[dts][PATCH V1 3/7] test_plans/loopback_virtio_user_server_mode_dsa_test_plan: add loopback_virtio_user_server_mode_dsa testplan
Wei Ling
weix.ling at intel.com
Sat May 7 11:59:07 CEST 2022
Add loopback_virtio_user_server_mode_dsa_test_plan.rst into test_plans.
Signed-off-by: Wei Ling <weix.ling at intel.com>
---
..._virtio_user_server_mode_dsa_test_plan.rst | 820 ++++++++++++++++++
1 file changed, 820 insertions(+)
create mode 100644 test_plans/loopback_virtio_user_server_mode_dsa_test_plan.rst
diff --git a/test_plans/loopback_virtio_user_server_mode_dsa_test_plan.rst b/test_plans/loopback_virtio_user_server_mode_dsa_test_plan.rst
new file mode 100644
index 00000000..ad06a2a7
--- /dev/null
+++ b/test_plans/loopback_virtio_user_server_mode_dsa_test_plan.rst
@@ -0,0 +1,820 @@
+.. Copyright (c) <2022>, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+
+ - Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ OF THE POSSIBILITY OF SUCH DAMAGE.
+
+=======================================================================
+Loopback vhost-user/virtio-user server mode with DSA driver test plan
+=======================================================================
+
+Description
+===========
+
+Vhost asynchronous data path leverages DMA devices to offload memory copies from the CPU and it is implemented in an asynchronous way.
+In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA
+channels and one DMA channel can be shared by multiple vrings at the same time. Vhost enqueue operation with CBDMA channels is supported
+in both split and packed ring.
+
+This document provides the test plan for testing the following features when Vhost-user using asynchronous data path with
+DSA driver (kernel IDXD driver and DPDK vfio-pci driver) in loopback virtio-user topology.
+1. Virtio-user server mode is a feature to enable virtio-user as the server, vhost as the client, thus after vhost-user is killed then relaunched,
+virtio-user can reconnect back to vhost-user again; at another hand, virtio-user also can reconnect back to vhost-user after virtio-user is killed.
+This feature test need cover different rx/tx paths with virtio 1.0 and virtio 1.1, includes split ring mergeable, non-mergeable, inorder mergeable,
+inorder non-mergeable, vector_rx path and packed ring mergeable, non-mergeable, inorder non-mergeable, inorder mergeable, vectorized path.
+2. Check payload valid after packets forwarding many times.
+3. Stress test with large chain packets.
+
+IOMMU impact:
+If iommu off, idxd can work with iova=pa
+If iommu on, kernel dsa driver only can work with iova=va by program IOMMU, can't use iova=pa(fwd not work due to pkts payload wrong).
+
+Note:
+1. When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may
+exceed IOMMU's max capability, better to use 1G guest hugepage.
+2. DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd, and the suite has not yet been automated.
+
+Topology
+--------
+ Test flow: Vhost-user <-> Virtio-user
+
+General set up
+--------------
+1. Compile DPDK::
+
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=<dpdk build dir>
+ # ninja -C <dpdk build dir> -j 110
+
+2. Get the PCI device ID and DSA device ID of DUT, for example, 0000:4f:00.1 is PCI device ID, 0000:6a:01.0 - 0000:f6:01.0 are DSA device IDs::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -s
+
+ Network devices using kernel driver
+ ===================================
+ 0000:4f:00.1 'Ethernet Controller E810-C for QSFP 1592' drv=ice unused=vfio-pci
+
+ DMA devices using kernel driver
+ ===============================
+ 0000:6a:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:6f:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:74:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:79:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:e7:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:ec:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:f1:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+ 0000:f6:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+
+Test case
+=========
+
+Common steps
+------------
+1. Bind DSA devices to DPDK vfio-pci driver::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port DSA device id>
+
+ For example, bind 2 DMA devices to vfio-pci driver:
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0
+
+.. note::
+
+ One DPDK DSA device can create 8 WQ at most. Below is an example, where DPDK DSA device will create one and
+ eight WQ for DSA deivce 0000:e7:01.0 and 0000:ec:01.0. The value of “max_queues†is 1~8:
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:e7:01.0,max_queues=1 -- -i
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:ec:01.0,max_queues=8 -- -i
+
+2. Bind DSA devices to kernel idxd driver, and configure Work Queue (WQ)::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd <numDevices * 2>
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q <numWq>
+
+.. note::
+
+ Better to reset WQ when need operate DSA devices that bound to idxd drvier:
+ <dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset <numDevices * 2>
+ You can check it by 'ls /dev/dsa'
+ numDevices: number of devices, where 0<=numDevices<=7, corresponding to 0000:6a:01.0 - 0000:f6:01.0
+ numWq: Number of workqueues per DSA endpoint, where 1<=numWq<=8
+
+ For example, bind 2 DMA devices to idxd driver and configure WQ:
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2
+ Check WQ by 'ls /dev/dsa' and can find "wq0.0 wq2.0 wq2.1 wq2.2 wq2.3"
+
+Test Case 1: loopback split ring server mode large chain packets stress test with dsa dpdk driver
+---------------------------------------------------------------------------------------------------
+This is a stress test case about forwading large chain packets in loopback vhost-user/virtio-user split ring with server mode
+when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test.
+
+1. Bind 1 dsa device to vfio-pci like common step 1::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci f6:01.0
+
+2. Launch vhost::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:f6:01.0,max_queues=1 \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],client=1' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --mbuf-size=45535 --lcore-dma=[lcore3 at 0000:f6:01.0-q0]
+
+3. launch virtio and start testpmd::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=testpmd0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=1,mrg_rxbuf=1,in_order=0,vectorized=1,queue_size=2048,server=1 \
+ -- -i --rxq=1 --txq=1 --txd=2048 --rxd=2048 --nb-cores=1
+ testpmd>start
+
+4. Send large pkts from vhost and check the stats::
+
+ testpmd>set txpkts 45535,45535,45535,45535,45535
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+5. Stop and quit vhost testpmd and relaunch vhost with pa mode by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost -a 0000:f6:01.0,max_queues=4 \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],client=1' \
+ --iova=pa -- -i --nb-cores=1 --txd=1024 --rxd=1024 --mbuf-size=45535 --lcore-dma=[lcore3 at 0000:f6:01.0-q0]
+
+6. rerun step 4.
+
+Test Case 2: loopback packed ring server mode large chain packets stress test with dsa dpdk driver
+----------------------------------------------------------------------------------------------------
+This is a stress test case about forwading large chain packets in loopback vhost-user/virtio-user packed ring with server mode
+when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test.
+
+1. Bind 1 dsa port to vfio-pci as common step 1::
+
+ <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci f6:01.0
+
+2. Launch vhost::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-3 -n 4 -a 0000:6f:01.0,max_queues=1 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],client=1' \
+ --iova=va -- -i --nb-cores=1 --mbuf-size=45535 --lcore-dma=[lcore3 at 0000:6f:01.0-q0]
+
+3. launch virtio and start testpmd::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=testpmd0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=1,mrg_rxbuf=1,in_order=0,vectorized=1,packed_vq=1,queue_size=2048,server=1 \
+ -- -i --rxq=1 --txq=1 --txd=2048 --rxd=2048 --nb-cores=1
+ testpmd>start
+
+4. Send large pkts from vhost and check the stats::
+
+ testpmd>set txpkts 45535,45535,45535,45535,45535
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+5. Stop and quit vhost testpmd and relaunch vhost with pa mode by below command::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-3 -n 4 -a 0000:6f:01.0,max_queues=1 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],client=1' \
+ --iova=va -- -i --nb-cores=1 --mbuf-size=45535 --lcore-dma=[lcore3 at 0000:6f:01.0-q0]
+
+6. rerun step 3.
+
+Test Case 3: loopback split ring all path server mode and multi-queues payload check with dsa dpdk driver
+-----------------------------------------------------------------------------------------------------------
+This case tests the payload is valid after forwading large chain packets in loopback vhost-user/virtio-user split ring
+all path multi-queues with server mode when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test.
+
+1. bind 3 dsa port to vfio-pci like common step 1::
+
+ ls /dev/dsa #check wq configure, reset if exist
+ ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0
+ ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0
+
+2. Launch vhost::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:6a:01.0,max_queues=4 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --rxq=8 --txq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11 at 0000:6a:01.0-q0,lcore12 at 0000:6a:01.0-q0,lcore13 at 0000:6a:01.0-q1,lcore13 at 0000:6a:01.0-q2,lcore14 at 0000:6a:01.0-q1,lcore14 at 0000:6a:01.0-q2,lcore15 at 0000:6a:01.0-q1,lcore15 at 0000:6a:01.0-q2]
+
+3. Launch virtio-user with split ring mergeable inorder path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+4. Attach pdump secondary process to primary process by same file-prefix::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio-user0 -- \
+ --pdump 'device_id=net_virtio_user0,queue=0,rx-dev=./pdump-virtio-rx-0.pcap,mbuf-size=8000' \
+ --pdump 'device_id=net_virtio_user0,queue=3,rx-dev=./pdump-virtio-rx-3.pcap,mbuf-size=8000'
+
+5. Send large pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd> set fwd csum
+ testpmd> set txpkts 64,64,64,2000,2000,2000
+ testpmd> set burst 1
+ testpmd> start tx_first 1
+ testpmd> show port stats all
+ testpmd> stop
+
+6. Quit pdump, check all the packets length are 6192 Byte in the pcap file and the payload in receive packets are same.
+
+7. Quit and relaunch vhost and rerun step 4-6.
+
+8. Quit and relaunch virtio with split ring mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+9. Rerun steps 4-7.
+
+10. Quit and relaunch virtio with split ring non-mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=0,server=1 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+11. Rerun step 4.
+
+12. Send pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd> set fwd csum
+ testpmd> set txpkts 64,128,256,512
+ testpmd> set burst 1
+ testpmd> start tx_first 1
+ testpmd> show port stats all
+ testpmd> stop
+
+13. Quit pdump, check all the packets length are 960 Byte in the pcap file and the payload in receive packets are same.
+
+14. Quit and relaunch vhost and rerun step 11-13.
+
+15. Quit and relaunch virtio with split ring inorder non-mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+16. Rerun step 11-14.
+
+17. Quit and relaunch virtio with split ring vectorized path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 30,31 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=0,vectorized=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+18. Rerun step 11-14.
+
+19. Quit and relaunch vhost with diff channel::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --rxq=8 --txq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11 at 0000:6a:01.0-q0,lcore12 at 0000:6a:01.0-q0,lcore13 at 0000:6f:01.0-q1,lcore13 at 0000:74:01.0-q2,lcore14 at 0000:6f:01.0-q1,lcore14 at 0000:74:01.0-q2,lcore15 at 0000:6f:01.0-q1,lcore15 at 0000:74:01.0-q2]
+
+20. Rerun steps 11-14.
+
+21. Quit and relaunch vhost w/ iova=pa::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:6a:01.0 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=pa -- -i --nb-cores=5 --rxq=8 --txq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11 at 0000:6a:01.0-q0,lcore12 at 0000:6a:01.0-q0,lcore13 at 0000:6a:01.0-q1,lcore13 at 0000:6a:01.0-q2,lcore14 at 0000:6a:01.0-q1,lcore14 at 0000:6a:01.0-q2,lcore15 at 0000:6a:01.0-q1,lcore15 at 0000:6a:01.0-q2]
+
+22. Rerun steps 11-14.
+
+Test Case 4: loopback packed ring all path server mode and multi-queues payload check with dsa dpdk driver
+------------------------------------------------------------------------------------------------------------
+This case tests the payload is valid after forwading large chain packets in loopback vhost-user/virtio-user packed ring
+all path multi-queues with server mode when vhost uses the asynchronous enqueue operations with dsa dpdk driver. Both iova as VA and PA mode test.
+
+1. bind 8 dsa port to vfio-pci like common step 1::
+
+ ls /dev/dsa #check wq configure, reset if exist
+ ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+
+2. Launch vhost::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:6a:01.0 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --rxq=8 --txq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11 at 0000:6a:01.0-q0,lcore11 at 0000:6a:01.0-q7,lcore12 at 0000:6a:01.0-q1,lcore12 at 0000:6a:01.0-q2,lcore12 at 0000:6a:01.0-q3,lcore13 at 0000:6a:01.0-q2,lcore13 at 0000:6a:01.0-q3,lcore13 at 0000:6a:01.0-q4,lcore14 at 0000:6a:01.0-q2,lcore14 at 0000:6a:01.0-q3,lcore14 at 0000:6a:01.0-q4,lcore14 at 0000:6a:01.0-q5,lcore15 at 0000:6a:01.0-q0,lcore15 at 0000:6a:01.0-q1,lcore15 at 0000:6a:01.0-q2,lcore15 at 0000:6a:01.0-q3,lcore15 at 0000:6a:01.0-q4,lcore15 at 0000:6a:01.0-q5,lcore15 at 0000:6a:01.0-q6,lcore15 at 0000:6a:01.0-q7]
+
+3. Launch virtio-user with packed ring mergeable inorder path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,packed_vq=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+4. Attach pdump secondary process to primary process by same file-prefix::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio-user0 -- \
+ --pdump 'device_id=net_virtio_user0,queue=0,rx-dev=./pdump-virtio-rx-0.pcap,mbuf-size=8000' \
+ --pdump 'device_id=net_virtio_user0,queue=3,rx-dev=./pdump-virtio-rx-3.pcap,mbuf-size=8000'
+
+5. Send large pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd> set fwd csum
+ testpmd> set txpkts 64,64,64,2000,2000,2000
+ testpmd> set burst 1
+ testpmd> start tx_first 1
+ testpmd> show port stats all
+ testpmd> stop
+
+6. Quit pdump, check all the packets length are 6192 Byte in the pcap file and the payload in receive packets are same.
+
+7. Quit and relaunch vhost and rerun step 4-6.
+
+8. Quit and relaunch virtio with packed ring mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,packed_vq=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+9. Rerun steps 4-7.
+
+10. Quit and relaunch virtio with packed ring non-mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=0,packed_vq=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+11. Rerun step 4.
+
+12. Send pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd> set fwd csum
+ testpmd> set txpkts 64,128,256,512
+ testpmd> set burst 1
+ testpmd> start tx_first 1
+ testpmd> show port stats all
+ testpmd> stop
+
+13. Quit pdump, check all the packets length are 960 Byte in the pcap file and the payload in receive packets are same.
+
+14. Quit and relaunch vhost and rerun step 11-13.
+
+15. Quit and relaunch virtio with packed ring inorder non-mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=1,packed_vq=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+16. Rerun step 11-14.
+
+17. Quit and relaunch virtio with packed ring vectorized path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=1,packed_vq=1,vectorized=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+18. Rerun step 11-14.
+
+19. Quit and relaunch virtio with packed ring vectorized path and ring size is not power of 2 as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=1,packed_vq=1,vectorized=1,queue_size=1025,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1025 --rxd=1025
+ testpmd>set fwd csum
+ testpmd>start
+
+20. Rerun step 11-14.
+
+21. Quit and relaunch vhost with diff channel::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --rxq=8 --txq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11 at 0000:6a:01.0-q0,lcore11 at 0000:f6:01.0-q7,lcore12 at 0000:6f:01.0-q1,lcore12 at 0000:74:01.0-q2,lcore12 at 0000:79:01.0-q3,lcore13 at 0000:74:01.0-q2,lcore13 at 0000:79:01.0-q3,lcore13 at 0000:e7:01.0-q4,lcore14 at 0000:74:01.0-q2,lcore14 at 0000:79:01.0-q3,lcore14 at 0000:e7:01.0-q4,lcore14 at 0000:ec:01.0-q5,lcore15 at 0000:6a:01.0-q0,lcore15 at 0000:6f:01.0-q1,lcore15 at 0000:74:01.0-q2,lcore15 at 0000:79:01.0-q3,lcore15 at 0000:e7:01.0-q4,lcore15 at 0000:ec:01.0-q5,lcore15 at 0000:f1:01.0-q6,lcore15 at 0000:f6:01.0-q7]
+
+22. Rerun steps 11-14.
+
+23. Quit and relaunch vhost w/ iova=pa::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:6a:01.0 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq6;txq7]' \
+ --iova=pa -- -i --nb-cores=5 --rxq=8 --txq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11 at 0000:6a:01.0-q0,lcore11 at 0000:6a:01.0-q7,lcore12 at 0000:6a:01.0-q1,lcore12 at 0000:6a:01.0-q2,lcore12 at 0000:6a:01.0-q3,lcore13 at 0000:6a:01.0-q2,lcore13 at 0000:6a:01.0-q3,lcore13 at 0000:6a:01.0-q4,lcore14 at 0000:6a:01.0-q2,lcore14 at 0000:6a:01.0-q3,lcore14 at 0000:6a:01.0-q4,lcore14 at 0000:6a:01.0-q5,lcore15 at 0000:6a:01.0-q0,lcore15 at 0000:6a:01.0-q1,lcore15 at 0000:6a:01.0-q2,lcore15 at 0000:6a:01.0-q3,lcore15 at 0000:6a:01.0-q4,lcore15 at 0000:6a:01.0-q5,lcore15 at 0000:6a:01.0-q6,lcore15 at 0000:6a:01.0-q7]
+
+24. Rerun steps 3-6.
+
+Test Case 5: loopback split ring server mode large chain packets stress test with dsa kernel driver
+---------------------------------------------------------------------------------------------------
+This is a stress test case about forwading large chain packets in loopback vhost-user/virtio-user split ring with server mode
+when vhost uses the asynchronous enqueue operations with dsa kernel driver.
+
+1. Bind 1 dsa device to idxd like common step 2::
+
+ ls /dev/dsa #check wq configure, reset if exist
+ ./usertools/dpdk-devbind.py -u 6a:01.0
+ ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 0
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --file-prefix=vhost \
+ --vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],client=1' \
+ --iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --mbuf-size=45535 --lcore-dma=[lcore3 at wq0.2]
+
+3. launch virtio and start testpmd::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=testpmd0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=1,mrg_rxbuf=1,in_order=0,vectorized=1,queue_size=2048,server=1 \
+ -- -i --rxq=1 --txq=1 --txd=2048 --rxd=2048 --nb-cores=1
+ testpmd>start
+
+4. Send large pkts from vhost::
+
+ testpmd>set txpkts 45535,45535,45535,45535,45535
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+Test Case 6: loopback packed ring server mode large chain packets stress test with dsa kernel driver
+-----------------------------------------------------------------------------------------------------
+This is a stress test case about forwading large chain packets in loopback vhost-user/virtio-user packed ring with server mode
+when vhost uses the asynchronous enqueue operations with dsa kernel driver.
+
+1. Bind 1 dsa port to idxd like common step 2::
+
+ ls /dev/dsa #check wq configure, reset if exist
+ ./usertools/dpdk-devbind.py -u 6a:01.0
+ ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-3 -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],client=1' \
+ --iova=va -- -i --nb-cores=1 --mbuf-size=45535 --lcore-dma=[lcore3 at wq0.0]
+
+3. launch virtio and start testpmd::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=testpmd0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=1,mrg_rxbuf=1,in_order=0,vectorized=1,packed_vq=1,queue_size=2048,server=1 \
+ -- -i --rxq=1 --txq=1 --txd=2048 --rxd=2048 --nb-cores=1
+ testpmd>start
+
+4. Send large pkts from vhost and check the stats::
+
+ testpmd>set txpkts 45535,45535,45535,45535,45535
+ testpmd>start tx_first 32
+ testpmd>show port stats all
+
+Test Case 7: loopback split ring all path server mode and multi-queues payload check with dsa kernel driver
+-------------------------------------------------------------------------------------------------------------
+This case tests the payload is valid after forwading large chain packets in loopback vhost-user/virtio-user split ring
+all path multi-queues with server mode when vhost uses the asynchronous enqueue operations with dsa kernel driver.
+
+1. bind 3 dsa port to idxd like common step 2::
+
+ ls /dev/dsa #check wq configure, reset if exist
+ ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0
+ ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --rxq=8 --txq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11 at wq0.0,lcore12 at wq0.0,lcore13 at wq0.1,lcore13 at wq0.2,lcore14 at wq0.1,lcore14 at wq0.2,lcore15 at wq0.1,lcore15 at wq0.2]
+
+3. Launch virtio-user with split ring mergeable inorder path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+4. Attach pdump secondary process to primary process by same file-prefix::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio-user0 -- \
+ --pdump 'device_id=net_virtio_user0,queue=0,rx-dev=./pdump-virtio-rx-0.pcap,mbuf-size=8000' \
+ --pdump 'device_id=net_virtio_user0,queue=3,rx-dev=./pdump-virtio-rx-3.pcap,mbuf-size=8000'
+
+5. Send large pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd> set fwd csum
+ testpmd> set txpkts 64,64,64,2000,2000,2000
+ testpmd> set burst 1
+ testpmd> start tx_first 1
+ testpmd> stop
+
+6. Quit pdump, check all the packets length are 6192 Byte in the pcap file and the payload in receive packets are same.
+
+7. Quit and relaunch vhost and rerun step 4-6.
+
+8. Quit and relaunch virtio with split ring mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+9. Rerun steps 4-7.
+
+10. Quit and relaunch virtio with split ring non-mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=0,server=1 \
+ -- -i --enable-hw-vlan-strip --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+11. Rerun step 4.
+
+12. Send pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd> set fwd csum
+ testpmd> set txpkts 64,128,256,512
+ testpmd> set burst 1
+ testpmd> start tx_first 1
+ testpmd> stop
+
+13. Quit pdump, check all the packets length are 960 Byte in the pcap file and the payload in receive packets are same.
+
+14. Quit and relaunch vhost and rerun step 11-13.
+
+15. Quit and relaunch virtio with split ring inorder non-mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+16. Rerun step 11-14.
+
+17. Quit and relaunch virtio with split ring vectorized path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=0,vectorized=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+18. Rerun step 11-14.
+
+19. Quit and relaunch vhost with diff channel::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=5 --rxq=8 --txq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11 at wq0.0,lcore12 at wq0.0,lcore13 at wq2.1,lcore13 at wq4.2,lcore14 at wq2.1,lcore14 at wq4.2,lcore15 at wq2.1,lcore15 at wq4.2]
+
+20. Rerun steps 11-14.
+
+Test Case 8: loopback packed ring all path server mode and multi-queues payload check with dsa kernel driver
+-------------------------------------------------------------------------------------------------------------
+This case tests the payload is valid after forwading large chain packets in loopback vhost-user/virtio-user packed ring
+all path multi-queues with server mode when vhost uses the asynchronous enqueue operations with dsa kernel driver.
+
+1. bind 8 dsa port to idxd like common step 2::
+
+ ls /dev/dsa #check wq configure, reset if exist
+ ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --rxq=8 --txq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11 at wq0.0,lcore11 at wq0.7,lcore12 at wq0.1,lcore12 at wq0.2,lcore12 at wq0.3,lcore13 at wq0.2,lcore13 at wq0.3,lcore13 at wq0.4,lcore14 at wq0.2,lcore14 at wq0.3,lcore14 at wq0.4,lcore14 at wq0.5,lcore15 at wq0.0,lcore15 at wq0.1,lcore15 at wq0.2,lcore15 at wq0.3,lcore15 at wq0.4,lcore15 at wq0.5,lcore15 at wq0.6,lcore15 at wq0.7]
+
+3. Launch virtio-user with packed ring mergeable inorder path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,packed_vq=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+4. Attach pdump secondary process to primary process by same file-prefix::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio-user0 -- \
+ --pdump 'device_id=net_virtio_user0,queue=0,rx-dev=./pdump-virtio-rx-0.pcap,mbuf-size=8000' \
+ --pdump 'device_id=net_virtio_user0,queue=3,rx-dev=./pdump-virtio-rx-3.pcap,mbuf-size=8000'
+
+5. Send large pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd> set fwd csum
+ testpmd> set txpkts 64,64,64,2000,2000,2000
+ testpmd> set burst 1
+ testpmd> start tx_first 1
+ testpmd> stop
+
+6. Quit pdump, check all the packets length are 6192 Byte in the pcap file and the payload in receive packets are same.
+
+7. Quit and relaunch vhost and rerun step 4-6.
+
+8. Quit and relaunch virtio with packed ring mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,packed_vq=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+9. Rerun steps 4-7.
+
+10. Quit and relaunch virtio with packed ring non-mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=0,packed_vq=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+11. Rerun step 4.
+
+12. Send pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd> set fwd csum
+ testpmd> set txpkts 64,128,256,512
+ testpmd> set burst 1
+ testpmd> start tx_first 1
+ testpmd> stop
+
+13. Quit pdump, check all the packets length are 960 Byte in the pcap file and the payload in receive packets are same.
+
+14. Quit and relaunch vhost and rerun step 11-13.
+
+15. Quit and relaunch virtio with packed ring inorder non-mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=1,packed_vq=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+16. Rerun step 11-14.
+
+17. Quit and relaunch virtio with packed ring vectorized path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=1,packed_vq=1,vectorized=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+18. Rerun step 11-14.
+
+19. Quit and relaunch virtio with packed ring vectorized path and ring size is not power of 2 as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --file-prefix=virtio-user0 --no-pci --force-max-simd-bitwidth=512 \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=0,in_order=1,packed_vq=1,vectorized=1,queue_size=1025,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1025 --rxd=1025
+ testpmd>set fwd csum
+ testpmd>start
+
+20. Rerun step 11-14.
+
+21. Quit and relaunch vhost with diff channel::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 10-18 -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq6;txq7]' \
+ --iova=va -- -i --nb-cores=5 --rxq=8 --txq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore11 at wq0.0,lcore11 at wq14.7,lcore12 at wq2.1,lcore12 at wq4.2,lcore12 at wq6.3,lcore13 at wq4.2,lcore13 at wq6.3,lcore13 at wq8.4,lcore14 at wq4.2,lcore14 at wq6.3,lcore14 at wq8.4,lcore14 at wq10.5,lcore15 at wq0.0,lcore15 at wq2.1,lcore15 at wq4.2,lcore15 at wq6.3,lcore15 at wq8.4,lcore15 at wq10.5,lcore15 at wq12.6,lcore15 at wq14.7]
+
+22. Rerun steps 3-6.
+
+Test Case 9: loopback split and packed ring server mode multi-queues and mergeable path payload check with dsa dpdk and kernel driver
+--------------------------------------------------------------------------------------------------------------------------------------
+This case tests the payload is valid after forwading large chain packets in loopback vhost-user/virtio-user split and packed ring
+multi-queues with server mode when vhost uses the asynchronous enqueue operations with dsa kernel driver.
+
+1. bind 4 dsa device to idxd and 2 dsa device to vfio-pci like common step 1-2::
+
+ ls /dev/dsa #check wq configure, reset if exist
+ ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0
+ ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0
+ ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 2
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 4
+ <dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 6
+ ls /dev/dsa #check wq configure success
+
+2. Launch vhost::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-3 -n 4 --file-prefix=vhost -a 0000:e7:01.0,max_queues=4 -a 0000:ec:01.0,max_queues=4 \
+ --vdev 'eth_vhost0,iface=vhost-net0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+ --iova=va -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024 \
+ --lcore-dma=[lcore3 at wq0.0,lcore3 at wq2.0,lcore3 at wq4.0,lcore3 at wq6.0,lcore3 at 0000:e7:01.0-q0,lcore3 at 0000:e7:01.0-q2,lcore3 at 0000:ec:01.0-q3]
+
+3. Launch virtio-user with split ring mergeable inorder path::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4-5 -n 4 --file-prefix=virtio-user --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+4. Attach pdump secondary process to primary process by same file-prefix::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-pdump -v --file-prefix=virtio-user -- \
+ --pdump 'device_id=net_virtio_user0,queue=0,rx-dev=/tmp/pdump-virtio-rx-0.pcap,mbuf-size=8000'
+ --pdump 'device_id=net_virtio_user0,queue=3,rx-dev=./pdump-virtio-rx-3.pcap,mbuf-size=8000'
+
+5. Send large pkts from vhost, check loopback performance can get expected and each queue can receive packets::
+
+ testpmd>set fwd csum
+ testpmd>set txpkts 64,64,64,2000,2000,2000
+ testpmd>set burst 1
+ testpmd>start tx_first 1
+
+6. Quit pdump and chcek all the packets length is 6192 and the payload of all packets are same in the pcap file.
+
+7. Quit and relaunch vhost and rerun step 4-6.
+
+8. Quit and relaunch virtio with split ring mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4-5 -n 4 --file-prefix=virtio-user --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+9. Stop vhost and rerun step 4-7.
+
+10. Quit and relaunch virtio with packed ring mergeable inorder path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4-5 -n 4 --file-prefix=virtio-user --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=1,packed_vq=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+11. Stop vhost and rerun step 4-7.
+
+12. Quit and relaunch virtio with packed ring mergeable path as below::
+
+ <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4-5 -n 4 --file-prefix=virtio-user --no-pci \
+ --vdev=net_virtio_user0,mac=00:11:22:33:44:10,path=./vhost-net0,queues=8,mrg_rxbuf=1,in_order=0,packed_vq=1,server=1 \
+ -- -i --nb-cores=1 --rxq=8 --txq=8 --txd=1024 --rxd=1024
+ testpmd>set fwd csum
+ testpmd>start
+
+13. Stop vhost and rerun step 4-7.
\ No newline at end of file
--
2.25.1
More information about the dts
mailing list