145,13 @@ Description: Execute performance test with
> Parallel_atq type of stage in multi-f
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -p --dump
> 
> -    Parameters:
> +    Parameters:
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
>                                 is <[domain:]bus:devid.func>. This option can be present
> -                               several times (once per device).
> -        EAL Commands
> +                               several times (once per device).
> +        EAL Commands
>          -w, --worker-mask=core mask : Run worker on CPUs in core mask
>          -n, --packets=N             : Send N packets (default ~32M), 0 implies no
> limit
>          -p, --parallel              : Use parallel scheduling
> @@ -168,14 +168,14 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl  1. Run the sample with below
> command::
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -o --dump
> -
> -    Parameters:
> +
> +    Parameters:
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
>                                 is <[domain:]bus:devid.func>. This option can be present
> -                               several times (once per device).
> -        EAL Commands
> +                               several times (once per device).
> +        EAL Commands
>          -w, --worker-mask=core mask : Run worker on CPUs in core mask
>          -n, --packets=N             : Send N packets (default ~32M), 0 implies no
> limit
>          -o, --ordered                Use ordered scheduling
> @@ -198,8 +198,8 @@ Description: Execute performance test with
> Atomic_atq type of stage in multi-flo
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
>                                 is <[domain:]bus:devid.func>. This option can be present
> -                               several times (once per device).
> -        EAL Commands
> +                               several times (once per device).
> +        EAL Commands
>          -w, --worker-mask=core mask : Run worker on CPUs in core mask
>          -n, --packets=N             : Send N packets (default ~32M), 0 implies no
> limit
>          -D, --dump                   Print detailed statistics before exit
> @@ -216,13 +216,13 @@ Description: Execute performance test with
> Parallel_atq type of stage in multi-f
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -
> - -w 0xc00000 -n=0 -p --dump
> 
> -    Parameters:
> +    Parameters:
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
>                                 is <[domain:]bus:devid.func>. This option can be present
> -                               several times (once per device).
> -        EAL Commands
> +                               several times (once per device).
> +        EAL Commands
>          -w, --worker-mask=core mask : Run worker on CPUs in core mask
>          -n, --packets=N             : Send N packets (default ~32M), 0 implies no
> limit
>          -p, --parallel              : Use parallel scheduling
> @@ -239,14 +239,14 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl  1. Run the sample with below
> command::
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -
> - -w 0xc00000 -n=0 -o --dump
> -
> -    Parameters:
> +
> +    Parameters:
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
>                                 is <[domain:]bus:devid.func>. This option can be present
> -                               several times (once per device).
> -        EAL Commands
> +                               several times (once per device).
> +        EAL Commands
>          -w, --worker-mask=core mask : Run worker on CPUs in core mask
>          -n, --packets=N             : Send N packets (default ~32M), 0 implies no
> limit
>          -o, --ordered                Use ordered scheduling
> --
> 1.8.3.1