[dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build warnings

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Wenjie Li
> Sent: Wednesday, June 12, 2019 5:00 PM
> To: dts at dpdk.org
> Cc: Li, WenjieX A <wenjiex.a.li at intel.com>
> Subject: [dts] [PATCH V1 1/2] test_plans/eventdev_pipeline_perf: fix build
> warnings
> 
> fix some build warnings.
> 
> Signed-off-by: Wenjie Li <wenjiex.a.li at intel.com>
> ---
>  .../eventdev_pipeline_perf_test_plan.rst      | 31 +++++++++++++------
>  1 file changed, 21 insertions(+), 10 deletions(-)
> 
> diff --git a/test_plans/eventdev_pipeline_perf_test_plan.rst
> b/test_plans/eventdev_pipeline_perf_test_plan.rst
> index 619f9a3..0cd9110 100644
> --- a/test_plans/eventdev_pipeline_perf_test_plan.rst
> +++ b/test_plans/eventdev_pipeline_perf_test_plan.rst
> @@ -31,10 +31,12 @@ echo 24 > /proc/sys/vm/nr_hugepages  Configure
> limits of Eventdev devices  ====================================
>  Set all eventdev devices sso and ssow limits to zero. Then set eventdev
> device under tests sso and ssow limits to non-zero values as per
> cores/queues requriments ::
> +
>     echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
>     echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/ssow
> 
>  Example ::
> +
>     echo 0 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/tim
>     echo 1 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/npa
>     echo 16 > /sys/bus/pci/devices/eventdev_device_bus_id/limits/sso
> @@ -51,7 +53,8 @@ Description: Execute performance test with Atomic_atq
> type of stage in multi-flo
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device_bus_id -- -w 0xc00000 -n=0 --dump
> 
> -    Parameters:
> +    Parameters::
> +
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
> @@ -74,7 +77,8 @@ Description: Execute performance test with Parallel_atq
> type of stage in multi-f
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device_bus_id -- -w 0xc00000 -n=0 -p --dump
> 
> -    Parameters:
> +    Parameters::
> +
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
> @@ -98,7 +102,8 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device_bus_id -- -w 0xc00000 -n=0 -o --dump
> 
> -    Parameters:
> +    Parameters::
> +
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
> @@ -122,7 +127,8 @@ Description: Execute performance test with
> Atomic_atq type of stage in multi-flo
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 --dump
> 
> -    Parameters:
> +    Parameters::
> +
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
> @@ -145,7 +151,8 @@ Description: Execute performance test with
> Parallel_atq type of stage in multi-f
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -p --dump
> 
> -    Parameters:
> +    Parameters::
> +
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
> @@ -169,7 +176,8 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -- -w 0xc00000 -n=0 -o --dump
> 
> -    Parameters:
> +    Parameters::
> +
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
> @@ -193,7 +201,8 @@ Description: Execute performance test with
> Atomic_atq type of stage in multi-flo
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -
> - -w 0xc00000 -n=0 --dump
> 
> -    Parameters:
> +    Parameters::
> +
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
> @@ -216,7 +225,8 @@ Description: Execute performance test with
> Parallel_atq type of stage in multi-f
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -
> - -w 0xc00000 -n=0 -p --dump
> 
> -    Parameters:
> +    Parameters::
> +
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
> @@ -240,7 +250,8 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl
> 
>     # ./build/dpdk-eventdev_pipeline -c 0xe00000 -w eventdev_device_bus_id
> -w device0_bus_id -w device1_bus_id -w device2_bus_id -w device3_bus_id -
> - -w 0xc00000 -n=0 -o --dump
> 
> -    Parameters:
> +    Parameters::
> +
>          -c, COREMASK         : Hexadecimal bitmask of cores to run on
>          -w, --pci-whitelist  : Add a PCI device in white list.
>                                 Only use the specified PCI devices. The argument format
> @@ -254,4 +265,4 @@ Description: Execute performance test with
> Ordered_atq type of stage in multi-fl
> 
>  2. Use Ixia to send huge number of packets(with same 5-tuple and different
> 5-tuple)
> 
> -3. Observe the speed of packets received(Rx-rate) on Ixia.
> +3. Observe the speed of packets received(Rx-rate) on Ixia.
> \ No newline at end of file
> --
> 2.17.2