[dts] [PATCH V1] fortville_rss_granularity_config_test_plan: remove test plan of test_dual_vlan
Yan Xia
yanx.xia at intel.com
Tue Jul 27 19:02:28 CEST 2021
remove test plan of test_dual_vlan because of moving it to test_plan_generic_flow_api
Signed-off-by: Yan Xia <yanx.xia at intel.com>
---
...ville_rss_granularity_config_test_plan.rst | 62 -------------------
1 file changed, 62 deletions(-)
diff --git a/test_plans/fortville_rss_granularity_config_test_plan.rst b/test_plans/fortville_rss_granularity_config_test_plan.rst
index c77f7e8a..18592b1e 100644
--- a/test_plans/fortville_rss_granularity_config_test_plan.rst
+++ b/test_plans/fortville_rss_granularity_config_test_plan.rst
@@ -247,68 +247,6 @@ and using scapy to send packets with ipv6-udp on tester::
and the test result should be same as Test Case 2.
-Test Case 5: test dual vlan(QinQ)
-=================================
-
-1. config testpmd on DUT
-
- 1. set up testpmd with Fortville NICs::
-
- ./testpmd -c 0x1ffff -n 4 -- -i --coremask=0x1fffe --portmask=0x1 --rxq=16 --txq=16 --tx-offloads=0x8fff
-
- 2. set qinq on::
-
- testpmd> vlan set qinq on <port_id>
-
- 3. Reta Configuration(optional, if not set, will use default)::
-
- testpmd> port config 0 rss reta (hash_index,queue_id)
-
- 4. PMD fwd only receive the packets::
-
- testpmd> set fwd rxonly
-
- 5. verbose configuration::
-
- testpmd> set verbose 8
-
- 6. start packet receive::
-
- testpmd> start
-
- 7. rss received package type configuration::
-
- testpmd> port config all rss ether
-
-2. using scapy to send packets with dual vlan (QinQ) on tester::
-
-
- sendp([Ether(dst="00:00:00:00:01:00")/Dot1Q(id=0x8100,vlan=1)/Dot1Q(id=0x8100,vlan=2)], iface=tester_itf)
-
- then got hash value and queue value that output from the testpmd on DUT.
-
-3. set hash input set to "none" by testpmd on dut::
-
-
- testpmd> set_hash_input_set 0 l2_payload none select
-
- send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the value should be
- same with the values in step 2.
-
-4. set hash input set by testpmd on dut, enable ovlan field::
-
-
- testpmd> set_hash_input_set 0 l2_payload ovlan add
-
- send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the value should be
- different with the values in step 2.
-
-5. set hash input set by testpmd on dut, enable ovlan, ivlan field::
-
- testpmd> set_hash_input_set 0 l2_payload ivlan add
-
- send packet as step 2, got hash value and queue value that output from the testpmd on DUT, the value should be
- different with the values in step 2 & step 4.
Test Case 6: 32-bit GRE keys and 24-bit GRE keys test
=====================================================
--
2.17.1
More information about the dts
mailing list