[dts] [PATCH V3] tests:add tests suite about loadbalancer
changqingxwu
changqingx.wu at intel.com
Fri Mar 15 10:10:23 CET 2019
Signed-off-by: changqingxwu <changqingx.wu at intel.com>
---
tests/TestSuite_loadbalancer.py | 125 ++++++++++++++++++++++++++++++++
1 file changed, 125 insertions(+)
create mode 100644 tests/TestSuite_loadbalancer.py
diff --git a/tests/TestSuite_loadbalancer.py b/tests/TestSuite_loadbalancer.py
new file mode 100644
index 0000000..19fbe67
--- /dev/null
+++ b/tests/TestSuite_loadbalancer.py
@@ -0,0 +1,125 @@
+# <COPYRIGHT_TAG>
+
+"""
+DPDK Test suite.
+
+Test Load Balancer.
+
+"""
+
+import dts
+from packet import Packet
+from test_case import TestCase
+import utils
+import time
+
+
+class TestLoadbalancer(TestCase):
+
+ def set_up_all(self):
+ """
+ Run at the start of each test suite.
+
+ Load Balancer prerequisites.
+ """
+ # Verify that enough ports are available
+ global dutPorts
+ # Based on h/w type, choose how many ports to use
+ dutPorts = self.dut.get_ports(self.nic)
+
+ # Verify that enough ports are available
+ self.verify(len(dutPorts) >= 4, "Insufficient ports for testing")
+
+ cores = self.dut.get_core_list("all")
+ self.verify(len(cores) >= 5, "Insufficient cores for testing")
+ self.cores = self.dut.get_core_list("1S/5C/1T")
+ self.coremask = utils.create_mask(self.cores)
+
+ global rx_port0, rx_port1, rx_port2, rx_port3, trafficFlow
+ rx_port0 = self.tester.get_local_port(dutPorts[0])
+ rx_port1 = self.tester.get_local_port(dutPorts[1])
+ rx_port2 = self.tester.get_local_port(dutPorts[2])
+ rx_port3 = self.tester.get_local_port(dutPorts[3])
+
+ """
+ Designation the traffic flow is the same as LPM rules, send and receive packet verification:
+ 0: 1.0.0.0/24 => 0;
+ 1: 1.0.1.0/24 => 1;
+ 2: 1.0.2.0/24 => 2;
+ 3: 1.0.3.0/24 => 3;
+ """
+ trafficFlow = {
+ "Flow1": [rx_port0, "1.0.0.1"],
+ "Flow2": [rx_port1, "1.0.1.1"],
+ "Flow3": [rx_port2, "1.0.2.1"],
+ "Flow4": [rx_port3, "1.0.3.1"],
+ }
+
+ out = self.dut.send_expect("make -C examples/load_balancer", "#")
+ self.verify("Error" not in out, "compilation error 1")
+ self.verify("No such file" not in out, "compilation error 2")
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ pass
+
+ def test_load_balancer(self):
+ """
+ --rx: Set the receive port, queue and main core;
+ --tx: Set the send port and main core;
+ --w: specify 4 workers lcores,
+ --lpm: IPv4 routing table,
+ --bsz: The number of packet is 10 for transceivers,
+ --pos-lb: Position of the 1-byte header field within the input packet that is used to
+ determine the worker ID for each packet
+ """
+
+ cmd = './examples/load_balancer/build/load_balancer -l {0}-{1} -n 4 -- --rx "(0,0,{2}),(1,0,{2}),(2,0,{2}),(3,0,{2})" '\
+ '--tx "(0,{2}),(1,{2}),(2,{2}),(3,{2})" --w "{3},{4},{5},{6}" '\
+ '--lpm "1.0.0.0/24=>0;1.0.1.0/24=>1;1.0.2.0/24=>2;1.0.3.0/24=>3;" '\
+ '--bsz "(10, 10), (10, 10), (10, 10)" --pos-lb 29'.format(self.cores[0], self.cores[4], self.cores[0], self.cores[1], self.cores[2], self.cores[3], self.cores[4])
+
+ self.dut.send_expect(cmd, 'main loop.')
+
+ # Verify the traffic flow according to Ipv4 route table
+ for flow in trafficFlow.keys():
+ rx_port = trafficFlow[flow][0]
+
+ for i in range(len(dutPorts)):
+ dstport = self.tester.get_local_port(dutPorts[i])
+ pkt_count = 10
+ inst = self.tester.tcpdump_sniff_packets(intf=self.tester.get_interface(rx_port), timeout=10, count=pkt_count)
+
+ pkt = Packet()
+ dst_mac = self.dut.get_mac_address(dutPorts[i])
+ pkt.config_layer('ether', {'dst': dst_mac})
+ pkt.config_layer('ipv4', {'src': "0.0.0.1", 'dst': trafficFlow[flow][1]})
+ pkt.send_pkt(tx_port=self.tester.get_interface(dstport), count=10)
+ # Wait for the sniffer to finish.
+ time.sleep(5)
+
+ pkts = self.tester.load_tcpdump_sniff_packets(inst)
+ len_pkts = len(pkts)
+
+ self.verify(len_pkts == pkt_count, "Packet number is wrong")
+ for packet in pkts:
+ result = str(packet.pktgen.pkt.show)
+ self.verify("Ether" in result, "No packet received")
+ self.verify("src=0.0.0.1" + " dst=" + trafficFlow[flow][1] in result, "Wrong IP address")
+ self.verify("dst=%s" % dst_mac in result, "No packet received or packet missed")
+
+ self.dut.send_expect("^C", "#")
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.dut.kill_all()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ pass
--
2.17.2
More information about the dts
mailing list