[dts] [PATCH] tests/TestSuite_vxlan: Enable CVL25Gand100g NIC to support VXLAN case
Tu, Lijuan
lijuan.tu at intel.com
Wed Sep 4 07:25:48 CEST 2019
Applied, thanks
> -----Original Message-----
> From: dts [mailto:dts-bounces at dpdk.org] On Behalf Of zhiwei.he
> Sent: Thursday, August 29, 2019 1:46 PM
> To: dts at dpdk.org
> Cc: He, Zhiwei <zhiwei.he at intel.com>
> Subject: [dts] [PATCH] tests/TestSuite_vxlan: Enable CVL25Gand100g NIC to
> support VXLAN case
>
> From: "zhiwei.he" <zhiwei.he at intel.com>
>
> Signed-off-by: zhiwei.he <zhiwei.he at intel.com>
> ---
> tests/TestSuite_vxlan.py | 76 +++++++++++++++++++++++++++++-----------------
> --
> 1 file changed, 46 insertions(+), 30 deletions(-)
>
> diff --git a/tests/TestSuite_vxlan.py b/tests/TestSuite_vxlan.py index
> ecc3f3a..3bc8071 100644
> --- a/tests/TestSuite_vxlan.py
> +++ b/tests/TestSuite_vxlan.py
> @@ -266,6 +266,8 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
> self.compile_switch = 'CONFIG_RTE_LIBRTE_I40E_INC_VECTOR'
> elif self.nic in ["sageville", "sagepond"]:
> self.compile_switch = 'CONFIG_RTE_IXGBE_INC_VECTOR'
> + elif self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> else:
> self.verify(False, "%s not support this vxlan" % self.nic)
> # Based on h/w type, choose how many ports to use @@ -533,13
> +535,17 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
> """
> verify vxlan packet detection
> """
> - out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> - src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> - if src_vec_model == 'y':
> - self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> - + "%s=n/' config/common_base" % self.compile_switch,
> "# ", 30)
> - self.dut.skip_setup = False
> - self.dut.build_install_dpdk(self.target)
> + if self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> + src_vec_model = 'n'
> + else:
> + out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> + src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> + if src_vec_model == 'y':
> + self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> + + "%s=n/' config/common_base" % self.compile_switch,
> "# ", 30)
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.target)
>
>
> pmd_temp = "./%(TARGET)s/app/testpmd -c %(COREMASK)s -n " + \
> @@ -571,26 +577,33 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
>
> out = self.dut.send_expect("stop", "testpmd>", 10)
> self.dut.send_expect("quit", "#", 10)
> -
> - out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> - dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> - if src_vec_model != dst_vec_model:
> - self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> - + "%s=%s/' config/common_base" % (self.compile_switch,
> src_vec_model), "# ", 30)
> - self.dut.skip_setup = False
> - self.dut.build_install_dpdk(self.target)
> + if self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> + src_vec_model = 'n'
> + else:
> + out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> + dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> + if src_vec_model != dst_vec_model:
> + self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> + + "%s=%s/' config/common_base" %
> (self.compile_switch, src_vec_model), "# ", 30)
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.target)
>
> def test_vxlan_ipv6_detect(self):
> """
> verify vxlan packet detection with ipv6 header
> """
> - out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> - src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> - if src_vec_model == 'y':
> - self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> - + "%s=n/' config/common_base" % self.compile_switch,
> "# ", 30)
> - self.dut.skip_setup = False
> - self.dut.build_install_dpdk(self.target)
> + if self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> + src_vec_model = 'n'
> + else:
> + out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> + src_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> + if src_vec_model == 'y':
> + self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> + + "%s=n/' config/common_base" % self.compile_switch,
> "# ", 30)
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.target)
>
> pmd_temp = "./%(TARGET)s/app/testpmd -c %(COREMASK)s -n " + \
> "%(CHANNEL)d -- -i --disable-rss --rxq=4 --txq=4" + \ @@ -625,14
> +638,17 @@ class TestVxlan(TestCase, IxiaPacketGenerator):
>
> out = self.dut.send_expect("stop", "testpmd>", 10)
> self.dut.send_expect("quit", "#", 10)
> -
> - out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> - dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> - if src_vec_model != dst_vec_model:
> - self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> - + "%s=%s/' config/common_base" % (self.compile_switch,
> src_vec_model), "# ", 30)
> - self.dut.skip_setup = False
> - self.dut.build_install_dpdk(self.target)
> + if self.nic in ["columbiaville_25g","columbiaville_100g"]:
> + print "CVL support default none VECTOR"
> + src_vec_model = 'n'
> + else:
> + out = self.dut.send_expect("cat config/common_base", "]# ", 10)
> + dst_vec_model = re.findall("%s=." % self.compile_switch, out)[0][-1]
> + if src_vec_model != dst_vec_model:
> + self.dut.send_expect("sed -i -e 's/%s=.*$/" % self.compile_switch
> + + "%s=%s/' config/common_base" %
> (self.compile_switch, src_vec_model), "# ", 30)
> + self.dut.skip_setup = False
> + self.dut.build_install_dpdk(self.target)
>
> def test_vxlan_ipv4_checksum_offload(self):
> """
> --
> 1.8.3.1
More information about the dts
mailing list