[dts] [PATCH V2 1/2] test_plans/vf_daemon: delete test_mac_antispoof

[Lin, Xueqin]

> -----Original Message-----
> From: dts <dts-bounces at dpdk.org> On Behalf Of Yan Xia
> Sent: Tuesday, October 26, 2021 9:28 PM
> To: dts at dpdk.org
> Cc: Xia, YanX <yanx.xia at intel.com>
> Subject: [dts] [PATCH V2 1/2] test_plans/vf_daemon: delete
> test_mac_antispoof
> 
> comfirm with Tu,Lijuan and Lin,Xueqin, delete the case
> 
> Signed-off-by: Yan Xia <yanx.xia at intel.com>
Acked-by: Xueqin Lin <Xueqin.lin at intel.com>
> ---
>  test_plans/vf_daemon_test_plan.rst | 39 ------------------------------
>  1 file changed, 39 deletions(-)
> 
> diff --git a/test_plans/vf_daemon_test_plan.rst
> b/test_plans/vf_daemon_test_plan.rst
> index 2c131f58..07543c9d 100644
> --- a/test_plans/vf_daemon_test_plan.rst
> +++ b/test_plans/vf_daemon_test_plan.rst
> @@ -182,45 +182,6 @@ Test Case 3: Set VLAN antispoof for VF from PF
>      packet with matching vlan id
> 
> 
> -Test Case 4: Set mac antispoof for VF from PF -
> ===============================================
> -1. Add fake mac and use fake mac instead of transmitted mac in the
> -   macswap mode, so default is non-matching SA::
> -
> -      .addr_bytes = {0x00, 0x11, 0x22, 0x33, 0x44, 0x55}
> -
> -      On VF0, add below two line code in file app/test-pmd/macswap_sse.h:
> -      struct rte_ether_addr fake_mac = {.addr_bytes = {0x00, 0x11, 0x22, 0x33,
> 0x44, 0x55},};
> -      rte_ether_addr_copy(&fake_mac, &eth_hdr[0]->s_addr);
> -
> -2. Disable VF0 mac antispoof from PF::
> -
> -      testpmd> set vf mac antispoof 0 0 off
> -
> -3. Start testpmd on VF0, set it in macswap forwarding mode and enable
> -   verbose output::
> -
> -      testpmd> set fwd macswap
> -
> -4. Send packet from tester to VF0 with correct SA, but code has changed
> -   to use fake SA
> -
> -5. Stop VF0 testpmd and check VF0 can receive then transmit packet
> -
> -6. Enable VF0 mac antispoof from PF::
> -
> -      testpmd> set vf mac antispoof 0 0 on
> -
> -7. Start VF0 testpmd
> -
> -8. Send packet from tester to VF0 with correct SA, but code has changed
> -   to use fake SA
> -
> -9. Stop VF0 testpmd and check VF0 can receive packet but can't transmit
> packet
> -
> -10. Recover original code
> -
> -
>  Test Case 5: Set the MAC address for VF from PF
> ===============================================
> 
> --
> 2.33.1