[dts][PATCH V1 5/6] test_plans/dpdk_gso_lib_test_plan: modify dpdk code by dpdk change
Wei Ling
weix.ling at intel.com
Fri Jun 24 07:32:04 CEST 2022
According to the dpdk commit 1945c64674(app/testpmd: perform SW IP
checksum for GRO/GSO packets) and commit 8ba1723783(net/vhost:
perform SW checksum in Tx path), no need to modify DPDK code to test.
Signed-off-by: Wei Ling <weix.ling at intel.com>
---
test_plans/dpdk_gso_lib_test_plan.rst | 69 +++++++++------------------
1 file changed, 22 insertions(+), 47 deletions(-)
diff --git a/test_plans/dpdk_gso_lib_test_plan.rst b/test_plans/dpdk_gso_lib_test_plan.rst
index ee37cdde..727de1f7 100644
--- a/test_plans/dpdk_gso_lib_test_plan.rst
+++ b/test_plans/dpdk_gso_lib_test_plan.rst
@@ -32,29 +32,10 @@ This test plan includes dpdk gso lib test with TCP/UDP/VxLAN/GRE traffic.
Prerequisites
=============
-Modify the testpmd code as following::
-
- --- a/app/test-pmd/csumonly.c
- +++ b/app/test-pmd/csumonly.c
- @@ -693,10 +693,12 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
- Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â * and inner headers */
- Â
- Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
- +#if 0
- Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ether_addr_copy(&peer_eth_addrs[fs->peer_addr],
- Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ð_hdr->d_addr);
- Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ether_addr_copy(&ports[fs->tx_port].eth_addr,
- Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â ð_hdr->s_addr);
- +#endif
- Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â parse_ethernet(eth_hdr, &info);
- Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â l3_hdr = (char *)eth_hdr + info.l2_len;
-
Test flow
=========
-::
-
- NIC2(In kernel) <- NIC1(DPDK) <- testpmd(csum fwd) <- Vhost <- Virtio-net
+NIC2(In kernel) <- NIC1(DPDK) <- testpmd(csum fwd) <- Vhost <- Virtio-net
Test Case1: DPDK GSO test with tcp traffic
==========================================
@@ -84,17 +65,15 @@ Test Case1: DPDK GSO test with tcp traffic
3. Set up vm with virto device and using kernel virtio-net driver:
- ::
-
taskset -c 13 \
qemu-system-x86_64 -name us-vhost-vm1 \
- -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem \
- -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
- -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,id=char0,path=./vhost-net \
- -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
- -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on,rx_queue_size=1024,tx_queue_size=1024 -vnc :10 -daemonize
+ -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+ -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on,rx_queue_size=1024,tx_queue_size=1024 -vnc :10 -daemonize
4. In vm, config the virtio-net device with ip::
@@ -146,17 +125,15 @@ Test Case3: DPDK GSO test with vxlan traffic
3. Set up vm with virto device and using kernel virtio-net driver:
- ::
-
taskset -c 13 \
qemu-system-x86_64 -name us-vhost-vm1 \
- -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem \
- -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
- -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,id=char0,path=./vhost-net \
- -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
- -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on,rx_queue_size=1024,tx_queue_size=1024 -vnc :10 -daemonize
+ -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+ -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on,rx_queue_size=1024,tx_queue_size=1024 -vnc :10 -daemonize
4. In vm, config the virtio-net device with ip::
@@ -200,17 +177,15 @@ Test Case4: DPDK GSO test with gre traffic
3. Set up vm with virto device and using kernel virtio-net driver:
- ::
-
taskset -c 13 \
qemu-system-x86_64 -name us-vhost-vm1 \
- -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
- -numa node,memdev=mem \
- -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
- -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
- -chardev socket,id=char0,path=./vhost-net \
- -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
- -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on,rx_queue_size=1024,tx_queue_size=1024 -vnc :10 -daemonize
+ -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on \
+ -numa node,memdev=mem \
+ -mem-prealloc -monitor unix:/tmp/vm2_monitor.sock,server,nowait -net nic,macaddr=00:00:00:08:e8:aa,addr=1f -net user,hostfwd=tcp:127.0.0.1:6001-:22 \
+ -smp cores=1,sockets=1 -drive file=/home/osimg/ubuntu16.img \
+ -chardev socket,id=char0,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce \
+ -device virtio-net-pci,mac=52:54:00:00:00:01,netdev=mynet1,mrg_rxbuf=on,csum=on,gso=on,host_tso4=on,guest_tso4=on,rx_queue_size=1024,tx_queue_size=1024 -vnc :10 -daemonize
4. In vm, config the virtio-net device with ip::
--
2.25.1
More information about the dts
mailing list