[dts] [PATCH V2] tests/port_representor:new automation of port_representor
Zeng, XiaoxiaoX
xiaoxiaox.zeng at intel.com
Mon Nov 18 04:03:14 CET 2019
Tested-by: Zeng,XiaoxiaoX< xiaoxiaox.zeng at intel.com>
-----Original Message-----
From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of Xie Wei
Sent: Monday, November 18, 2019 10:54 AM
To: dts at dpdk.org
Cc: Xie, WeiX <weix.xie at intel.com>
Subject: [dts] [PATCH V2] tests/port_representor:new automation of port_representor
new automation of port_representor
Signed-off-by: Xie Wei <weix.xie at intel.com>
---
tests/TestSuite_port_representor.py | 270 ++++++++++++++++++++++++++++
1 file changed, 270 insertions(+)
create mode 100644 tests/TestSuite_port_representor.py
diff --git a/tests/TestSuite_port_representor.py b/tests/TestSuite_port_representor.py
new file mode 100644
index 0000000..04f7838
--- /dev/null
+++ b/tests/TestSuite_port_representor.py
@@ -0,0 +1,270 @@
+# BSD LICENSE
+#
+# Copyright(c) <2019> Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without #
+modification, are permitted provided that the following conditions #
+are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS #
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT #
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT #
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT #
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
+THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT #
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+"""
+Use two representor ports as the control plane to manage the two VFs,
+the control plane could change VFs behavior such as change promiscous
+mode, stats reset, etc. our statistical data information is independent
+on the control plane and data plane.
+"""
+
+import time
+import re
+
+from test_case import TestCase
+from dut import Dut
+from packet import Packet
+from pmd_output import PmdOutput
+
+
+class TestPortRepresentor(TestCase):
+ def set_up_all(self):
+ """
+ Prerequisite steps for each test suite.
+ """
+ self.verify(self.nic in ["fortville_eagle", "fortville_spirit",
+ "fortville_spirit_single", "fortville_25g"], "NIC Unsupported: " + str(self.nic))
+ self.dut_ports = self.dut.get_ports(self.nic)
+ self.verify(len(self.dut_ports) >= 1, "Insufficient ports")
+
+ self.session_secondary = self.dut.new_session()
+ self.session_third = self.dut.new_session()
+ self.pmdout_pf = PmdOutput(self.dut)
+ self.pmdout_vf0 = PmdOutput(self.dut, self.session_secondary)
+ self.pmdout_vf1 = PmdOutput(self.dut, self.session_third)
+
+ localPort = self.tester.get_local_port(self.dut_ports[0])
+ self.tester_itf = self.tester.get_interface(localPort)
+ self.tester_mac = self.tester.get_mac(localPort)
+ self.pf_mac = self.dut.get_mac_address(0)
+ self.pf_pci = self.dut.ports_info[self.dut_ports[0]]['pci']
+
+ self.unicast_mac = "00:11:22:33:44:55"
+
+ # This is to set up 1pf and 2vfs environment
+ # PF is bound to igb_uio, while VF is bound to vfio-pci.
+ self.dut.generate_sriov_vfs_by_port(self.dut_ports[0], 2, "igb_uio")
+ self.two_vfs_port = self.dut.ports_info[self.dut_ports[0]]["vfs_port"]
+ self.dut.send_expect("modprobe vfio-pci", "#", 3)
+ try:
+ for port in self.two_vfs_port:
+ port.bind_driver(driver="vfio-pci")
+ except Exception as e:
+ self.destroy_env()
+ raise Exception(e)
+ self.vfs_pci =
+ self.dut.ports_info[self.dut_ports[0]]['sriov_vfs_pci']
+
+ def set_up(self):
+ """
+ Run before each test case.
+ """
+ self.vf_flag = 1
+
+ def destroy_env(self):
+ """
+ This is to stop testpmd and destroy 1pf and 2vfs environment.
+ """
+ if self.vf_flag == 1:
+ self.pmdout_vf1.execute_cmd("quit", "#")
+ time.sleep(3)
+ self.pmdout_vf0.execute_cmd("quit", "#")
+ time.sleep(3)
+ self.pmdout_pf.execute_cmd("quit", "#")
+ time.sleep(3)
+ else:
+ self.pmdout_pf.execute_cmd("quit", "#")
+ self.vf_flag = 0
+
+ def testpmd_pf(self):
+ self.pmdout_pf.start_testpmd("Default", eal_param="-w
+ %s,representor=0-1" % self.pf_pci, param="--port-topology=chained")
+
+ def testpmd_vf0(self):
+ self.out_vf0 = self.pmdout_vf0.start_testpmd("Default", eal_param="-w %s --file-prefix testpmd-vf0" % self.vfs_pci[0])
+ self.vf0_mac = self.pmdout_vf0.get_port_mac(0)
+
+ def testpmd_vf1(self):
+ self.out_vf1 = self.pmdout_vf1.start_testpmd("Default", eal_param="-w %s --file-prefix testpmd-vf1" % self.vfs_pci[1])
+ self.vf1_mac = self.pmdout_vf1.get_port_mac(0)
+
+ def check_port_stats(self):
+ """
+ show and check port stats
+ """
+ out = self.pmdout_pf.execute_cmd("show port stats all", "testpmd>")
+ self.logger.info(out)
+ result = re.compile('RX-packets:\s+(.*?)\s+?').findall(out, re.S)
+ return result
+
+ def clear_port_stats(self):
+ """
+ clear port stats in control testpmd
+ """
+ self.pmdout_pf.execute_cmd("clear vf stats 0 0", "testpmd>", 2)
+ self.pmdout_pf.execute_cmd("clear vf stats 0 1", "testpmd>", 2)
+ self.pmdout_pf.execute_cmd("clear port stats all", "testpmd>",
+ 2)
+
+ def test_port_representor_vf_stats_show_and_clear(self):
+ """
+ use control testpmd to get and clear dataplane testpmd ports Stats
+ """
+ self.testpmd_pf()
+ self.pmdout_pf.execute_cmd("set promisc 0 off", "testpmd>")
+ self.pmdout_pf.execute_cmd("start", "testpmd>", 2)
+ self.testpmd_vf0()
+ self.pmdout_vf0.execute_cmd("set promisc 0 off", "testpmd>")
+ self.pmdout_vf0.execute_cmd("start", "testpmd>", 2)
+ self.testpmd_vf1()
+ self.pmdout_vf1.execute_cmd("set promisc 0 off", "testpmd>")
+ self.pmdout_vf1.execute_cmd("start", "testpmd>", 2)
+ # send 30 packets
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkts = [pkt1, pkt2, pkt3]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+ # check port stats in control testpmd
+ result_before = self.check_port_stats()
+ self.verify(int(result_before[1]) == 10 and int(result_before[2]) == 10, "VF Stats show error")
+ self.clear_port_stats()
+ result_after = self.check_port_stats()
+ self.verify(int(result_after[1]) == 0 and int(result_after[2])
+ == 0, "VF Stats clear error")
+
+ def test_port_representor_vf_promiscous(self):
+ """
+ use control testpmd to enable/disable dataplane testpmd ports promiscous mode
+ """
+ self.testpmd_pf()
+ self.pmdout_pf.execute_cmd("set promisc 0 off", "testpmd>")
+ self.pmdout_pf.execute_cmd("start", "testpmd>", 2)
+ self.testpmd_vf0()
+ self.pmdout_vf0.execute_cmd("start", "testpmd>", 2)
+ self.testpmd_vf1()
+ self.pmdout_vf1.execute_cmd("start", "testpmd>", 2)
+
+ # set vf promisc enable and send 40 packets
+ self.pmdout_pf.execute_cmd("set promisc 1 on", "testpmd>")
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkt4 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.unicast_mac)
+ pkts = [pkt1, pkt2, pkt3, pkt4]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+ # check port stats in control testpmd
+ result_enable = self.check_port_stats()
+ self.verify(int(result_enable[1]) == 20 and int(result_enable[2]) == 20, "VFs receive packets error")
+ self.clear_port_stats()
+ # set vf promisc disable and send 40 packets
+ self.pmdout_pf.execute_cmd("set promisc 1 off", "testpmd>")
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+ # check port stats in control testpmd
+ result_disable = self.check_port_stats()
+ self.verify(int(result_disable[1]) == 10 and
+ int(result_disable[2]) == 20, "VFs receive packets error")
+
+ def test_port_representor_vf_mac_addr(self):
+ """
+ use control testpmd to set vf mac address
+ """
+ self.testpmd_pf()
+ self.pmdout_pf.execute_cmd("mac_addr set 1 aa:11:22:33:44:55", "testpmd>")
+ self.pmdout_pf.execute_cmd("mac_addr set 2 aa:22:33:44:55:66", "testpmd>")
+ self.pmdout_pf.execute_cmd("set promisc 0 off", "testpmd>")
+ self.pmdout_pf.execute_cmd("start", "testpmd>", 2)
+ self.testpmd_vf0()
+ self.pmdout_vf0.execute_cmd("set promisc 0 off", "testpmd>")
+ self.pmdout_vf0.execute_cmd("start", "testpmd>", 2)
+ self.testpmd_vf1()
+ self.pmdout_vf1.execute_cmd("set promisc 0 off", "testpmd>")
+ self.pmdout_vf1.execute_cmd("start", "testpmd>", 2)
+ # send 40 packets
+ pkt1 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.pf_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt3 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.vf1_mac)
+ pkt4 = 'Ether(src="%s",dst="%s")/IP()' % (self.tester_mac, self.unicast_mac)
+ pkts = [pkt1, pkt2, pkt3, pkt4]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+ # check port stats in control testpmd
+ result = self.check_port_stats()
+ self.verify(int(result[1]) == 10 and int(result[2]) == 10, "VFs
+ receive packets error")
+
+ def test_port_representor_vlan_filter(self):
+ """
+ use control testpmd to set vlan
+ """
+ self.testpmd_pf()
+ self.pmdout_pf.execute_cmd("set promisc 1 off", "testpmd>")
+ self.pmdout_pf.execute_cmd("vlan set filter on 1", "testpmd>")
+ self.pmdout_pf.execute_cmd("rx_vlan add 3 1", "testpmd>")
+ self.pmdout_pf.execute_cmd("set promisc 2 off", "testpmd>")
+ self.pmdout_pf.execute_cmd("vlan set filter on 2", "testpmd>")
+ self.pmdout_pf.execute_cmd("rx_vlan add 4 2", "testpmd>")
+ self.pmdout_pf.execute_cmd("start", "testpmd>", 2)
+ self.testpmd_vf0()
+ self.pmdout_vf0.execute_cmd("start", "testpmd>", 2)
+ self.testpmd_vf1()
+ self.pmdout_vf1.execute_cmd("start", "testpmd>", 2)
+ # send 20 packets
+ pkt1 = 'Ether(src="%s",dst="%s")/Dot1Q(vlan=3)/IP()' % (self.tester_mac, self.vf0_mac)
+ pkt2 = 'Ether(src="%s",dst="%s")/Dot1Q(vlan=4)/IP()' % (self.tester_mac, self.vf1_mac)
+ pkts = [pkt1, pkt2]
+ p = Packet()
+ for i in pkts:
+ p.append_pkt(i)
+ p.send_pkt(self.tester, tx_port=self.tester_itf, count=10)
+ # check port stats in control testpmd
+ result = self.check_port_stats()
+ self.verify(int(result[1]) == 10 and int(result[2]) == 10, "VFs
+ receive packets error")
+
+ def tear_down(self):
+ """
+ Run after each test case.
+ """
+ self.destroy_env()
+
+ def tear_down_all(self):
+ """
+ Run after each test suite.
+ """
+ self.dut.kill_all()
+ self.dut.destroy_sriov_vfs_by_port(self.dut_ports[0])
+ self.dut.close_session(self.session_secondary)
+ self.dut.close_session(self.session_third)
--
2.17.2
-------------- next part --------------
A non-text attachment was scrubbed...
Name: TestPortRepresentor.log
Type: application/octet-stream
Size: 52728 bytes
Desc: TestPortRepresentor.log
URL: <http://mails.dpdk.org/archives/dts/attachments/20191118/7372a9ad/attachment.obj>
More information about the dts
mailing list