[dts] [PATCH] tests/vf_kernel: choose the VF passthrough method by the config

Tu, Lijuan lijuan.tu at intel.com
Sun Mar 24 19:34:42 CET 2019


Applied, thanks

> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of michael.luo at intel.com
> Sent: Sunday, March 17, 2019 6:18 PM
> To: dts at dpdk.org
> Subject: [dts] [PATCH] tests/vf_kernel: choose the VF passthrough method by
> the config
> 
> From: Luo Gaoliang <michael.luo at intel.com>
> 
> Choosing the VF passthrough method to create VMs by the config instead of
> hardcoding it as pci-assign.
> 
> Signed-off-by: Luo Gaoliang <michael.luo at intel.com>
> ---
>  tests/TestSuite_vf_kernel.py | 36 ++++++++++++++++++++++++++----------
>  1 file changed, 26 insertions(+), 10 deletions(-)
> 
> diff --git a/tests/TestSuite_vf_kernel.py b/tests/TestSuite_vf_kernel.py index
> cb3dd51..f80c9e9 100644
> --- a/tests/TestSuite_vf_kernel.py
> +++ b/tests/TestSuite_vf_kernel.py
> @@ -51,6 +51,8 @@ from utils import GREEN, RED
> 
>  class TestVfKernel(TestCase):
> 
> +    supported_vf_driver = ['pci-stub', 'vfio-pci']
> +
>      def set_up_all(self):
>          """
>          Run at the start of each test suite.
> @@ -69,6 +71,16 @@ class TestVfKernel(TestCase):
>          self.intf = self.dut.ports_info[self.dut_ports[0]]['intf']
>          self.pci = self.dut.ports_info[self.dut_ports[0]]['pci'].split(':')
> 
> +        self.vf_driver = self.get_suite_cfg()['vf_driver']
> +        if self.vf_driver is None:
> +            self.vf_driver = 'pci-stub'
> +        self.verify(self.vf_driver in self.supported_vf_driver, "Unspported vf driver")
> +        if self.vf_driver == 'pci-stub':
> +            self.vf_assign_method = 'pci-assign'
> +        else:
> +            self.vf_assign_method = 'vfio-pci'
> +            self.dut.send_expect('modprobe vfio-pci', '#')
> +
>          self.src_logo = '12:34:56:78:90:10'
>          self.setup_vm_env()
> 
> @@ -103,12 +115,16 @@ class TestVfKernel(TestCase):
>          self.sriov_vfs_port = self.dut.ports_info[
>              self.used_dut_port]['vfs_port']
>          for port in self.sriov_vfs_port:
> -            port.bind_driver('pci-stub')
> +            port.bind_driver(self.vf_driver)
>          time.sleep(1)
> 
>          self.dut_testpmd = PmdOutput(self.dut)
> +        eal_param = ''
> +        for sriov_vf in self.sriov_vfs_port:
> +            eal_param += " -b %s" % sriov_vf.pci
>          self.dut_testpmd.start_testpmd(
> -            "Default", "--rxq=4 --txq=4 --port-topology=chained")
> +            "Default", "--rxq=4 --txq=4 --port-topology=chained",
> +            eal_param=eal_param)
>          # dpdk-2208
>          # since there is no forward engine on DPDK PF to forward or drop packet in
> packet pool,
>          # so finally the pool will be full, then no more packet will be @@ -122,10
> +138,10 @@ class TestVfKernel(TestCase):
>          vf0_prop_4 = {'opt_host': self.sriov_vfs_port[3].pci}
> 
>          self.vm0 = QEMUKvm(self.dut, 'vm0', 'vf_kernel')
> -        self.vm0.set_vm_device(driver='pci-assign', **vf0_prop_1)
> -        self.vm0.set_vm_device(driver='pci-assign', **vf0_prop_2)
> -        self.vm0.set_vm_device(driver='pci-assign', **vf0_prop_3)
> -        self.vm0.set_vm_device(driver='pci-assign', **vf0_prop_4)
> +        self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop_1)
> +        self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop_2)
> +        self.vm0.set_vm_device(driver=self.vf_assign_method, **vf0_prop_3)
> +        self.vm0.set_vm_device(driver=self.vf_assign_method,
> + **vf0_prop_4)
>          try:
>              self.vm0_dut = self.vm0.start()
>              if self.vm0_dut is None:
> @@ -140,8 +156,8 @@ class TestVfKernel(TestCase):
>          vf1_prop_5 = {'opt_host': self.sriov_vfs_port[4].pci}
>          vf1_prop_6 = {'opt_host': self.sriov_vfs_port[5].pci}
>          self.vm1 = QEMUKvm(self.dut, 'vm1', 'vf_kernel')
> -        self.vm1.set_vm_device(driver='pci-assign', **vf1_prop_5)
> -        self.vm1.set_vm_device(driver='pci-assign', **vf1_prop_6)
> +        self.vm1.set_vm_device(driver=self.vf_assign_method, **vf1_prop_5)
> +        self.vm1.set_vm_device(driver=self.vf_assign_method,
> + **vf1_prop_6)
> 
>          try:
>              self.vm1_dut = self.vm1.start() @@ -740,8 +756,8 @@ class
> TestVfKernel(TestCase):
>          vf1_prop_5 = {'opt_host': self.sriov_vfs_port[4].pci}
>          vf1_prop_6 = {'opt_host': self.sriov_vfs_port[5].pci}
>          self.vm1 = QEMUKvm(self.dut, 'vm1', 'vf_kernel')
> -        self.vm1.set_vm_device(driver='pci-assign', **vf1_prop_5)
> -        self.vm1.set_vm_device(driver='pci-assign', **vf1_prop_6)
> +        self.vm1.set_vm_device(driver=self.vf_assign_method, **vf1_prop_5)
> +        self.vm1.set_vm_device(driver=self.vf_assign_method,
> + **vf1_prop_6)
> 
>          try:
>              self.vm1_dut = self.vm1.start()
> --
> 2.7.4



More information about the dts mailing list