[dpdk-stable] [dpdk-dev 2/2] app: enable HW CRC strip by default
Jeff Guo
jia.guo at intel.com
Thu May 18 04:06:31 CEST 2017
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
app's rxmode, VF driver will report the VF launch failure. So this
patch default to enable HW CRC strip to let VF launch successful.
Signed-off-by: Jeff Guo <jia.guo at intel.com>
Acked-by: Jingjing Wu <jingjing.wu at intel.com>
---
app/test-pipeline/init.c | 2 +-
app/test-pmd/parameters.c | 8 ++++----
app/test-pmd/testpmd.c | 2 +-
app/test/test_kni.c | 2 +-
app/test/test_link_bonding.c | 4 ++--
app/test/test_link_bonding_mode4.c | 2 +-
app/test/test_link_bonding_rssconf.c | 4 ++--
app/test/test_pmd_perf.c | 2 +-
doc/guides/nics/thunderx.rst | 2 +-
doc/guides/testpmd_app_ug/run_app.rst | 4 ++--
doc/guides/testpmd_app_ug/testpmd_funcs.rst | 4 ++--
11 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/app/test-pipeline/init.c b/app/test-pipeline/init.c
index aef082f..00dbc27 100644
--- a/app/test-pipeline/init.c
+++ b/app/test-pipeline/init.c
@@ -105,7 +105,7 @@ static struct rte_eth_conf port_conf = {
.hw_ip_checksum = 1, /* IP checksum offload enabled */
.hw_vlan_filter = 0, /* VLAN filtering disabled */
.jumbo_frame = 0, /* Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /* CRC stripped by hardware */
+ .hw_strip_crc = 1, /* CRC stripped by hardware */
},
.rx_adv_conf = {
.rss_conf = {
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 08e5a76..2f96953 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -148,7 +148,7 @@ usage(char* progname)
"the packet will be enqueued into the rx drop-queue. "
"If the drop-queue doesn't exist, the packet is dropped. "
"By default drop-queue=127.\n");
- printf(" --crc-strip: enable CRC stripping by hardware.\n");
+ printf(" --disable-crc-strip: disable CRC stripping by hardware.\n");
printf(" --enable-lro: enable large receive offload.\n");
printf(" --enable-rx-cksum: enable rx hardware checksum offload.\n");
printf(" --disable-hw-vlan: disable hardware vlan.\n");
@@ -525,7 +525,7 @@ launch_args_parse(int argc, char** argv)
{ "pkt-filter-report-hash", 1, 0, 0 },
{ "pkt-filter-size", 1, 0, 0 },
{ "pkt-filter-drop-queue", 1, 0, 0 },
- { "crc-strip", 0, 0, 0 },
+ { "disable-crc-strip", 0, 0, 0 },
{ "enable-lro", 0, 0, 0 },
{ "enable-rx-cksum", 0, 0, 0 },
{ "enable-scatter", 0, 0, 0 },
@@ -765,8 +765,8 @@ launch_args_parse(int argc, char** argv)
"drop queue %d invalid - must"
"be >= 0 \n", n);
}
- if (!strcmp(lgopts[opt_idx].name, "crc-strip"))
- rx_mode.hw_strip_crc = 1;
+ if (!strcmp(lgopts[opt_idx].name, "disable-crc-strip"))
+ rx_mode.hw_strip_crc = 0;
if (!strcmp(lgopts[opt_idx].name, "enable-lro"))
rx_mode.enable_lro = 1;
if (!strcmp(lgopts[opt_idx].name, "enable-scatter"))
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index a0332c2..523055c 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -283,7 +283,7 @@ struct rte_eth_rxmode rx_mode = {
.hw_vlan_strip = 1, /**< VLAN strip enabled. */
.hw_vlan_extend = 0, /**< Extended VLAN disabled. */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
- .hw_strip_crc = 0, /**< CRC stripping by hardware disabled. */
+ .hw_strip_crc = 1, /**< CRC stripping by hardware enabled. */
};
struct rte_fdir_conf fdir_conf = {
diff --git a/app/test/test_kni.c b/app/test/test_kni.c
index 309741c..db17fdf 100644
--- a/app/test/test_kni.c
+++ b/app/test/test_kni.c
@@ -92,7 +92,7 @@ static const struct rte_eth_conf port_conf = {
.hw_ip_checksum = 0,
.hw_vlan_filter = 0,
.jumbo_frame = 0,
- .hw_strip_crc = 0,
+ .hw_strip_crc = 1,
},
.txmode = {
.mq_mode = ETH_DCB_NONE,
diff --git a/app/test/test_link_bonding.c b/app/test/test_link_bonding.c
index 3229660..52d2d05 100644
--- a/app/test/test_link_bonding.c
+++ b/app/test/test_link_bonding.c
@@ -172,7 +172,7 @@ struct rte_eth_rxmode rx_mode = {
.hw_vlan_strip = 1, /**< VLAN strip enabled. */
.hw_vlan_extend = 0, /**< Extended VLAN disabled. */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled. */
- .hw_strip_crc = 0, /**< CRC stripping by hardware disabled. */
+ .hw_strip_crc = 1, /**< CRC stripping by hardware enabled. */
};
struct rte_fdir_conf fdir_conf = {
@@ -191,7 +191,7 @@ static struct rte_eth_conf default_pmd_conf = {
.hw_ip_checksum = 0, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
diff --git a/app/test/test_link_bonding_mode4.c b/app/test/test_link_bonding_mode4.c
index 53caa3e..dc33973 100644
--- a/app/test/test_link_bonding_mode4.c
+++ b/app/test/test_link_bonding_mode4.c
@@ -143,7 +143,7 @@ static struct rte_eth_conf default_pmd_conf = {
.hw_ip_checksum = 0, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
diff --git a/app/test/test_link_bonding_rssconf.c b/app/test/test_link_bonding_rssconf.c
index 34f1c16..e11da9b 100644
--- a/app/test/test_link_bonding_rssconf.c
+++ b/app/test/test_link_bonding_rssconf.c
@@ -116,7 +116,7 @@ static struct rte_eth_conf default_pmd_conf = {
.hw_ip_checksum = 0, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
@@ -133,7 +133,7 @@ static struct rte_eth_conf rss_pmd_conf = {
.hw_ip_checksum = 0, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
diff --git a/app/test/test_pmd_perf.c b/app/test/test_pmd_perf.c
index e055aa0..1ffd65a 100644
--- a/app/test/test_pmd_perf.c
+++ b/app/test/test_pmd_perf.c
@@ -100,7 +100,7 @@ static struct rte_eth_conf port_conf = {
.hw_vlan_strip = 0, /**< VLAN strip enabled. */
.hw_vlan_extend = 0, /**< Extended VLAN disabled. */
.jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ .hw_strip_crc = 1, /**< CRC stripped by hardware */
.enable_scatter = 0, /**< scatter rx disabled */
},
.txmode = {
diff --git a/doc/guides/nics/thunderx.rst b/doc/guides/nics/thunderx.rst
index 187c9a4..b12cc8e 100644
--- a/doc/guides/nics/thunderx.rst
+++ b/doc/guides/nics/thunderx.rst
@@ -156,7 +156,7 @@ managed by ``librte_pmd_thunderx_nicvf`` in the Linux operating system.
.. code-block:: console
./arm64-thunderx-linuxapp-gcc/app/testpmd -c 0xf -n 4 -w 0002:01:00.2 \
- -- -i --disable-hw-vlan-filter --crc-strip --no-flush-rx \
+ -- -i --disable-hw-vlan-filter --no-flush-rx \
--port-topology=loop
Example output:
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index d7c5120..ac7d458 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -281,9 +281,9 @@ The commandline options are:
In perfect filter mode, when a rule is added with queue = -1, the packet will be enqueued into the RX drop-queue.
If the drop-queue does not exist, the packet is dropped. The default value is N=127.
-* ``--crc-strip``
+* ``--disable-crc-strip``
- Enable hardware CRC stripping.
+ Disable hardware CRC stripping.
* ``--enable-lro``
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index f1c269a..70d2e4d 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1257,9 +1257,9 @@ Set hardware CRC stripping on or off for all ports::
testpmd> port config all crc-strip (on|off)
-CRC stripping is off by default.
+CRC stripping is on by default.
-The ``on`` option is equivalent to the ``--crc-strip`` command-line option.
+The ``off`` option is equivalent to the ``--disable-crc-strip`` command-line option.
port config - scatter
~~~~~~~~~~~~~~~~~~~~~~~
--
2.7.4
More information about the stable
mailing list