[DTS][PATCH V1 01/21] test_plans/dcf_lifecycle: update test plan to support represented port action from deprecated vf action
Ke Xu
ke1.xu at intel.com
Wed Sep 28 05:18:19 CEST 2022
Signed-off-by: Jin Ling <jin.ling at intel.com>
Reviewed-by: Ke Xu <ke1.xu at intel.com>
---
test_plans/dcf_lifecycle_test_plan.rst | 84 +++++++++++++-------------
1 file changed, 42 insertions(+), 42 deletions(-)
diff --git a/test_plans/dcf_lifecycle_test_plan.rst b/test_plans/dcf_lifecycle_test_plan.rst
index 53837142..d1b19fe1 100644
--- a/test_plans/dcf_lifecycle_test_plan.rst
+++ b/test_plans/dcf_lifecycle_test_plan.rst
@@ -176,7 +176,7 @@ Set a VF as trust ::
Launch dpdk on the VF, request DCF mode ::
./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf,representor=vf[1] --file-prefix=dcf -- -i
Launch another testpmd on the VF1, and start mac forward ::
@@ -187,7 +187,7 @@ Launch another testpmd on the VF1, and start mac forward ::
Set switch rule to VF1 `0000:18:01.1` from DCF ::
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions represented_port ethdev_port_id 1 / end
Send a scapy packet to VF1 ::
@@ -228,7 +228,7 @@ Set a VF as trust ::
Launch dpdk on the VF, request DCF mode ::
./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf,representor=vf[1] --file-prefix=dcf -- -i
Launch another testpmd on the VF1, and start mac forward ::
@@ -239,7 +239,7 @@ Launch another testpmd on the VF1, and start mac forward ::
Set switch rule to VF1 0000:18:01.1 from DCF ::
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions represented_port ethdev_port_id 1 / end
Send a scapy packet to VF1 ::
@@ -277,7 +277,7 @@ Set a VF as trust ::
Launch dpdk on the VF, request DCF mode ::
./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf,representor=vf[1] --file-prefix=dcf -- -i
Launch another testpmd on the VF1, and start mac forward ::
@@ -288,7 +288,7 @@ Launch another testpmd on the VF1, and start mac forward ::
Set switch rule to VF1 0000:18:01.1 from DCF ::
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions represented_port ethdev_port_id 1 / end
Send a scapy packet to VF1 ::
@@ -353,7 +353,7 @@ Set a VF as trust ::
Launch dpdk on the VF, request DCF mode ::
./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf,representor=vf[1-2] --file-prefix=dcf -- -i
Launch another testpmd on the VF1 and VF2, and start mac forward ::
@@ -369,8 +369,8 @@ Launch another testpmd on the VF1 and VF2, and start mac forward ::
Set switch rule to VF1 0000:18:01.1 from DCF ::
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.4 dst is 192.168.0.5 / end actions vf id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions represented_port ethdev_port_id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.4 dst is 192.168.0.5 / end actions represented_port ethdev_port_id 1 / end
Send a scapy packet to VF1 ::
@@ -421,9 +421,9 @@ Set a VF as trust ::
Launch dpdk on the VF, request DCF mode ::
./usertools/dpdk-devbind.py -b vfio-pci 18:01.0 18:01.1 18:01.2
- ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf --file-prefix=dcf -- -i
+ ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 6-10 -n 4 -a 18:01.0,cap=dcf,representor=vf[1-2] --file-prefix=dcf -- -i
-Launch another testpmd on the VF1, and start mac forward ::
+Launch another testpmd on the VF1 and VF2, and start mac forward ::
./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 11-14 -n 4 -a 18:01.1 -a 18:01.2 --file-prefix=vf -- -i
set verbose 1
@@ -432,7 +432,7 @@ Launch another testpmd on the VF1, and start mac forward ::
Set switch rule to VF1 0000:18:01.1 and VF2 0000:18:01.2 from DCF ::
- flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions vf id 1 / end
+ flow create 0 priority 0 ingress pattern eth / ipv4 src is 192.168.0.2 dst is 192.168.0.3 / end actions represented_port ethdev_port_id 1 / end
Send a scapy packet to VF1 and VF2 ::
@@ -1112,7 +1112,7 @@ The common steps launch two testpmds and kill DCF process, then relaunch two tes
..note::
For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
- For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf --file-prefix=dcf" for this test plan.
+ For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf,representor=vf[1] --file-prefix=dcf" for this test plan.
2. Launch another ``testpmd`` application on the VF1 of DUT as follows::
@@ -1134,7 +1134,7 @@ The common steps launch two testpmds and kill DCF process, then relaunch two tes
5. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1142,7 +1142,7 @@ The common steps launch two testpmds and kill DCF process, then relaunch two tes
6. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1191,7 +1191,7 @@ Test Steps
..note::
For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
- For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf --file-prefix=dcf" for this test plan.
+ For <DUT port pci device id>, you can use "0000:3b:01.0,cap=dcf,representor=vf[1] --file-prefix=dcf" for this test plan.
3. Send a matched packet in scapy to VF1, DCF flow rule is still valid and check the VF1 of DUT can receive the packet.
@@ -1216,7 +1216,7 @@ the VF1 of DUT::
5. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1224,7 +1224,7 @@ the VF1 of DUT::
6. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1270,7 +1270,7 @@ Test Steps
3. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1278,7 +1278,7 @@ Test Steps
4. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1326,7 +1326,7 @@ Test Steps
3. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1334,7 +1334,7 @@ Test Steps
4. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1380,7 +1380,7 @@ Test Steps
3. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1388,7 +1388,7 @@ Test Steps
4. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1434,7 +1434,7 @@ Test Steps
3. Validate a switch rule to VF1 in DCF testpmd::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1442,7 +1442,7 @@ Test Steps
4. Create a switch rule to VF1 in DCF testpmd and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1478,7 +1478,7 @@ The common steps launch one testpmd and kill DCF process, then relaunch one test
..note::
For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
- For <DUT port pci device id>, you can use"-a 3b:01.0,cap=dcf -a 3b:01.1 --file-prefix=dcf" for this test plan.
+ For <DUT port pci device id>, you can use"-a 3b:01.0,cap=dcf,representor=vf[1] -a 3b:01.1 --file-prefix=dcf" for this test plan.
2. Set verbose::
@@ -1491,7 +1491,7 @@ The common steps launch one testpmd and kill DCF process, then relaunch one test
4. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1499,7 +1499,7 @@ The common steps launch one testpmd and kill DCF process, then relaunch one test
5. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1542,7 +1542,7 @@ Test Steps
..note::
For <EAL options>, you can use "-c 0x6 -n 4", you can also refer to testpmd doc for other setings.
- For <DUT port pci device id>, you can use"-a 3b:01.0,cap=dcf -a 3b:01.1 --file-prefix=dcf" for this test plan.
+ For <DUT port pci device id>, you can use"-a 3b:01.0,cap=dcf,representor=vf[1] -a 3b:01.1 --file-prefix=dcf" for this test plan.
3. Set verbose::
@@ -1574,7 +1574,7 @@ DUT::
7. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1582,7 +1582,7 @@ DUT::
8. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1628,7 +1628,7 @@ Test Steps
3. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1636,7 +1636,7 @@ Test Steps
4. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1676,7 +1676,7 @@ Test Steps
testpmd> stop
testpmd> port stop 0
testpmd> port detach 0
- testpmd> port attach 3b:01.0,cap=dcf
+ testpmd> port attach 3b:01.0,cap=dcf,representor=vf[1]
testpmd> port reset 0
testpmd> port start 0
testpmd> start
@@ -1684,7 +1684,7 @@ Test Steps
3. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1692,7 +1692,7 @@ Test Steps
4. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1738,7 +1738,7 @@ Test Steps
3. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1746,7 +1746,7 @@ Test Steps
4. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1769,7 +1769,7 @@ DUT::
testpmd> port 1/queue 0: received 1 packets
src=00:11:22:33:44:55 - dst=C6:44:32:0A:EC:E1 - type=0x0800 - length=98 - nb_segs=1 - hw ptype: L2_ETHER L3_IPV4_EXT_UNKNOWN L4_NONFRAG - sw ptype: L2_ETHER L3_IPV4 - l2_len=14 - l3_len=20 - Receive queue=0x0
- ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
+ ol_flags: RTE_MBUF_F_RX_L4_CKSUM_GOOD RTE_MBUF_F_RX_IP_CKSUM_GOOD RTE_MBUF_F_RX_OUTER_L4_CKSUM_UNKNOWN
Test Case 10: one_testpmd_dcf_reset_mac
---------------------------------------
@@ -1792,7 +1792,7 @@ Test Steps
3. Validate a switch rule to VF1::
- testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow validate 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
@@ -1800,7 +1800,7 @@ Test Steps
4. Create a switch rule to VF1 and list rules::
- testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions vf id 1 / end
+ testpmd> flow create 0 priority 0 ingress pattern eth / ipv4 src is <ipv4 src> dst is <ipv4 dst> / end actions represented_port ethdev_port_id 1 / end
Get the message::
--
2.25.1
More information about the dts
mailing list