[dts] [PATCH V2] add testplan of vxlan gpe support in i40e
Ma, LihongX
lihongx.ma at intel.com
Sun May 5 05:00:17 CEST 2019
Tested-by:malihong<lihongx.ma at intel.com>
-----Original Message-----
From: Zhang, Yuwei1
Sent: Thursday, April 25, 2019 9:41 AM
To: Ma, LihongX <lihongx.ma at intel.com>; dts at dpdk.org
Subject: RE: [dts][PATCH V2] add testplan of vxlan gpe support in i40e
Acked-by: Yuwei Zhang (yuwei1.zhang at intel.com)
-----Original Message-----
From: Ma, LihongX
Sent: Thursday, April 25, 2019 2:07 AM
To: dts at dpdk.org
Cc: Zhang, Yuwei1 <yuwei1.zhang at intel.com>; Ma, LihongX <lihongx.ma at intel.com>
Subject: [dts][PATCH V2] add testplan of vxlan gpe support in i40e
Signed-off-by: lihong <lihongx.ma at intel.com>
---
test_plans/vxlan_gpe_support_in_i40e.rst | 120 +++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 test_plans/vxlan_gpe_support_in_i40e.rst
diff --git a/test_plans/vxlan_gpe_support_in_i40e.rst b/test_plans/vxlan_gpe_support_in_i40e.rst
new file mode 100644
index 0000000..02be05e
--- /dev/null
+++ b/test_plans/vxlan_gpe_support_in_i40e.rst
@@ -0,0 +1,120 @@
+.. Copyright (c) <2016-2019> Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+============================
+I40E VXLAN-GPE Support Tests
+============================
+
+Prerequisites
+=============
+
+1. The DUT has at least 2 DPDK supported I40E NIC ports::
+
+ Tester DUT
+ eth1 <---> PORT 0
+ eth2 <---> PORT 1
+
+2. Support igb_uio driver::
+
+ modprobe uio
+ insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
+ ./usertools/dpdk-devbind.py --bind=igb_uio 04:00.0 04:00.1
+
+Test Case 1: VXLAN-GPE ipv4 packet detect
+=========================================
+1. Start testpmd::
+
+ # testpmd -c 0xf -n 4 -- -i
+
+2. Add VXLAN-GPE packet type support in test pmd and enable verbose log::
+
+ testpmd> set fwd io
+ testpmd> set verbose 1
+ testpmd> port config 0 udp_tunnel_port add vxlan-gpe 4790
+
+3. Send VXLAN-GPE packets to testpmd and check received packets::
+
+ scapy> pkt=Ether(dst="3C:FD:FE:A8:C8:20")/IP(src="18.0.0.1")/UDP(dport=4790,sport=43)/VXLAN(flags=12)/IP(src="10.0.0.1")
+ scapy> sendp(pkt1, iface="ens802f1", count=1)
+
+4. Expected output from testpmd::
+
+ src=00:00:00:00:00:00 - dst=3C:FD:FE:A8:C8:20 - type=0x0800 - length=70 - nb_segs=1 - RSS hash=0x51ed6fc5 - RSS
+ queue=0x2 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN TUNNEL_GRENAT INNER_L3_IPV4_EXT_UNKNOWN
+ INNER_L4_NONFRAG - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8
+ - VXLAN packet: packet type =24721, Destination UDP port =4790, VNI
+ = 0 - Receive queue=0x2
+
+Test Case 2: VXLAN-GPE tunnel remove test
+=========================================
+1. After Test Case 1, delete the VXLAN-GPE packet type::
+
+ testpmd> port config 0 udp_tunnel_port rm vxlan-gpe 4790
+
+2. Send VXLAN-GPE packets to testpmd and check the received packets
+
+3. Expected result::
+
+ testpmd should treat the packet as a normal UDP packet
+
+Test Case 3: Tunnel filter VXLAN-GPE support
+============================================
+1. Start testpmd with tunneling packet type to vxlan and disable receive side
+ scale for hardware limitation::
+
+ # testpmd -c ffff -n 4 -- -i --disable-rss --rxq=4 --txq=4
+ --nb-cores=8 --nb-ports=2 --tx-offloads=0x8fff
+
+2. Set rxonly packet forwarding mode and enable verbose log::
+
+ testpmd> set fwd rxonly
+ testpmd> set verbose 1
+
+3. Add one new Cloud filter as table listed first::
+
+ testpmd> tunnel_filter add 0 11:22:33:44:55:66 00:00:20:00:00:01
+ 192.168.2.2 1 vxlan-gpe imac-ivlan 1 3
+
+4. Then send one packet and check packet was forwarded into right queue.
+
++------------+------------+------------+----------+----------+--------+-------+
+| Outer Mac | Inner Mac | Inner Vlan | Outer Ip | Inner Ip | Vni ID |
+| Queue |
++------------+------------+------------+----------+----------+--------+-------+
+| No | Yes | Yes | No | No | No | 1 |
++------------+------------+------------+----------+----------+--------+-------+
+| No | Yes | Yes | No | No | Yes | 1 |
++------------+------------+------------+----------+----------+--------+-------+
+| No | Yes | No | No | No | Yes | 1 |
++------------+------------+------------+----------+----------+--------+-------+
+| No | Yes | No | No | No | No | 1 |
++------------+------------+------------+----------+----------+--------+-------+
+| Yes | Yes | No | No | Yes | Yes | 1 |
++------------+------------+------------+----------+----------+--------+-------+
+| No | No | No | No | Yes | No | 1 |
++------------+------------+------------+----------+----------+--------+-------+
--
2.7.4
More information about the dts
mailing list