[dts] [PATCH] test_plans/qinq_filter: remove useless tx offload and fix case description error
Xueqin Lin
xueqin.lin at intel.com
Tue May 21 05:42:08 CEST 2019
From: "xueqin.lin" <xueqin.lin at intel.com>
Signed-off-by: Xueqin Lin <xueqin.lin at intel.com>
---
test_plans/qinq_filter_test_plan.rst | 32 ++++++++++++++++----------------
1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/test_plans/qinq_filter_test_plan.rst b/test_plans/qinq_filter_test_plan.rst
index b8d7c34..fa995f3 100644
--- a/test_plans/qinq_filter_test_plan.rst
+++ b/test_plans/qinq_filter_test_plan.rst
@@ -56,7 +56,7 @@ Testpmd configuration - 4 RX/TX queues per port
#. set up testpmd with fortville NICs::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 -- -i --rxq=4 --txq=4 --tx-offloads=0x8fff --disable-rss
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 -- -i --rxq=4 --txq=4 --disable-rss
#. enable qinq::
@@ -89,7 +89,7 @@ Testpmd configuration - 4 RX/TX queues per port
#. set up testpmd with fortville NICs::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 -- -i --rxq=4 --txq=4 --tx-offloads=0x8fff --disable-rss
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 -- -i --rxq=4 --txq=4 --disable-rss
#. enable qinq::
@@ -118,7 +118,7 @@ tester Configuration
#. send dual vlan packet with scapy, verify packets can filter to queues::
sendp([Ether(dst="3C:FD:FE:A3:A0:AE")/Dot1Q(type=0x8100,vlan=1)/Dot1Q(type=0x8100,vlan=4093)/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)], iface="eth17")
- sendp([Ether(dst="3C:FD:FE:A3:A0:AE")/Dot1Q(type=0x8100,vlan=2)/Dot1Q(type=0x8100,vlan=4093)/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)], iface="eth17")
+ sendp([Ether(dst="3C:FD:FE:A3:A0:AE")/Dot1Q(type=0x8100,vlan=2)/Dot1Q(type=0x8100,vlan=4094)/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)], iface="eth17")
Test Case 3: qinq packet filter to VF queues
============================================
@@ -126,13 +126,13 @@ Test Case 3: qinq packet filter to VF queues
linux cmdline: echo 2 > /sys/bus/pci/devices/0000:81:00.0/max_vfs
-#. bind igb_uio to vfs
+#. bind igb_uio to vfs::
linux cmdline: ./usertools/dpdk-devbind.py -b igb_uio 81:02.0 81:02.1
#. set up testpmd with fortville PF NICs::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 --socket-mem=1024,1024 --file-prefix=pf -w 81:00.0 -- -i --rxq=4 --txq=4 --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 --socket-mem=1024,1024 --file-prefix=pf -w 81:00.0 -- -i --rxq=4 --txq=4
#. enable qinq::
@@ -158,7 +158,7 @@ Test Case 3: qinq packet filter to VF queues
#. set up testpmd with fortville VF0 NICs::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e0 -n 4 --socket-mem=1024,1024 --file-prefix=vf0 -w 81:02.0 -- -i --rxq=4 --txq=4 --rss-udp
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e0 -n 4 --socket-mem=1024,1024 --file-prefix=vf0 -w 81:02.0 -- -i --rxq=4 --txq=4
#. PMD fwd only receive the packets::
@@ -172,9 +172,9 @@ Test Case 3: qinq packet filter to VF queues
testpmd command: start
-#. set up testpmd with fortville VF0 NICs::
+#. set up testpmd with fortville VF1 NICs::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7c0 -n 4 --socket-mem=1024,1024 --file-prefix=vf1 -w 81:02.0 -- -i --rxq=4 --txq=4 --rss-udp
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7c0 -n 4 --socket-mem=1024,1024 --file-prefix=vf1 -w 81:02.1 -- -i --rxq=4 --txq=4
#. PMD fwd only receive the packets::
@@ -193,7 +193,7 @@ tester Configuration
#. send dual vlan packet with scapy, verify packets can filter to the corresponding PF and VF queues::
- sendp([Ether(dst="3C:FD:FE:A3:A0:AE")/Dot1Q(type=0x8100,vlan=1)/Dot1Q(type=0x8100,vlan=4094)/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)], iface="eth17")
+ sendp([Ether(dst="3C:FD:FE:A3:A0:AE")/Dot1Q(type=0x8100,vlan=1)/Dot1Q(type=0x8100,vlan=4093)/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)], iface="eth17")
sendp([Ether(dst="3C:FD:FE:A3:A0:AE")/Dot1Q(type=0x8100,vlan=2)/Dot1Q(type=0x8100,vlan=4094)/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)], iface="eth17")
sendp([Ether(dst="3C:FD:FE:A3:A0:AE")/Dot1Q(type=0x8100,vlan=3)/Dot1Q(type=0x8100,vlan=4094)/IP(src="192.168.0.1", dst="192.168.0.2")/Raw('x' * 20)], iface="eth17")
@@ -203,13 +203,13 @@ Test Case 4: qinq packet filter with different tpid
linux cmdline: echo 2 > /sys/bus/pci/devices/0000:81:00.0/max_vfs
-#. bind igb_uio to vfs
+#. bind igb_uio to vfs::
linux cmdline: ./usertools/dpdk-devbind.py -b igb_uio 81:02.0 81:02.1
#. set up testpmd with fortville PF NICs::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 --socket-mem=1024,1024 --file-prefix=pf -w 81:00.0 -- -i --rxq=4 --txq=4 --tx-offloads=0x8fff
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x1f -n 4 --socket-mem=1024,1024 --file-prefix=pf -w 81:00.0 -- -i --rxq=4 --txq=4
#. enable qinq::
@@ -239,7 +239,7 @@ Test Case 4: qinq packet filter with different tpid
#. set up testpmd with fortville VF0 NICs::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e0 -n 4 --socket-mem=1024,1024 --file-prefix=vf0 -w 81:02.0 -- -i --rxq=4 --txq=4 --rss-udp
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x3e0 -n 4 --socket-mem=1024,1024 --file-prefix=vf0 -w 81:02.0 -- -i --rxq=4 --txq=4
#. PMD fwd only receive the packets::
@@ -253,9 +253,9 @@ Test Case 4: qinq packet filter with different tpid
testpmd command: start
-#. set up testpmd with fortville VF0 NICs::
+#. set up testpmd with fortville VF1 NICs::
- ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7c0 -n 4 --socket-mem=1024,1024 --file-prefix=vf1 -w 81:02.0 -- -i --rxq=4 --txq=4 --rss-udp
+ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x7c0 -n 4 --socket-mem=1024,1024 --file-prefix=vf1 -w 81:02.1 -- -i --rxq=4 --txq=4
#. PMD fwd only receive the packets::
@@ -272,8 +272,8 @@ Test Case 4: qinq packet filter with different tpid
tester Configuration
--------------------
-#. send dual vlan packet with scapy, verify packets can filter to the corresponding VF queues::
-7. send qinq packet with traffic generator, verify packets can filter to the corresponding VF queues.
+#. send dual vlan packet with scapy, verify packets can filter to the corresponding VF queues.
+#. send qinq packet with traffic generator, verify packets can filter to the corresponding VF queues.
Note
====================================================
--
2.7.5
More information about the dts
mailing list