[dpdk-stable] [dpdk-dev] 18.11.1 patches review and test
Ian Stokes
ian.stokes at intel.com
Wed Apr 3 11:16:42 CEST 2019
On 3/22/2019 3:10 PM, Kevin Traynor wrote:
> Hi all,
>
> Here is a list of patches targeted for LTS release 18.11.1. Please
> help review and test. The planned date for the final release is
> April 8th. Before that, please shout if anyone has objections with these
> patches being applied.
>
> Also for the companies committed to running regression tests,
> please run the tests and report any issue before the release date.
>
> To avoid further delays, in the absence of any reported release blockers
> the release will go ahead on April 8th. I will add some release notes
> regarding list of bugfixes and areas validated.
Hi Kevin,
I've validated with current head OVS Master and OVS 2.11.0 with VSPERF.
Tested with i40e (X710), ixgbe (82599ES) and igb(I350) devices.
Following tests were conducted and passed:
* vswitch_p2p_tput: vSwitch - configure switch and execute RFC2544
throughput test.
* vswitch_p2p_cont: vSwitch - configure switch and execute RFC2544
continuous stream test.
* vswitch_pvp_tput: vSwitch - configure switch, vnf and execute RFC2544
throughput test.
* vswitch_pvp_cont: vSwitch - configure switch, vnf and execute RFC2544
continuous stream test.
* ovsdpdk_hotplug_attach: Ensure successful port-add after binding a
device to igb_uio after ovs-vswitchd is launched.
* ovsdpdk_mq_p2p_rxqs: Setup rxqs on NIC port.
* ovsdpdk_mq_pvp_rxqs: Setup rxqs on vhost user port.
* ovsdpdk_mq_pvp_rxqs_linux_bridge: Confirm traffic received over vhost
RXQs with Linux virtio device in guest.
* ovsdpdk_mq_pvp_rxqs_testpmd: Confirm traffic received over vhost RXQs
with DPDK device in guest.
* ovsdpdk_vhostuser_client: Test vhost-user client mode.
* ovsdpdk_vhostuser_client_reconnect: Test vhost-user
client mode reconnect feature.
* ovsdpdk_vhostuser_server: Test vhost-user server mode.
* ovsdpdk_vhostuser_sock_dir: Verify functionality of vhost-sock-dir flag.
* ovsdpdk_vdev_add_null_pmd: Test addition of port using the null DPDK
PMD driver.
* ovsdpdk_vdev_del_null_pmd: Test deletion of port using the null DPDK
PMD driver.
* ovsdpdk_vdev_add_af_packet_pmd: Test addition of port using the
af_packet DPDK PMD driver.
* ovsdpdk_vdev_del_af_packet_pmd: Test deletion of port using the
af_packet DPDK PMD driver.
* ovsdpdk_numa: Test vhost-user NUMA support. Vhostuser PMD threads
should migrate to the same numa slot, where QEMU is executed.
* ovsdpdk_jumbo_p2p: Ensure that jumbo frames are received, processed
and forwarded correctly by DPDK physical ports.
* ovsdpdk_jumbo_pvp: Ensure that jumbo frames are received, processed
and forwarded correctly by DPDK vhost-user ports.
* ovsdpdk_jumbo_p2p_upper_bound: Ensure that jumbo frames above the
configured Rx port's MTU are not accepted.
* ovsdpdk_jumbo_mtu_upper_bound_vport: Verify that the upper bound limit
is enforced for OvS DPDK vhost-user ports.
* ovsdpdk_rate_p2p: Ensure when a user creates a rate limiting physical
interface that the traffic is limited to the specified policer rate in a
p2p setup.
* ovsdpdk_rate_pvp: Ensure when a user creates a rate limiting vHost
User interface that the traffic is limited to the specified policer rate
in a pvp setup.
* ovsdpdk_qos_p2p: In a p2p setup, ensure when a QoS egress policer is
created that the traffic is limited to the specified rate.
* ovsdpdk_qos_pvp: In a pvp setup, ensure when a QoS egress policer is
created that the traffic is limited to the specified rate.
Regards
Ian
More information about the stable
mailing list