[dts] [PATCH V1]test_plans/vhost_enqueue_interrupt_test_plan: remove old testplan
Xiao Qimai
qimaix.xiao at intel.com
Thu Aug 27 11:41:08 CEST 2020
*. test_plans/vhost_enqueue_interrupt_test_plan has been replaced by test_plans/vhost_user_interrupt_test_plan.rst
Signed-off-by: Xiao Qimai <qimaix.xiao at intel.com>
---
.../vhost_enqueue_interrupt_test_plan.rst | 145 ------------------
1 file changed, 145 deletions(-)
delete mode 100644 test_plans/vhost_enqueue_interrupt_test_plan.rst
diff --git a/test_plans/vhost_enqueue_interrupt_test_plan.rst b/test_plans/vhost_enqueue_interrupt_test_plan.rst
deleted file mode 100644
index ee9b7a5d..00000000
--- a/test_plans/vhost_enqueue_interrupt_test_plan.rst
+++ /dev/null
@@ -1,145 +0,0 @@
-.. Copyright (c) <2019>, Intel Corporation
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
- - Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- OF THE POSSIBILITY OF SUCH DAMAGE.
-
-======================================
-vhost enqueue interrupt mode test plan
-======================================
-
-Description
-===========
-
-Vhost enqueue interrupt need test with l3fwd-power sample, small packets send from virtio-user to vhost sideï¼
-check vhost-user cores can be wakeupï¼and vhost-user cores should be back to sleep after stop sending packets
-from virtio side.
-
-Prerequisites
-=============
-
-Modify l3fwd-power example code and recompile::
-
- --- a/examples/l3fwd-power/main.c
- +++ b/examples/l3fwd-power/main.c
- @@ -248,7 +248,6 @@ static struct rte_eth_conf port_conf = {
- .mq_mode = ETH_MQ_RX_RSS,
- .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
- .split_hdr_size = 0,
- - .offloads = DEV_RX_OFFLOAD_CHECKSUM,
- },
- .rx_adv_conf = {
- .rss_conf = {
-
-Test flow
-=========
-
-Virtio-user --> Vhost-user
-
-Test Case1: Wake up split ring vhost-user core with l3fwd-power sample
-======================================================================
-
-1. Launch virtio-user with server mode::
-
- ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1 -- -i
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
- ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
- --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)"
-
-3. Send packet by testpmd, check vhost-user core will keep wakeup status::
-
- testpmd>set fwd txonly
- testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user core will sleep and wakeup again.
-
-Test Case2: Wake up split ring vhost-user cores with l3fwd-power sample when multi queues are enabled
-=====================================================================================================
-
-1. Launch virtio-user with server mode::
-
- ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4 -- -i --rxq=4 --txq=4 --rss-ip
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
- ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --log-level=9 \
- --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \
- --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
-
-3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status::
-
- testpmd>set fwd txonly
- testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again.
-
-Test Case3: Wake up packed ring vhost-user core with l3fwd-power sample
-=======================================================================
-
-1. Launch virtio-user with server mode::
-
- ./testpmd -l 7-8 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=1,packed_vq=1 -- -i
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
- ./l3fwd-power -l 0-3 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci \
- --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1,client=1' -- -p 0x1 --parse-ptype 1 --config "(0,0,2)"
-
-3. Send packet by testpmd, check vhost-user core will keep wakeup status::
-
- testpmd>set fwd txonly
- testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user core will sleep and wakeup again.
-
-Test Case4: Wake up packed ring vhost-user cores with l3fwd-power sample when multi queues are enabled
-=======================================================================================================
-
-1. Launch virtio-user with server mode::
-
- ./testpmd -l 1-5 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --file-prefix=virtio \
- --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=/tmp/sock0,server=1,queues=4,packed_vq=1,mrg_rxbuf=0 -- -i --rxq=4 --txq=4 --rss-ip
-
-2. Build l3fwd-power sample and launch l3fwd-power with a virtual vhost device::
-
- ./l3fwd-power -l 9-12 -n 4 --socket-mem 1024,1024 --legacy-mem --no-pci --log-level=9 \
- --vdev 'eth_vhost0,iface=/tmp/sock0,queues=4,client=1' -- -p 0x1 --parse-ptype 1 \
- --config "(0,0,9),(0,1,10),(0,2,11),(0,3,12)"
-
-3. Send packet by testpmd, check vhost-user multi-cores will keep wakeup status::
-
- testpmd>set fwd txonly
- testpmd>start
-
-4. Stop and restart testpmd again, check vhost-user cores will sleep and wakeup again.
--
2.25.1
More information about the dts
mailing list