[dts] [PATCH V1]cvl_fdir_test_plan.rst: update cvl 25g max rules and add steps in port_stop_start_reset

[Xiao, QimaiX]

Tested-by: Xiao, QimaiX <qimaix.xiao at intel.com>

Regards,
Xiao Qimai

> -----Original Message-----
> From: Xiao, QimaiX <qimaix.xiao at intel.com>
> Sent: Thursday, June 11, 2020 12:42 PM
> To: dts at dpdk.org
> Cc: Xiao, QimaiX <qimaix.xiao at intel.com>
> Subject: [dts][PATCH V1]cvl_fdir_test_plan.rst: update cvl 25g max rules and
> add steps in port_stop_start_reset
> 
> Signed-off-by: Xiao Qimai <qimaix.xiao at intel.com>
> ---
>  test_plans/cvl_fdir_test_plan.rst | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/test_plans/cvl_fdir_test_plan.rst
> b/test_plans/cvl_fdir_test_plan.rst
> index 12e5041..254bb53 100644
> --- a/test_plans/cvl_fdir_test_plan.rst
> +++ b/test_plans/cvl_fdir_test_plan.rst
> @@ -2463,6 +2463,16 @@ Subcase 1: port stop/port start/port reset
> 
>  8. verify matched packet can be still redirected to queue 1 with FDIR
> matched ID=0x0.
> 
> +9. add a new rule::
> +
> +    flow create 0 ingress pattern eth dst is 00:11:22:33:44:55 / ipv4 src is
> 192.168.0.22 dst is 192.168.0.23 / end actions queue index 2 / mark id 1 / end
> +
> +10. list the rule and send matched packet::
> +
> +
> sendp([Ether(dst="00:11:22:33:44:55")/IP(src="192.168.0.22",dst="192.168.0.
> 23") / Raw('x' * 80)],iface="enp175s0f0")
> +
> +   check the packet are redirected to queue 2 with FDIR matched ID=0x1
> +
>  Subcase 2: add/delete rules
>  ---------------------------
> 
> @@ -2579,6 +2589,9 @@ Subcase 3: delete rules
> 
>  Subcase 4: max rules
>  --------------------
> +This case is designed based on 2*100G NIC.
> +If 4*25 NIC, each PF port has 512 fdir rules guaranteed.
> +So there can be created 14848 fdir rules on 1 PF port.
> 
>  1. create 15360 rules on port 0::
> 
> --
> 1.8.3.1