[dts] [PATCH V1] Add testsuite of loopback multi path port restart
Wang, Yinan
yinan.wang at intel.com
Wed Mar 13 03:52:06 CET 2019
> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of lihong
> Sent: 2019年3月12日 6:14
> To: dts at dpdk.org
> Cc: Ma, LihongX <lihongx.ma at intel.com>
> Subject: [dts] [PATCH V1] Add testsuite of loopback multi path port restart
>
> Signed-off-by: lihong <lihongx.ma at intel.com>
> ---
> .../TestSuite_loopback_multi_paths_port_restart.py | 305
> +++++++++++++++++++++
> 1 file changed, 305 insertions(+)
> create mode 100644 tests/TestSuite_loopback_multi_paths_port_restart.py
>
> diff --git a/tests/TestSuite_loopback_multi_paths_port_restart.py
> b/tests/TestSuite_loopback_multi_paths_port_restart.py
> new file mode 100644
> index 0000000..92995fb
> --- /dev/null
> +++ b/tests/TestSuite_loopback_multi_paths_port_restart.py
> @@ -0,0 +1,305 @@
> +#
> +# BSD LICENSE
> +#
> +# Copyright(c) 2010-2019 Intel Corporation. All rights reserved.
> +# All rights reserved.
> +#
> +# Redistribution and use in source and binary forms, with or without #
> +modification, are permitted provided that the following conditions #
> +are met:
> +#
> +# * Redistributions of source code must retain the above copyright
> +# notice, this list of conditions and the following disclaimer.
> +# * Redistributions in binary form must reproduce the above copyright
> +# notice, this list of conditions and the following disclaimer in
> +# the documentation and/or other materials provided with the
> +# distribution.
> +# * Neither the name of Intel Corporation nor the names of its
> +# contributors may be used to endorse or promote products derived
> +# from this software without specific prior written permission.
> +#
> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS #
> +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
> +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
> FOR #
> +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT #
> +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL, #
> +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> #
> +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
> USE, #
> +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
> ON ANY #
> +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
> +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
> USE #
> +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> +
> +
> +"""
> +DPDK Test suite.
> +Benchmark Vhost loopback for 7 RX/TX PATHs.
> +Includes Mergeable, Normal, Vector_RX,Inorder_mergeable,
> +Inorder_no_mergeable, VIRTIO1.1_mergeable, VIRTIO1.1_normal Path.
> +"""
> +import utils
> +import time
> +import re
> +from test_case import TestCase
> +
> +
> +class TestLoopbackPortRestart(TestCase):
> +
> + def set_up_all(self):
> + """
> + Run at the start of each test suite.
> + """
> + self.frame_sizes = [64, 128, 256, 512, 1024, 1518]
> + self.core_config = "1S/5C/1T"
> + self.number_of_ports = 1
> + self.dut_ports = self.dut.get_ports()
> + self.ports_socket = self.dut.get_numa_id(self.dut_ports[0])
> + ports = []
> + for port in xrange(self.number_of_ports):
> + ports.append(self.dut_ports[port])
> + self.core_list = self.dut.get_core_list(
> + self.core_config, socket=self.ports_socket)
> + self.core_list_user = self.core_list[0:2]
> + self.core_list_host = self.core_list[2:5]
> + self.port_mask = utils.create_mask(ports)
> + self.core_mask_user = utils.create_mask(self.core_list_user)
> + self.core_mask_host = utils.create_mask(self.core_list_host)
> +
> + def set_up(self):
> + """
> + Run before each test case.
> + """
> + # Clean the execution ENV
> + self.dut.send_expect("rm -rf ./vhost.out", "#")
> + self.dut.send_expect("killall -s INT testpmd", "#")
> + self.dut.send_expect("killall -s INT qemu-system-x86_64", "#")
> + # Prepare the result table
> + self.table_header = ["FrameSize(B)", "Mode", "Throughput(Mpps)",
> "Cycle"]
> + self.result_table_create(self.table_header)
> +
> + self.vhost = self.dut.new_session(suite="vhost")
> + self.virtio_user = self.dut.new_session(suite="virtio-user")
> +
> + def start_vhost_testpmd(self):
> + """
> + start testpmd on vhost
> + """
> + self.dut.send_expect("killall -s INT testpmd", "#")
> + self.dut.send_expect("rm -rf ./vhost-net*", "#")
> + command_client = self.dut.target + "/app/testpmd " + \
> + " -n %d -c %s --socket-mem 1024,1024 " + \
> + " --legacy-mem --no-pci --file-prefix=vhost " + \
> + " --vdev
> 'net_vhost0,iface=vhost-net,queues=1,client=0' " + \
> + " -- -i --nb-cores=1 --txd=1024 --rxd=1024"
> + command_line_client = command_client % (
> + self.dut.get_memory_channels(), self.core_mask_host)
> + self.vhost.send_expect(command_line_client, "testpmd> ", 120)
> + self.vhost.send_expect("set fwd mac", "testpmd> ", 120)
> +
> + def start_virtio_user_testpmd(self, pmd_arg):
> + """
> + start testpmd of vhost user
> + """
> + command_line_user = self.dut.target + "/app/testpmd -n %d -c %s
> --socket-mem 1024,1024 " + \
> + "--legacy-mem --no-pci --file-prefix=virtio "
> + \
> +
> "--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=./vhost-net,%s " + \
> + " -- -i %s --rss-ip --nb-cores=1 --txd=1024
> --rxd=1024"
> + command_line_user = command_line_user %
> (self.dut.get_memory_channels(),
> +
> self.core_mask_user,
> +
> pmd_arg["version"], pmd_arg["path"])
> + self.virtio_user.send_expect(command_line_user, "testpmd> ", 120)
> + self.virtio_user.send_expect("set fwd mac", "testpmd> ", 120)
> + self.virtio_user.send_expect("start", "testpmd> ", 120)
> +
> + def check_port_throughput(self):
> + """
> + check the throughput after port stop
> + """
> + loop = 1
> + while(loop <= 5):
> + out = self.vhost.send_expect("show port stats 0", "testpmd>",
> 60)
> + lines = re.search("Rx-pps:\s*(\d*)", out)
> + result = lines.group(1)
> + if result == "0":
> + break
> + time.sleep(3)
> + loop = loop + 1
> + self.verify(result == "0", "port stop failed, it alse can
> + recevie data after stop.")
> +
It's better to check the link status after port stop
> + def check_port_link_status(self):
> + """
> + check the link status after port restart
> + """
> + loop = 1
> + while(loop <= 5):
> + out = self.vhost.send_expect("show port info all", "testpmd> ",
> 120)
> + port_status = re.findall("Link\s*status:\s*([a-z]*)", out)
> + if("down" not in port_status):
> + break
> + time.sleep(3)
> + loop = loop + 1
> +
It's better to check the throughput after por restart
> + self.verify("down" not in port_status, "port can not up after
> + restart")
> +
> + def port_restart(self):
> + self.vhost.send_expect("stop", "testpmd> ", 120)
> + self.vhost.send_expect("port stop 0", "testpmd> ", 120)
> + self.check_port_throughput()
> + self.vhost.send_expect("clear port stats all", "testpmd> ", 120)
> + self.vhost.send_expect("port start all", "testpmd> ", 120)
> + self.check_port_link_status()
> + self.vhost.send_expect("start tx_first 32", "testpmd> ", 120)
> +
> + def update_table_info(self, case_info, frame_size, Mpps, Cycle):
> + results_row = [frame_size]
> + results_row.append(case_info)
> + results_row.append(Mpps)
> + results_row.append(Cycle)
> + self.result_table_add(results_row)
> +
> + def calculate_avg_throughput(self):
> + """
> + calculate the average throughput
> + """
> + results = 0.0
> + for i in range(10):
> + out = self.vhost.send_expect("show port stats all", "testpmd>",
> 60)
> + time.sleep(5)
> + lines = re.search("Rx-pps:\s*(\d*)", out)
> + result = lines.group(1)
> + results += float(result)
> + Mpps = results / (1000000 * 10)
> + self.verify(Mpps > 0, "%s can not receive packets" %
> self.running_case)
> + return Mpps
> +
> + def send_and_verify(self, case_info, frame_size):
> + """
> + start to send packets and calculate the average throughput
> + """
> + # start to send packets
> + self.vhost.send_expect("set txpkts %s" % frame_size, "testpmd>",
> 60)
> + self.vhost.send_expect("start tx_first 32", "testpmd>", 60)
> + Mpps = self.calculate_avg_throughput()
> + self.update_table_info(case_info, frame_size, Mpps, "Before
> + Restart")
> +
> + self.port_restart()
> + Mpps = self.calculate_avg_throughput()
> + self.update_table_info(case_info, frame_size, Mpps, "After
> + Restart")
> +
> + def close_all_testpmd(self):
> + """
> + close testpmd about vhost-user and virtio-user
> + """
> + self.vhost.send_expect("quit", "#", 60)
> + self.virtio_user.send_expect("quit", "#", 60)
> +
> + def close_all_session(self):
> + """
> + close session of vhost-user and virtio-user
> + """
> + self.dut.close_session(self.vhost)
> + self.dut.close_session(self.virtio_user)
> +
> + def test_perf_vhost_loopback_virtio11_mergeable_mac(self):
> + """
> + performance for [frame_sizes] and restart port on virtio1.1
> mergeable path
> + """
> + pmd_arg = {"version": "packed_vq=1,mrg_rxbuf=1 ",
> + "path": "--tx-offloads=0x0
> --enable-hw-vlan-strip "}
> + for frame_size in self.frame_sizes:
> + self.start_vhost_testpmd()
> + self.start_virtio_user_testpmd(pmd_arg)
> + self.send_and_verify("virtio1.1 mergeable", frame_size)
> + self.close_all_testpmd()
> + self.result_table_print()
> +
> + def test_perf_vhost_loopback_virtio11_normal_mac(self):
> + """
> + performance for [frame_sizes] and restart port ob virtio1.1 normal
> path
> + """
> + pmd_arg = {"version": "packed_vq=1,mrg_rxbuf=0 ",
> + "path": "--tx-offloads=0x0
> --enable-hw-vlan-strip "}
> + for frame_size in self.frame_sizes:
> + self.start_vhost_testpmd()
> + self.start_virtio_user_testpmd(pmd_arg)
> + self.send_and_verify("virtio1.1 normal", frame_size)
> + self.close_all_testpmd()
> + self.result_table_print()
> +
Better to add test_perf_vhost_loopback_virtio11_in_order_mac case with "packed_vq=1, in_order=1" which function will enabled in next release dpdk 19.05.
> + def test_perf_vhost_loopback_virtiouser_inorder_mergeable_mac(self):
> + """
> + performance for [frame_sizes] and restart port on inorder
> mergeable path
> + """
> + pmd_arg = {"version": "in_order=1,mrg_rxbuf=1 ",
> + "path": "--tx-offloads=0x0
> --enable-hw-vlan-strip "}
> + for frame_size in self.frame_sizes:
> + self.start_vhost_testpmd()
> + self.start_virtio_user_testpmd(pmd_arg)
> + self.send_and_verify("inorder mergeable", frame_size)
> + self.close_all_testpmd()
> + self.result_table_print()
> +
> + def
> test_perf_vhost_loopback_virtiouser_inorder_mergeable_off_mac(self):
> + """
> + performance for [frame_sizes] and restart port on inorder normal
> path
> + """
> + pmd_arg = {"version": "in_order=1,mrg_rxbuf=0 ",
> + "path": "--tx-offloads=0x0
> --enable-hw-vlan-strip "}
> + for frame_size in self.frame_sizes:
> + self.start_vhost_testpmd()
> + self.start_virtio_user_testpmd(pmd_arg)
> + self.send_and_verify("inorder normal", frame_size)
> + self.close_all_testpmd()
> + self.result_table_print()
> +
> + def test_perf_vhost_loopback_virtiouser_mergeable_mac(self):
> + """
> + performance for [frame_sizes] and restart port on virtio mergeable
> path
> + """
> + pmd_arg = {"version": "in_order=0,mrg_rxbuf=1 ",
> + "path": "--tx-offloads=0x0
> --enable-hw-vlan-strip "}
> + for frame_size in self.frame_sizes:
> + self.start_vhost_testpmd()
> + self.start_virtio_user_testpmd(pmd_arg)
> + self.send_and_verify("virtiouser mergeable", frame_size)
> + self.close_all_testpmd()
> + self.result_table_print()
> +
> + def test_perf_vhost_loopback_virtiouser_normal_mac(self):
> + """
> + performance for [frame_sizes] and restart port on virtio normal
> path
> + """
> + pmd_arg = {"version": "in_order=0,mrg_rxbuf=0 ",
> + "path": "--tx-offloads=0x0
> --enable-hw-vlan-strip "}
> + for frame_size in self.frame_sizes:
> + self.start_vhost_testpmd()
> + self.start_virtio_user_testpmd(pmd_arg)
> + self.send_and_verify("virtiouser normal", frame_size)
> + self.close_all_testpmd()
> + self.result_table_print()
> +
> + def test_perf_vhost_loopback_virtiouser_vector_rx_mac(self):
> + """
> + performance for frame_sizes and restart port on virtio vector rx
> + """
> + pmd_arg = {"version": "in_order=0,mrg_rxbuf=0 ",
> + "path": "--tx-offloads=0x0 "}
> + for frame_size in self.frame_sizes:
> + self.start_vhost_testpmd()
> + self.start_virtio_user_testpmd(pmd_arg)
> + self.send_and_verify("virtiouser vector_rx", frame_size)
> + self.close_all_testpmd()
> + self.result_table_print()
> +
> + def tear_down(self):
> + """
> + Run after each test case.
> + """
> + self.dut.send_expect("killall -s INT testpmd", "#")
> + self.close_all_session()
> + time.sleep(2)
> +
> + def tear_down_all(self):
> + """
> + Run after each test suite.
> + """
> --
> 2.7.4
More information about the dts
mailing list