[dpdk-stable] [dpdk-dev] [PATCH v2] net/e1000: Support mtu set for igbvf.

[Ian Stokes]

On 7/10/2018 2:03 AM, Lu, Wenzhuo wrote:
> Hi Ian,
> 
> 
>> -----Original Message-----
>> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Ian Stokes
>> Sent: Friday, June 29, 2018 9:51 PM
>> To: dev at dpdk.org
>> Cc: Stokes, Ian <ian.stokes at intel.com>; stable at dpdk.org
>> Subject: [dpdk-dev] [PATCH v2] net/e1000: Support mtu set for igbvf.
>>
>> This patch enables setting the MTU of an igbvf device by re-using the
>> eth_igb_mtu_set() in igbvf_eth_dev_ops.
>>
>> Cc: stable at dpdk.org
>>
>> Signed-off-by: Ian Stokes <ian.stokes at intel.com>
>> ---
>>   drivers/net/e1000/igb_ethdev.c | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
>> index edc7be3..650e831 100644
>> --- a/drivers/net/e1000/igb_ethdev.c
>> +++ b/drivers/net/e1000/igb_ethdev.c
>> @@ -442,6 +442,7 @@ static const struct eth_dev_ops igbvf_eth_dev_ops =
>> {
>>   	.txq_info_get         = igb_txq_info_get,
>>   	.mac_addr_set         = igbvf_default_mac_addr_set,
>>   	.get_reg              = igbvf_get_regs,
>> +	.mtu_set              = eth_igb_mtu_set,
> I think "eth_igb_mtu_set" is PF specific function that cannot be used on VF. As it touches PF specific registers.
> Looks like MTU setting even not supported by igb VF.
> 

Thanks for the feedback,

I'm surprised it's not supported, is there documentation somewhere for this?

I have tested this patch for an IGB SRIOV device and it worked without 
issue as far as I could tell, I was able to set the MTU for the igb vf, 
packets less than or equal to the mtu were passed, packets above the mtu 
were dropped as expected. Packets that were passed were not corrupted. 
I've tested this with OVS DPDK.

I've spotted that a few of the class functions for the igbvf eth ops use 
eth_igb functions, is it the case that some features are supported for 
both devices? (I had assumed this albeit maybe incorrectly).

Ian