[dts] [PATCH] framework/settings: Add broadcom nics to dts

[Owen Hilyard]

Hello Lijuan,

I just wanted to follow up and ask about the status of this patch. I would
like to minimize the time the community lab is running patches that are not
in mainline DTS.

Owen

On Wed, Jul 14, 2021 at 12:22 PM <ohilyard at iol.unh.edu> wrote:

> From: Owen Hilyard <ohilyard at iol.unh.edu>
>
> brcm_57414 and brcm_P2100G are not currently in the settings files for
> DTS. This causes errors when DTS is run with these nics. The community
> lab was running a patched version of DTS, but we are making an effort to
> more closely align to upstream. Since these nics are used in CI for
> DPDK, they are well tested with DTS and shouldn't cause any issues.
>
> Signed-off-by: Owen Hilyard <ohilyard at iol.unh.edu>
> ---
>  conf/nic_single_core_perf.cfg | 8 +++++++-
>  framework/settings.py         | 8 ++++++--
>  2 files changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/conf/nic_single_core_perf.cfg b/conf/nic_single_core_perf.cfg
> index 7970995e..4a1073f5 100644
> --- a/conf/nic_single_core_perf.cfg
> +++ b/conf/nic_single_core_perf.cfg
> @@ -72,4 +72,10 @@ expected_throughput = {
>                               '1C/2T': {64: {128: 0.00, 256: 0.00, 512:
> 0.00, 2048: 0.00}}}},
>      'ConnectX5_MT4121': {
>          '1C/1T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}},
> -        '1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}}}
> +        '1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}},
> +    'brcm_57414': {
> +            '1C/1T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}},
> +            '1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}},
> +    'brcm_P2100G': {
> +            '1C/1T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}},
> +            '1C/2T': {64: {128: 0.00, 256: 0.00, 512: 0.00, 2048: 0.00}}}}
> \ No newline at end of file
> diff --git a/framework/settings.py b/framework/settings.py
> index 9ceffe2e..fe7c01b5 100644
> --- a/framework/settings.py
> +++ b/framework/settings.py
> @@ -110,7 +110,9 @@ NICS = {
>      'fastlinq_ql41000_vf': '1077:8090',
>      'carlsville': '8086:15ff',
>      'hi1822': '19e5:1822',
> -    'foxville': '8086:15f2'
> +    'foxville': '8086:15f2',
> +    'brcm_57414': '14e4:16d7',
> +    'brcm_P2100G': '14e4:1750'
>  }
>
>  DRIVERS = {
> @@ -174,7 +176,9 @@ DRIVERS = {
>      'fastlinq_ql41000_vf': 'qede',
>      'carlsville': 'i40e',
>      'hi1822': 'hinic',
> -    'foxville':'igc'
> +    'foxville':'igc',
> +    'brcm_57414': 'bnxt_en',
> +    'brcm_P2100G': 'bnxt_en'
>  }
>
>  """
> --
> 2.30.2
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mails.dpdk.org/archives/dts/attachments/20210722/e9f2b083/attachment.htm>