[dts] [PATCH V1 07/14] test_plans/l2tp_esp_coverage: fix build warnings and errors
Haiyang Zhao
haiyangx.zhao at intel.com
Tue Jun 23 04:21:34 CEST 2020
Signed-off-by: Haiyang Zhao <haiyangx.zhao at intel.com>
---
test_plans/l2tp_esp_coverage_test_plan.rst | 70 +++++++++++++++---------------
1 file changed, 35 insertions(+), 35 deletions(-)
diff --git a/test_plans/l2tp_esp_coverage_test_plan.rst b/test_plans/l2tp_esp_coverage_test_plan.rst
index 2e04c0e..4998f0f 100644
--- a/test_plans/l2tp_esp_coverage_test_plan.rst
+++ b/test_plans/l2tp_esp_coverage_test_plan.rst
@@ -236,7 +236,7 @@ Test Case 2: test MAC_IPV4_ESP HW checksum offload
Test Case 3: test MAC_IPV4_AH HW checksum offload
=================================================
-1. DUT enable rx checksum with "--enable-rx-cksum" when start testpmd, setup csum forwarding mode::
+1. DUT enable rx checksum with "--enable-rx-cksum" when start testpmd, setup csum forwarding mode:
2. DUT setup csum forwarding mode::
@@ -309,7 +309,7 @@ Test Case 3: test MAC_IPV4_AH HW checksum offload
Test Case 4: test MAC_IPV4_NAT-T-ESP HW checksum offload
========================================================
-1. DUT enable rx checksum with "--enable-rx-cksum" when start testpmd, setup csum forwarding mode::
+1. DUT enable rx checksum with "--enable-rx-cksum" when start testpmd, setup csum forwarding mode:
2. DUT setup csum forwarding mode::
@@ -414,34 +414,34 @@ Test Case 4: test MAC_IPV4_NAT-T-ESP HW checksum offload
10. DUT check the packets are correctly received by DUT and report the checksum error::
- testpmd> port 0/queue 0: received 1 packets
- src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x0800 - length=530 - nb_segs=1 - RSS hash=0x0 - RSS queue=0x0 - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
- ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_BAD PKT_RX_IP_CKSUM_BAD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
- -----------------
- port=0, mbuf=0x22848a0ac0, pkt_len=530, nb_segs=1:
- rx: l2_len=14 ethertype=800 l3_len=20 l4_proto=17 l4_len=8 flags=PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_BAD PKT_RX_IP_CKSUM_BAD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
- tx: m->l2_len=14 m->l3_len=20 m->l4_len=8
- tx: flags=PKT_TX_IP_CKSUM PKT_TX_L4_NO_CKSUM PKT_TX_IPV4
- stop
- Telling cores to stop...
- Waiting for lcores to finish...
-
- ---------------------- Forward statistics for port 0 ----------------------
- RX-packets: 1 RX-dropped: 0 RX-total: 1
- Bad-ipcsum: 1 Bad-l4csum: 1 Bad-outer-l4csum: 0
- TX-packets: 1 TX-dropped: 0 TX-total: 1
- ----------------------------------------------------------------------------
-
- +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
- RX-packets: 1 RX-dropped: 0 RX-total: 1
- TX-packets: 1 TX-dropped: 0 TX-total: 1
- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ testpmd> port 0/queue 0: received 1 packets
+ src=00:00:00:00:00:00 - dst=00:11:22:33:44:55 - type=0x0800 - length=530 - nb_segs=1 - RSS hash=0x0 - RSS queue=0x0 - sw ptype: L2_ETHER L3_IPV4 L4_UDP - l2_len=14 - l3_len=20 - l4_len=8 - Receive queue=0x0
+ ol_flags: PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_BAD PKT_RX_IP_CKSUM_BAD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
+ -----------------
+ port=0, mbuf=0x22848a0ac0, pkt_len=530, nb_segs=1:
+ rx: l2_len=14 ethertype=800 l3_len=20 l4_proto=17 l4_len=8 flags=PKT_RX_RSS_HASH PKT_RX_L4_CKSUM_BAD PKT_RX_IP_CKSUM_BAD PKT_RX_OUTER_L4_CKSUM_UNKNOWN
+ tx: m->l2_len=14 m->l3_len=20 m->l4_len=8
+ tx: flags=PKT_TX_IP_CKSUM PKT_TX_L4_NO_CKSUM PKT_TX_IPV4
+ stop
+ Telling cores to stop...
+ Waiting for lcores to finish...
+
+ ---------------------- Forward statistics for port 0 ----------------------
+ RX-packets: 1 RX-dropped: 0 RX-total: 1
+ Bad-ipcsum: 1 Bad-l4csum: 1 Bad-outer-l4csum: 0
+ TX-packets: 1 TX-dropped: 0 TX-total: 1
+ ----------------------------------------------------------------------------
+
+ +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
+ RX-packets: 1 RX-dropped: 0 RX-total: 1
+ TX-packets: 1 TX-dropped: 0 TX-total: 1
+ ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Test Case 5: test MAC_IPV6_NAT-T-ESP HW checksum offload
========================================================
-1. DUT enable rx checksum with "--enable-rx-cksum" when start testpmd, setup csum forwarding mode::
+1. DUT enable rx checksum with "--enable-rx-cksum" when start testpmd, setup csum forwarding mode:
2. DUT setup csum forwarding mode::
@@ -713,7 +713,7 @@ subcase 1: vlan stripping
sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=2)/IP(proto=50)/ESP(spi=1)/Raw('x'*480)], iface="enp134s0f0")
-6. DUT check the pkt is not recieved::
+6. DUT check the pkt is not recieved:
7. DUT disable the vlan header stripping with vlan tag identifier 1::
@@ -781,7 +781,7 @@ subcase 1: vlan stripping
sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=2)/IPv6(nh=50)/ESP(spi=1)/Raw('x'*480)], iface="enp134s0f0")
-6. DUT check the pkt is not recieved::
+6. DUT check the pkt is not recieved:
7. DUT disable the vlan header stripping with vlan tag identifier 1::
@@ -848,7 +848,7 @@ subcase 1: vlan stripping
sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=2)/IP(proto=51)/AH(spi=1)/Raw('x'*480)], iface="enp134s0f0")
-6. DUT check the pkt is not recieved::
+6. DUT check the pkt is not recieved:
7. DUT disable the vlan header stripping with vlan tag identifier 1::
@@ -917,7 +917,7 @@ subcase 1: vlan stripping
sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=2)/IPv6(nh=51)/AH(spi=1)/Raw('x'*480)], iface="enp134s0f0")
-6. DUT check the pkt is not recieved::
+6. DUT check the pkt is not recieved:
7. DUT disable the vlan header stripping with vlan tag identifier 1::
@@ -985,7 +985,7 @@ subcase 1: vlan stripping
sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=2)/IP()/UDP(dport=4500)/ESP(spi=1)/Raw('x'*480)], iface="enp134s0f0")
-6. DUT check the pkt is not recieved::
+6. DUT check the pkt is not recieved:
7. DUT disable the vlan header stripping with vlan tag identifier 1::
@@ -1053,7 +1053,7 @@ subcase 1: vlan stripping
sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=2)/IPv6()/UDP(dport=4500)/ESP(spi=1)/Raw('x'*480)], iface="enp134s0f0")
-6. DUT check the pkt is not recieved::
+6. DUT check the pkt is not recieved:
7. DUT disable the vlan header stripping with vlan tag identifier 1::
@@ -1169,7 +1169,7 @@ The pre-steps are as l2tp_esp_iavf_test_plan.
10. Tester send matched packets with VLAN tag "1" and incorrect checksum::
- sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=1)/IP(proto=115,chksum=0x123)/L2TP('\x00\x00\x00\x01')/Raw('x'*480)], iface="enp134s0f0")
+ sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=1)/IP(proto=115,chksum=0x123)/L2TP('\x00\x00\x00\x01')/Raw('x'*480)], iface="enp134s0f0")
11.DUT check the packets are not distributed to expected queue without mark id and and without VLAN tag "1", and report the checksum error::
@@ -1261,7 +1261,7 @@ Test Case 15: MAC_IPV4_L2TPv3 vlan insert on + SW checksum offload check
10. Tester send matched packets with incorrect checksum::
- sendp([Ether(dst="00:11:22:33:44:55")/IP(proto=115,chksum=0x123)/L2TP('\x00\x00\x00\x02')/Raw('x'*480)], iface="enp134s0f0")
+ sendp([Ether(dst="00:11:22:33:44:55")/IP(proto=115,chksum=0x123)/L2TP('\x00\x00\x00\x02')/Raw('x'*480)], iface="enp134s0f0")
11.DUT check the packets are not distributed to expected queue without mark id and report the checksum error::
@@ -1352,7 +1352,7 @@ The pre-steps are as l2tp_esp_iavf_test_plan.
10. Tester send matched packets with VLAN tag "1" and incorrect checksum::
- sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=1)/IP(proto=50,chksum=0x123)/ESP(spi=1)/Raw('x'*480)], iface="enp134s0f0")
+ sendp([Ether(dst="00:11:22:33:44:55")/Dot1Q(vlan=1)/IP(proto=50,chksum=0x123)/ESP(spi=1)/Raw('x'*480)], iface="enp134s0f0")
11.DUT check the packets are not distributed to expected queue without mark id and and fwd without VLAN tag "1", and report the checksum error::
@@ -1444,7 +1444,7 @@ Test Case 17: MAC_IPV6_NAT-T-ESP vlan insert on + SW checksum offload check
10. Tester send matched packets with incorrect checksum::
- sendp([Ether(dst="00:11:22:33:44:55")/IP(chksum=0x123)/UDP(dport=4500)/ESP(spi=1)/Raw('x'*480)], iface="enp134s0f0")
+ sendp([Ether(dst="00:11:22:33:44:55")/IP(chksum=0x123)/UDP(dport=4500)/ESP(spi=1)/Raw('x'*480)], iface="enp134s0f0")
11.DUT check the packets are not distributed to expected queue without mark id and report the checksum error::
--
1.8.3.1
More information about the dts
mailing list