[dpdk-stable] [PATCH] net/mlx4: fix no broadcasts reception in promisc
Shahaf Shuler
shahafs at mellanox.com
Thu Jan 25 18:45:17 CET 2018
Thursday, January 25, 2018 7:12 PM, Mordechay Haimovsky:
not support "don't care" bits in its flow spec mask, therefore
> we do cannot use The following rules used by mlx5 for promiscuous and
> allmulti:
> if (dev->data->promiscuous) {
> struct rte_flow_item_eth promisc = {
> .dst.addr_bytes = "\x00\x00\x00\x00\x00\x00",
> .src.addr_bytes = "\x00\x00\x00\x00\x00\x00",
> .type = 0,
> };
>
> claim_zero(mlx5_ctrl_flow(dev, &promisc, &promisc));
> return 0;
> }
> if (dev->data->all_multicast) {
> struct rte_flow_item_eth multicast = {
> .dst.addr_bytes = "\x01\x00\x00\x00\x00\x00",
> .src.addr_bytes = "\x00\x00\x00\x00\x00\x00",
> .type = 0,
> };
>
> What we can use instead In order to place the device in promiscuous mode
> is:
> struct all_flow_attr {
> struct ibv_flow_attr attr;
> } __attribute__((packed)) all_attr = {
> .attr = {
> .comp_mask = 0,
> .type = IBV_FLOW_ATTR_ALL_DEFAULT,
> .size = sizeof(all_attr),
> .priority = 0,
> .num_of_specs = 0,
> .port = PORT_NUM,
> .flags = 0,
> },
> };
> struct ibv_flow *all_flow;
> all_flow = ibv_create_flow(qp, &all_attr.attr);
>
> Now *_DEFAULT rules are low priority rules which catch the appropriate
> traffic which was not caught by another rule.
> There is probably another rule for BC which is added in the driver that
> catches the BC, that is why we do not see it.
> When we add an additional BC rule, we will also get it.
Thanks, understood.
7, 2018 1:05 PM, Moti Haimovsky
> > > Subject: [dpdk-stable] [PATCH] net/mlx4: fix no broadcasts reception
> > > in promisc
> > >
> > > This patch fixes the issue of mlx4 not receiving broadcast packets
> > > when configured to work promiscuous mode.
> > >
> > > Fixes: eacaac7bae36 ("net/mlx4: restore promisc and allmulti
> > > support")
> > > Cc: stable at dpdk.org
> > >
> > > Signed-off-by: Moti Haimovsky <motih at mellanox.com>
> > > ---
> > > drivers/net/mlx4/mlx4_flow.c | 16 ++++++++--------
> > > 1 file changed, 8 insertions(+), 8 deletions(-)
> > >
> > > diff --git a/drivers/net/mlx4/mlx4_flow.c
> > > b/drivers/net/mlx4/mlx4_flow.c index 69025da..ec13f5a 100644
> > > --- a/drivers/net/mlx4/mlx4_flow.c
> > > +++ b/drivers/net/mlx4/mlx4_flow.c
> > > @@ -1223,9 +1223,12 @@ struct mlx4_drop {
> > > *
> > > * Various flow rules are created depending on the mode the device is in:
> > > *
> > > - * 1. Promiscuous: port MAC + catch-all (VLAN filtering is ignored).
> > > - * 2. All multicast: port MAC/VLAN + catch-all multicast.
> > > - * 3. Otherwise: port MAC/VLAN + broadcast MAC/VLAN.
> > > + * 1. Promiscuous:
> > > + * port MAC + broadcast + catch-all (VLAN filtering is ignored).
No need to add here anything. Promiscuous includes broadcasts by definition.
> > > + * 2. All multicast:
> > > + * port MAC/VLAN + broadcast + catch-all multicast.
No need to add here anything. All multi includes broadcasts by definition.
If no further comments from Adrien, and you agree, I can fix those two during the merge (no need for another version).
Adrien - please have a look on it tomorrow
Reviewed-by: Shahaf Shuler <shahafs at mellanox.com>
More information about the stable
mailing list