[DTS][PATCH V3 1/3] test_plans/vf_offload: fix wrong example packets.
Ke Xu
ke1.xu at intel.com
Wed Jan 4 08:20:51 CET 2023
Here we are to use TCP packets for TSO but UDP is listed in the test plan.
Signed-off-by: Ke Xu <ke1.xu at intel.com>
---
test_plans/vf_offload_test_plan.rst | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/test_plans/vf_offload_test_plan.rst b/test_plans/vf_offload_test_plan.rst
index f1720e41..4a4e49f6 100644
--- a/test_plans/vf_offload_test_plan.rst
+++ b/test_plans/vf_offload_test_plan.rst
@@ -445,11 +445,11 @@ Launch the userland ``testpmd`` application on DUT as follows::
Test IPv4() in scapy::
- sendp([Ether(dst="%s", src="52:00:00:00:00:00")/IP(src="192.168.1.1",dst="192.168.1.2")/UDP(sport=1021,dport=1021)/Raw(load="\x50"*%s)], iface="%s")
+ sendp([Ether(dst="%s", src="52:00:00:00:00:00")/IP(src="192.168.1.1",dst="192.168.1.2")/TCP(sport=1021,dport=1021)/Raw(load="\x50"*%s)], iface="%s")
Test IPv6() in scapy::
- sendp([Ether(dst="%s", src="52:00:00:00:00:00")/IPv6(src="FE80:0:0:0:200:1FF:FE00:200", dst="3555:5555:6666:6666:7777:7777:8888:8888")/UDP(sport=1021,dport=1021)/Raw(load="\x50"*%s)], iface="%s")
+ sendp([Ether(dst="%s", src="52:00:00:00:00:00")/IPv6(src="FE80:0:0:0:200:1FF:FE00:200", dst="3555:5555:6666:6666:7777:7777:8888:8888")/TCP(sport=1021,dport=1021)/Raw(load="\x50"*%s)], iface="%s")
Test case: csum fwd engine, use tunnel TSO
@@ -497,9 +497,9 @@ Launch the userland ``testpmd`` application on DUT as follows::
Test IPv4() in scapy::
for one_outer_packet in outer_packet_list:
- sendp([Ether(dst="%s", src="52:00:00:00:00:00")/one_outer_packet/IP(src="192.168.1.1",dst="192.168.1.2")/UDP(sport=1021,dport=1021)/Raw(load="\x50"*%s)], iface="%s")
+ sendp([Ether(dst="%s", src="52:00:00:00:00:00")/one_outer_packet/IP(src="192.168.1.1",dst="192.168.1.2")/TCP(sport=1021,dport=1021)/Raw(load="\x50"*%s)], iface="%s")
Test IPv6() in scapy::
for one_outer_packet in outer_packet_list:
- sendp([Ether(dst="%s", src="52:00:00:00:00:00")/one_outer_packet/IPv6(src="FE80:0:0:0:200:1FF:FE00:200", dst="3555:5555:6666:6666:7777:7777:8888:8888")/UDP(sport=1021,dport=1021)/Raw(load="\x50"*%s)], iface="%s")
+ sendp([Ether(dst="%s", src="52:00:00:00:00:00")/one_outer_packet/IPv6(src="FE80:0:0:0:200:1FF:FE00:200", dst="3555:5555:6666:6666:7777:7777:8888:8888")/TCP(sport=1021,dport=1021)/Raw(load="\x50"*%s)], iface="%s")
--
2.25.1
More information about the dts
mailing list