[dpdk-stable] [PATCH] net/mlx5: fix handling link status event

Yuanhan Liu yliu at fridaylinux.org
Tue Feb 13 12:53:42 CET 2018


On Mon, Feb 12, 2018 at 10:20:22AM -0800, Yongseok Koh wrote:
> [ backported from upstream commit c7bf62255edf ]
> 
> Even though link of a port gets down, device still can receive traffic.
> That is the reason why mlx5_set_link_up/down() switches rx/tx_pkt_burst().
> However, if link gets down by an external command (e.g. ifconfig), it isn't
> effective. It is better to change burst functions when link status change
> is detected.
> 
> Fixes: 62072098b54e ("mlx5: support setting link up or down")
> Cc: stable at dpdk.org
> 
> Signed-off-by: Yongseok Koh <yskoh at mellanox.com>
> Acked-by: Nelio Laranjeiro <nelio.laranjeiro at 6wind.com>

Applied to dpdk-stable/17.11.

Thanks!

	--yliu
> ---
>  drivers/net/mlx5/mlx5.c         |   1 -
>  drivers/net/mlx5/mlx5.h         |   1 +
>  drivers/net/mlx5/mlx5_ethdev.c  | 118 ++++++++++++++++++++++++++++++----------
>  drivers/net/mlx5/mlx5_trigger.c |  23 ++------
>  4 files changed, 95 insertions(+), 48 deletions(-)
> 
> diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
> index eba674269..40804b3e6 100644
> --- a/drivers/net/mlx5/mlx5.c
> +++ b/drivers/net/mlx5/mlx5.c
> @@ -932,7 +932,6 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
>  		/* Bring Ethernet device up. */
>  		DEBUG("forcing Ethernet interface up");
>  		priv_set_flags(priv, ~IFF_UP, IFF_UP);
> -		mlx5_link_update(priv->dev, 1);
>  		continue;
>  
>  port_error:
> diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
> index 1a4f444c7..de9071f5d 100644
> --- a/drivers/net/mlx5/mlx5.h
> +++ b/drivers/net/mlx5/mlx5.h
> @@ -210,6 +210,7 @@ int priv_set_flags(struct priv *, unsigned int, unsigned int);
>  int mlx5_dev_configure(struct rte_eth_dev *);
>  void mlx5_dev_infos_get(struct rte_eth_dev *, struct rte_eth_dev_info *);
>  const uint32_t *mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev);
> +int priv_link_update(struct priv *, int);
>  int mlx5_link_update(struct rte_eth_dev *, int);
>  int mlx5_dev_set_mtu(struct rte_eth_dev *, uint16_t);
>  int mlx5_dev_get_flow_ctrl(struct rte_eth_dev *, struct rte_eth_fc_conf *);
> diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
> index e91c0f633..25f84e9bc 100644
> --- a/drivers/net/mlx5/mlx5_ethdev.c
> +++ b/drivers/net/mlx5/mlx5_ethdev.c
> @@ -914,25 +914,104 @@ mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev, int wait_to_complete)
>  }
>  
>  /**
> - * DPDK callback to retrieve physical link information.
> + * Enable receiving and transmitting traffic.
>   *
> - * @param dev
> - *   Pointer to Ethernet device structure.
> + * @param priv
> + *   Pointer to private structure.
> + */
> +static void
> +priv_link_start(struct priv *priv)
> +{
> +	struct rte_eth_dev *dev = priv->dev;
> +	int err;
> +
> +	priv_dev_select_tx_function(priv, dev);
> +	priv_dev_select_rx_function(priv, dev);
> +	err = priv_dev_traffic_enable(priv, dev);
> +	if (err)
> +		ERROR("%p: error occurred while configuring control flows: %s",
> +		      (void *)priv, strerror(err));
> +	err = priv_flow_start(priv, &priv->flows);
> +	if (err)
> +		ERROR("%p: error occurred while configuring flows: %s",
> +		      (void *)priv, strerror(err));
> +}
> +
> +/**
> + * Disable receiving and transmitting traffic.
> + *
> + * @param priv
> + *   Pointer to private structure.
> + */
> +static void
> +priv_link_stop(struct priv *priv)
> +{
> +	struct rte_eth_dev *dev = priv->dev;
> +
> +	priv_flow_stop(priv, &priv->flows);
> +	priv_dev_traffic_disable(priv, dev);
> +	dev->rx_pkt_burst = removed_rx_burst;
> +	dev->tx_pkt_burst = removed_tx_burst;
> +}
> +
> +/**
> + * Retrieve physical link information and update rx/tx_pkt_burst callbacks
> + * accordingly.
> + *
> + * @param priv
> + *   Pointer to private structure.
>   * @param wait_to_complete
>   *   Wait for request completion (ignored).
>   */
>  int
> -mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
> +priv_link_update(struct priv *priv, int wait_to_complete)
>  {
> +	struct rte_eth_dev *dev = priv->dev;
>  	struct utsname utsname;
>  	int ver[3];
> +	int ret;
> +	struct rte_eth_link dev_link = dev->data->dev_link;
>  
>  	if (uname(&utsname) == -1 ||
>  	    sscanf(utsname.release, "%d.%d.%d",
>  		   &ver[0], &ver[1], &ver[2]) != 3 ||
>  	    KERNEL_VERSION(ver[0], ver[1], ver[2]) < KERNEL_VERSION(4, 9, 0))
> -		return mlx5_link_update_unlocked_gset(dev, wait_to_complete);
> -	return mlx5_link_update_unlocked_gs(dev, wait_to_complete);
> +		ret = mlx5_link_update_unlocked_gset(dev, wait_to_complete);
> +	else
> +		ret = mlx5_link_update_unlocked_gs(dev, wait_to_complete);
> +	/* If lsc interrupt is disabled, should always be ready for traffic. */
> +	if (!dev->data->dev_conf.intr_conf.lsc) {
> +		priv_link_start(priv);
> +		return ret;
> +	}
> +	/* Re-select burst callbacks only if link status has been changed. */
> +	if (!ret && dev_link.link_status != dev->data->dev_link.link_status) {
> +		if (dev->data->dev_link.link_status == ETH_LINK_UP)
> +			priv_link_start(priv);
> +		else
> +			priv_link_stop(priv);
> +	}
> +	return ret;
> +}
> +
> +/**
> + * DPDK callback to retrieve physical link information.
> + *
> + * @param dev
> + *   Pointer to Ethernet device structure.
> + * @param wait_to_complete
> + *   Wait for request completion (ignored).
> + */
> +int
> +mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
> +{
> +	struct priv *priv = dev->data->dev_private;
> +	int ret;
> +
> +	priv_lock(priv);
> +	ret = priv_link_update(priv, wait_to_complete);
> +	priv_unlock(priv);
> +	return ret;
>  }
>  
>  /**
> @@ -1151,7 +1230,7 @@ priv_link_status_update(struct priv *priv)
>  {
>  	struct rte_eth_link *link = &priv->dev->data->dev_link;
>  
> -	mlx5_link_update(priv->dev, 0);
> +	priv_link_update(priv, 0);
>  	if (((link->link_speed == 0) && link->link_status) ||
>  		((link->link_speed != 0) && !link->link_status)) {
>  		/*
> @@ -1354,8 +1433,6 @@ priv_dev_interrupt_handler_install(struct priv *priv, struct rte_eth_dev *dev)
>   *
>   * @param priv
>   *   Pointer to private data structure.
> - * @param dev
> - *   Pointer to rte_eth_dev structure.
>   * @param up
>   *   Nonzero for link up, otherwise link down.
>   *
> @@ -1363,24 +1440,9 @@ priv_dev_interrupt_handler_install(struct priv *priv, struct rte_eth_dev *dev)
>   *   0 on success, errno value on failure.
>   */
>  static int
> -priv_dev_set_link(struct priv *priv, struct rte_eth_dev *dev, int up)
> +priv_dev_set_link(struct priv *priv, int up)
>  {
> -	int err;
> -
> -	if (up) {
> -		err = priv_set_flags(priv, ~IFF_UP, IFF_UP);
> -		if (err)
> -			return err;
> -		priv_dev_select_tx_function(priv, dev);
> -		priv_dev_select_rx_function(priv, dev);
> -	} else {
> -		err = priv_set_flags(priv, ~IFF_UP, ~IFF_UP);
> -		if (err)
> -			return err;
> -		dev->rx_pkt_burst = removed_rx_burst;
> -		dev->tx_pkt_burst = removed_tx_burst;
> -	}
> -	return 0;
> +	return priv_set_flags(priv, ~IFF_UP, up ? IFF_UP : ~IFF_UP);
>  }
>  
>  /**
> @@ -1399,7 +1461,7 @@ mlx5_set_link_down(struct rte_eth_dev *dev)
>  	int err;
>  
>  	priv_lock(priv);
> -	err = priv_dev_set_link(priv, dev, 0);
> +	err = priv_dev_set_link(priv, 0);
>  	priv_unlock(priv);
>  	return err;
>  }
> @@ -1420,7 +1482,7 @@ mlx5_set_link_up(struct rte_eth_dev *dev)
>  	int err;
>  
>  	priv_lock(priv);
> -	err = priv_dev_set_link(priv, dev, 1);
> +	err = priv_dev_set_link(priv, 1);
>  	priv_unlock(priv);
>  	return err;
>  }
> diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
> index 39c5ec5d2..01780ef18 100644
> --- a/drivers/net/mlx5/mlx5_trigger.c
> +++ b/drivers/net/mlx5/mlx5_trigger.c
> @@ -154,38 +154,23 @@ mlx5_dev_start(struct rte_eth_dev *dev)
>  		      (void *)dev, strerror(err));
>  		goto error;
>  	}
> -	/* Update send callback. */
> -	priv_dev_select_tx_function(priv, dev);
>  	err = priv_rxq_start(priv);
>  	if (err) {
>  		ERROR("%p: RXQ allocation failed: %s",
>  		      (void *)dev, strerror(err));
>  		goto error;
>  	}
> -	/* Update receive callback. */
> -	priv_dev_select_rx_function(priv, dev);
> -	err = priv_dev_traffic_enable(priv, dev);
> -	if (err) {
> -		ERROR("%p: an error occurred while configuring control flows:"
> -		      " %s",
> -		      (void *)priv, strerror(err));
> -		goto error;
> -	}
> -	err = priv_flow_start(priv, &priv->flows);
> -	if (err) {
> -		ERROR("%p: an error occurred while configuring flows:"
> -		      " %s",
> -		      (void *)priv, strerror(err));
> -		goto error;
> -	}
>  	err = priv_rx_intr_vec_enable(priv);
>  	if (err) {
>  		ERROR("%p: RX interrupt vector creation failed",
>  		      (void *)priv);
>  		goto error;
>  	}
> -	priv_dev_interrupt_handler_install(priv, dev);
>  	priv_xstats_init(priv);
> +	/* Update link status and Tx/Rx callbacks for the first time. */
> +	memset(&dev->data->dev_link, 0, sizeof(struct rte_eth_link));
> +	priv_link_update(priv, 1);
> +	priv_dev_interrupt_handler_install(priv, dev);
>  	priv_unlock(priv);
>  	return 0;
>  error:
> -- 
> 2.11.0


More information about the stable mailing list