[dts][PATCH V3 1/2] test_plans/vhost_virtio_pmd_interrupt_cbdma_test_plan: modify the dmas parameter by DPDK changed
Wei Ling
weix.ling at intel.com
Tue Nov 22 07:24:36 CET 2022
>From DPDK-22.11, the dmas parameter have changed, so modify the dmas
parameter in the testplan.
Signed-off-by: Wei Ling <weix.ling at intel.com>
---
...t_virtio_pmd_interrupt_cbdma_test_plan.rst | 190 ++++++++----------
1 file changed, 79 insertions(+), 111 deletions(-)
diff --git a/test_plans/vhost_virtio_pmd_interrupt_cbdma_test_plan.rst b/test_plans/vhost_virtio_pmd_interrupt_cbdma_test_plan.rst
index b9c0640d..7cf3b5b6 100644
--- a/test_plans/vhost_virtio_pmd_interrupt_cbdma_test_plan.rst
+++ b/test_plans/vhost_virtio_pmd_interrupt_cbdma_test_plan.rst
@@ -1,35 +1,6 @@
.. SPDX-License-Identifier: BSD-3-Clause
Copyright(c) 2022 Intel Corporation
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- - Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-
- - Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
-
- - Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
- COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- OF THE POSSIBILITY OF SUCH DAMAGE.
-
====================================================
vhost/virtio-pmd interrupt mode with cbdma test plan
====================================================
@@ -42,14 +13,14 @@ to virtio-pmd side，check virtio-pmd cores can be wakeup status，and virtio-pm
sleep status after stop sending packets from traffic generator when cbdma enable.This test plan
cover virtio 0.95, virtio 1.0 and virtio 1.1.
-..Note:
-1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > 5.1, and packed ring multi-queues not support reconnect in qemu yet.
-2.For split virtqueue virtio-net with multi-queues server mode test, better to use qemu version >= 5.2.0, dut to qemu(v4.2.0~v5.1.0) exist split ring multi-queues reconnection issue.
-3.Kernel version > 4.8.0, mostly linux distribution don't support vfio-noiommu mode by default,
-so testing this case need rebuild kernel to enable vfio-noiommu.
-4.When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may
-exceed IOMMU's max capability, better to use 1G guest hugepage.
-5.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd.
+.. note::
+
+ 1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > 5.1, and packed ring multi-queues not support reconnect in qemu yet.
+ 2.For split virtqueue virtio-net with multi-queues server mode test, better to use qemu version >= 5.2.0, dut to qemu(v4.2.0~v5.1.0) exist split ring multi-queues reconnection issue.
+ 3.Kernel version > 4.8.0, mostly linux distribution don't support vfio-noiommu mode by default,
+ so testing this case need rebuild kernel to enable vfio-noiommu.
+ 4.When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may exceed IOMMU's max capability, better to use 1G guest hugepage.
+ 5.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd.
Prerequisites
=============
@@ -59,67 +30,67 @@ Test flow:TG --> NIC --> Vhost --> Virtio--> Vhost --> NIC --> TG
Software
--------
- Trex:http://trex-tgn.cisco.com/trex/release/v2.26.tar.gz
+ Trex:http://trex-tgn.cisco.com/trex/release/v2.26.tar.gz
General set up
--------------
1. Compile DPDK::
- # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static <dpdk build dir>
- # ninja -C <dpdk build dir> -j 110
- For example:
- CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static x86_64-native-linuxapp-gcc
- ninja -C x86_64-native-linuxapp-gcc -j 110
+ # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static <dpdk build dir>
+ # ninja -C <dpdk build dir> -j 110
+ For example:
+ CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=static x86_64-native-linuxapp-gcc
+ ninja -C x86_64-native-linuxapp-gcc -j 110
2. Get the PCI device ID and DMA device ID of DUT, for example, 0000:18:00.0 is PCI device ID, 0000:00:04.0, 0000:00:04.1 is DMA device ID::
- <dpdk dir># ./usertools/dpdk-devbind.py -s
+ <dpdk dir># ./usertools/dpdk-devbind.py -s
- Network devices using kernel driver
- ===================================
- 0000:18:00.0 'Device 159b' if=ens785f0 drv=ice unused=vfio-pci
+ Network devices using kernel driver
+ ===================================
+ 0000:18:00.0 'Device 159b' if=ens785f0 drv=ice unused=vfio-pci
- DMA devices using kernel driver
- ===============================
- 0000:00:04.0 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=vfio-pci
- 0000:00:04.1 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=vfio-pci
+ DMA devices using kernel driver
+ ===============================
+ 0000:00:04.0 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=vfio-pci
+ 0000:00:04.1 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=vfio-pci
Test case
=========
-Test Case1: Basic virtio0.95 interrupt test with 16 queues and cbdma enable
----------------------------------------------------------------------------
+Test Case 1: Basic virtio0.95 interrupt test with 16 queues and cbdma enable
+----------------------------------------------------------------------------
This case tests virtio0.95 pmd interrupt with l3fwd-power sample when vhost uses the asynchronous operations with CBDMA channels.
-1. Bind 16 cbdma channels and one NIC port to vfio-pci, then launch testpmd by below command::
+1. Bind 16 CBDMA channels and 1 NIC port to vfio-pci, then launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1ffff -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7;rxq8;rxq9;rxq10;rxq11;rxq12;rxq13;rxq14;rxq15]' \
- -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip --lcore-dma=[lcore1 at 0000:00:04.0,lcore2 at 0000:00:04.0,lcore3 at 0000:00:04.1,lcore3 at 0000:00:04.2,lcore4 at 0000:00:04.3,lcore5 at 0000:00:04.4,lcore6 at 0000:00:04.5,lcore7 at 0000:00:04.6,lcore8 at 0000:00:04.7,\
- lcore9 at 0000:80:04.0,lcore10 at 0000:80:04.1,lcore11 at 0000:80:04.2,lcore12 at 0000:80:04.3,lcore13 at 0000:80:04.4,lcore14 at 0000:80:04.5,lcore15 at 0000:80:04.6,lcore16 at 0000:80:04.7]
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1ffff -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=16,dmas=[txq0 at 0000:80:04.0;txq1 at 0000:80:04.1;txq2 at 0000:80:04.2;txq3 at 0000:80:04.3;txq4 at 0000:80:04.4;txq5 at 0000:80:04.5;txq6 at 0000:80:04.6;txq7 at 0000:80:04.7;txq8 at 0000:00:04.0;txq9 at 0000:00:04.1;txq10 at 0000:00:04.2;txq11 at 0000:00:04.3;txq12 at 0000:00:04.4;txq13 at 0000:00:04.5;txq14 at 0000:00:04.6;txq15 at 0000:00:04.7;rxq0 at 0000:80:04.0;rxq1 at 0000:80:04.1;rxq2 at 0000:80:04.2;rxq3 at 0000:80:04.3;rxq4 at 0000:80:04.4;rxq5 at 0000:80:04.5;rxq6 at 0000:80:04.6;rxq7 at 0000:80:04.7;rxq8 at 0000:00:04.0;rxq9 at 0000:00:04.1;rxq10 at 0000:00:04.2;rxq11 at 0000:00:04.3;rxq12 at 0000:00:04.4;rxq13 at 0000:00:04.5;rxq14 at 0000:00:04.6;rxq15 at 0000:00:04.7]' \
+ -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip
2. Launch VM1, set queues=16, vectors>=2xqueues+2, mq=on::
- taskset -c 34-35 qemu-system-x86_64 -name us-vhost-vm2 \
- -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
- -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=16 \
- -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=ture,mrg_rxbuf=on,csum=on,mq=on,vectors=40 \
- -vnc :11 -daemonize
+ taskset -c 34-35 qemu-system-x86_64 -name vm1 \
+ -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+ -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu22-04.img \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait \
+ -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char1,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=16 \
+ -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=true,mrg_rxbuf=on,csum=on,mq=on,vectors=40 \
+ -vnc :11 -daemonize
3. Bind virtio port to vfio-pci::
- modprobe vfio enable_unsafe_noiommu_mode=1
- modprobe vfio-pci
- ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
+ modprobe vfio enable_unsafe_noiommu_mode=1
+ modprobe vfio-pci
+ ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
4. In VM, launch l3fwd-power sample::
- ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -c 0x0ffff -n 4 --log-level='user1,7' \
- -- -p 1 -P --config '(0,0,0),(0,1,1),(0,2,2),(0,3,3)(0,4,4),(0,5,5),(0,6,6),(0,7,7)(0,8,8),(0,9,9),(0,10,10),(0,11,11)(0,12,12),(0,13,13),(0,14,14),(0,15,15)' \
- --no-numa --parse-ptype
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -c 0x0ffff -n 4 --log-level='user1,7' \
+ -- -p 1 -P --config '(0,0,0),(0,1,1),(0,2,2),(0,3,3)(0,4,4),(0,5,5),(0,6,6),(0,7,7)(0,8,8),(0,9,9),(0,10,10),(0,11,11)(0,12,12),(0,13,13),(0,14,14),(0,15,15)' \
+ --no-numa --parse-ptype
5. Send random dest IP packets to host NIC with packet generator, packets will distribute to all queues, check l3fwd-power log that all related cores are waked up.
@@ -127,37 +98,36 @@ This case tests virtio0.95 pmd interrupt with l3fwd-power sample when vhost uses
7. Stop the date transmitter, check all related core will be back to sleep status.
-Test Case2: Basic virtio-1.0 interrupt test with 4 queues and cbdma enable
---------------------------------------------------------------------------
+Test Case 2: Basic virtio-1.0 interrupt test with 4 queues and cbdma enable
+---------------------------------------------------------------------------
This case tests virtio1.0 pmd interrupt with l3fwd-power sample when vhost uses the asynchronous operations with CBDMA channels.
-1. Bind four cbdma channels and one NIC port to vfio-pci, then launch testpmd by below command::
+1. Bind 2 CBDMA channels and 1 NIC port to vfio-pci, then launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7c -n 4 \
- --vdev 'net_vhost0,iface=vhost-net,queues=4,dmas=[txq0;txq1;txq2;txq3;rxq0;rxq1;rxq2;rxq3]' \
- -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip --lcore-dma=[lcore3 at 0000:00:04.0,lcore4 at 0000:00:04.0,lcore5 at 0000:00:04.0,lcore5 at 0000:00:04.1,lcore6 at 0000:00:04.1]
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7c -n 4 \
+ --vdev 'net_vhost0,iface=vhost-net,queues=4,dmas=[txq0 at 0000:80:04.0;txq1 at 0000:80:04.0;txq2 at 0000:80:04.0;txq3 at 0000:80:04.0;rxq0 at 0000:80:04.1;rxq1 at 0000:80:04.1;rxq2 at 0000:80:04.1;rxq3 at 0000:80:04.1]' \
+ -- -i --nb-cores=4 --rxq=4 --txq=4 --rss-ip
2. Launch VM1, set queues=4, vectors>=2xqueues+2, mq=on::
- taskset -c 34-35 \
- qemu-system-x86_64 -name us-vhost-vm2 \
- -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
- -smp cores=4,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=4 \
- -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=false,mrg_rxbuf=on,csum=on,mq=on,vectors=15 \
- -vnc :11 -daemonize
+ taskset -c 34-35 qemu-system-x86_64 -name vm1 \
+ -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+ -smp cores=4,sockets=1 -drive file=/home/osimg/ubuntu22-04.img \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait \
+ -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char1,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=4 \
+ -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=false,mrg_rxbuf=on,csum=on,mq=on,vectors=15 -vnc :11 -daemonize
3. Bind virtio port to vfio-pci::
- modprobe vfio enable_unsafe_noiommu_mode=1
- modprobe vfio-pci
- ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
+ modprobe vfio enable_unsafe_noiommu_mode=1
+ modprobe vfio-pci
+ ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
4. In VM, launch l3fwd-power sample::
- ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -c 0xf -n 4 --log-level='user1,7' -- -p 1 -P --config="(0,0,0),(0,1,1),(0,2,2),(0,3,3)" --no-numa --parse-ptype
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -c 0xf -n 4 --log-level='user1,7' -- -p 1 -P --config="(0,0,0),(0,1,1),(0,2,2),(0,3,3)" --no-numa --parse-ptype
5. Send random dest IP packets to host NIC with packet generator, packets will distribute to all queues, check l3fwd-power log that all related cores are waked up.
@@ -165,38 +135,36 @@ This case tests virtio1.0 pmd interrupt with l3fwd-power sample when vhost uses
7. Stop the date transmitter, check all related core will be back to sleep status.
-Test Case3: Basic virtio-1.1 interrupt test with 16 queues and cbdma enable
------------------------------------------------------------------------------
+Test Case 3: Basic virtio-1.1 interrupt test with 16 queues and cbdma enable
+----------------------------------------------------------------------------
This case tests packed ring virtio-pmd interrupt with l3fwd-power sample when vhost uses the asynchronous operations with CBDMA channels.
-1. Bind 16 cbdma channels ports and one NIC port to vfio-pci, then launch testpmd by below command::
+1. Bind 4 CBDMA channels ports and 1 NIC port to vfio-pci, then launch testpmd by below command::
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1ffff -n 4 \
- --vdev 'eth_vhost0,iface=vhost-net,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15;rxq0;rxq1;rxq2;rxq3;rxq4;rxq5;rxq6;rxq7;rxq8;rxq9;rxq10;rxq11;rxq12;rxq13;rxq14;rxq15]' \
- -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip --lcore-dma=[lcore1 at 0000:00:04.0,lcore2 at 0000:00:04.0,lcore3 at 0000:00:04.1,lcore3 at 0000:00:04.2,lcore4 at 0000:00:04.3,lcore5 at 0000:00:04.4,lcore6 at 0000:00:04.5,lcore7 at 0000:00:04.6,lcore8 at 0000:00:04.7,\
- lcore9 at 0000:80:04.0,lcore10 at 0000:80:04.1,lcore11 at 0000:80:04.2,lcore12 at 0000:80:04.3,lcore13 at 0000:80:04.4,lcore14 at 0000:80:04.5,lcore15 at 0000:80:04.6,lcore16 at 0000:80:04.7]
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1ffff -n 4 \
+ --vdev 'eth_vhost0,iface=vhost-net,queues=16,dmas=[txq0 at 0000:80:04.0;txq1 at 0000:80:04.0;txq2 at 0000:80:04.0;txq3 at 0000:80:04.0;txq4 at 0000:80:04.1;txq5 at 0000:80:04.1;txq6 at 0000:80:04.1;txq7 at 0000:80:04.1;txq8 at 0000:80:04.2;txq9 at 0000:80:04.2;txq10 at 0000:80:04.2;txq11 at 0000:80:04.2;txq12 at 0000:80:04.3;txq13 at 0000:80:04.3;txq14 at 0000:80:04.3;txq15 at 0000:80:04.3;rxq0 at 0000:80:04.0;rxq1 at 0000:80:04.0;rxq2 at 0000:80:04.0;rxq3 at 0000:80:04.0;rxq4 at 0000:80:04.1;rxq5 at 0000:80:04.1;rxq6 at 0000:80:04.1;rxq7 at 0000:80:04.1;rxq8 at 0000:80:04.2;rxq9 at 0000:80:04.2;rxq10 at 0000:80:04.2;rxq11 at 0000:80:04.2;rxq12 at 0000:80:04.3;rxq13 at 0000:80:04.3;rxq14 at 0000:80:04.3;rxq15 at 0000:80:04.3]' \
+ -- -i --nb-cores=16 --rxq=16 --txq=16 --rss-ip
2. Launch VM1, set queues=16, vectors>=2xqueues+2, mq=on::
- taskset -c 34-35 \
- qemu-system-x86_64 -name us-vhost-vm2 \
- -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
- -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu1910.img \
- -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
- -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
- -chardev socket,id=char1,path=./vhost-net -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=16 \
- -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,disable-modern=false,mrg_rxbuf=on,csum=on,mq=on,vectors=40,packed=on \
- -vnc :11 -daemonize
+ taskset -c 34-35 qemu-system-x86_64 -name us-vhost-vm1 \
+ -cpu host -enable-kvm -m 2048 -object memory-backend-file,id=mem,size=2048M,mem-path=/mnt/huge,share=on -numa node,memdev=mem -mem-prealloc \
+ -smp cores=16,sockets=1 -drive file=/home/osimg/ubuntu22-04.img \
+ -monitor unix:/tmp/vm2_monitor.sock,server,nowait \
+ -device e1000,netdev=nttsip1 -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+ -chardev socket,id=char1,path=./vhost-net \
+ -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce,queues=16 \
+ -device virtio-net-pci,mac=52:54:00:00:00:02,netdev=mynet2,mrg_rxbuf=on,csum=on,mq=on,vectors=40,packed=on -vnc :11 -daemonize
3. Bind virtio port to vfio-pci::
- modprobe vfio enable_unsafe_noiommu_mode=1
- modprobe vfio-pci
- ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
+ modprobe vfio enable_unsafe_noiommu_mode=1
+ modprobe vfio-pci
+ ./usertools/dpdk-devbind.py --bind=vfio-pci xx:xx.x
4. In VM, launch l3fwd-power sample::
- ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -c 0x0ffff -n 4 --log-level='user1,7' -- -p 1 -P --config '(0,0,0),(0,1,1),(0,2,2),(0,3,3)(0,4,4),(0,5,5),(0,6,6),(0,7,7)(0,8,8),(0,9,9),(0,10,10),(0,11,11)(0,12,12),(0,13,13),(0,14,14),(0,15,15)' --no-numa --parse-ptype
+ ./x86_64-native-linuxapp-gcc/examples/dpdk-l3fwd-power -c 0x0ffff -n 4 --log-level='user1,7' -- -p 1 -P --config '(0,0,0),(0,1,1),(0,2,2),(0,3,3)(0,4,4),(0,5,5),(0,6,6),(0,7,7)(0,8,8),(0,9,9),(0,10,10),(0,11,11)(0,12,12),(0,13,13),(0,14,14),(0,15,15)' --no-numa --parse-ptype
5. Send random dest IP packets to host NIC with packet generator, packets will distribute to all queues, check l3fwd-power log that all related cores are waked up.
--
2.25.1
More information about the dts
mailing list