[dts] [PATCH v2] test_plans/vf_rss: correct grammar and commands

[Tu, Lijuan]

Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Xueqin Lin
> Sent: Sunday, March 17, 2019 5:30 PM
> To: dts at dpdk.org
> Cc: Lin, Xueqin <xueqin.lin at intel.com>
> Subject: [dts] [PATCH v2] test_plans/vf_rss: correct grammar and commands
> 
> Signed-off-by: Xueqin Lin <xueqin.lin at intel.com>
> 
> 
> ---
>  test_plans/vf_rss_test_plan.rst | 37 +++++++++++++++----------------------
>  1 file changed, 15 insertions(+), 22 deletions(-)
> 
> diff --git a/test_plans/vf_rss_test_plan.rst b/test_plans/vf_rss_test_plan.rst
> index c425227..746b074 100644
> --- a/test_plans/vf_rss_test_plan.rst
> +++ b/test_plans/vf_rss_test_plan.rst
> @@ -40,15 +40,8 @@ Support configuring hash functions.
>  Prerequisites
>  -------------
> 
> -* 2x Intel? 82599 (Niantic) NICs (2x 10GbE full duplex optical ports per NIC)
> -* 1x Fortville_eagle NIC (4x 10G)
> -* 1x Fortville_spirit NIC (2x 40G)
> -* 2x Fortville_spirit_single NIC (1x 40G)
> -
> -The one port of the 82599 connect to the Fortville_eagle; -The one port of
> Fortville_spirit connect to Fortville_spirit_single.
> -The three kinds of NICs are the target NICs. the connected NICs can send
> packets -to these three NICs using scapy.
> +Each of the Ethernet ports of the DUT is directly connected in
> +full-duplex to a different port of the peer traffic generator.
> 
>  Network Traffic
>  ---------------
> @@ -60,19 +53,19 @@ handled by a different logical core.
>  #. The receive packet is parsed into the header fields used by the hash
>     operation (such as IP addresses, TCP port, etc.)
> 
> -#. A hash calculation is performed. The Fortville  supports three hash function:
> +#. A hash calculation is performed. The Fortville supports three hash function:
>     Toeplitz, simple XOR and their Symmetric RSS.
> 
> -#. Hash result are used as an index into a 128/512 entry
> +#. Hash results are used as an index into a 128/512 entry
>     'redirection table'.
> 
> -#. Niantic VF only support simple default hash algorithm(simple). Fortville NIC
> +#. Niantic VF only supports simple default hash algorithm(simple).
> +Fortville NICs
>     support all hash algorithm only used dpdk driver on host. when used kernel
> driver on host,
> -   fortville nic only support default hash algorithm(simple).
> +   fortville NICs only support default hash algorithm(simple).
> 
>  The RSS RETA update feature is designed to make RSS more flexible by allowing
> users to define the correspondence between the seven LSBs of hash result and -
> the queue id(RSS output index) by them self.
> +the queue id(RSS output index) by themself.
> 
> 
>  Test Case:  test_rss_hash
> @@ -100,7 +93,7 @@ interactive commands of the ``testpmd`` application.
> 
>  1. Got the pci device id of DUT, for example::
> 
> -     ./dpdk_nic_bind.py --st
> +     ./usertools/dpdk-devbind.py -s
> 
>       0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e
> unused=
>       0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e
> unused= @@ -109,7 +102,7 @@ interactive commands of the ``testpmd``
> application.
> 
>       echo 1 > /sys/bus/pci/devices/0000\:81\:00.0/sriov_numvfs
>       echo 1 > /sys/bus/pci/devices/0000\:81\:00.1/sriov_numvfs
> -     ./dpdk_nic_bind.py --st
> +     ./usertools/dpdk-devbind.py -s
> 
>       0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e
> unused=
>       0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e
> unused= @@ -135,7 +128,7 @@ interactive commands of the ``testpmd``
> application.
>       virsh nodedev-detach pci_0000_81_02_0;
>       virsh nodedev-detach pci_0000_81_0a_0;
> 
> -     ./dpdk_nic_bind.py --st
> +     ./usertools/dpdk-devbind.py -s
> 
>       0000:81:00.0 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f0 drv=i40e
> unused=
>       0000:81:00.1 'Ethernet Controller X710 for 10GbE SFP+' if=ens259f1 drv=i40e
> unused= @@ -155,7 +148,7 @@ interactive commands of the ``testpmd``
> application.
>     bind them to igb_uio driver, and then start testpmd, set it in mac forward
>     mode::
> 
> -     ./tools/dpdk_nic_bind.py --bind=igb_uio 00:06.0 00:07.0
> +    ./usertools/dpdk-devbind.py --bind=igb_uio 00:06.0 00:07.0
> 
>  6. Reta Configuration.  128 reta entries configuration::
> 
> @@ -167,7 +160,7 @@ interactive commands of the ``testpmd`` application.
> 
>  8. Rss received package type configuration two received packet types
> configuration::
> 
> -     testpmd command: port config 0 rss ip/udp/tcp
> +     testpmd command: port config all rss ip/udp/tcp
> 
>  9. Verbose configuration::
> 
> @@ -177,8 +170,8 @@ interactive commands of the ``testpmd`` application.
> 
>        testpmd command: start
> 
> -11. Send packet and check rx port received packet by different queue.
> -    different hash type send different packet, example hash type is ip, packet src
> and dts ip not different::
> +11. Send different hash types' packets with different keywords, then check rx
> port
> +    could receive packets by different queues::
> 
>        sendp([Ether(dst="90:e2:ba:36:99:3c")/IP(src="192.168.0.4",
> dst="192.168.0.5")], iface="eth3")
>        sendp([Ether(dst="90:e2:ba:36:99:3c")/IP(src="192.168.0.5",
> dst="192.168.0.4")], iface="eth3") @@ -188,6 +181,6 @@ Test Case:  test_reta
> 
>  This case test hash reta table, the test steps same with test_rss_hash except
> config hash reta table
> 
> -Before send packet, config hash reta,512(niantic nic have 128 reta) reta entries
> configuration::
> +Before send packet, config hash reta,512(niantic NICs have 128 reta) reta
> entries configuration::
> 
>    testpmd command: port config 0 rss reta (hash_index,queue_id)
> --
> 2.5.5