[dpdk-stable] patch 'net/ixgbe: fix MACsec setting' has been queued to LTS release 18.11.6
Kevin Traynor
ktraynor at redhat.com
Thu Dec 12 11:01:51 CET 2019
On 12/12/2019 02:42, Sun, GuinanX wrote:
> Hi, Kevin
>
Hi Guinan,
Thanks for the note. I have both these patches queued,
> macsec fix has two patches:
>
> http://patches.dpdk.org/patch/62265/
https://github.com/kevintraynor/dpdk-stable-queue/commit/7137dc35798febc3ab6738921eab092ca5c4ac0e
> and http://patches.dpdk.org/patch/63196/
>
https://github.com/kevintraynor/dpdk-stable-queue/commit/f4d7ffe6e960c5edafc4073d724f6ad5d3247800
Kevin.
>
> The 62265 patch is used to fix the problem that the macsec setting is invalid when the port is stopped.
>
> The 63196 patch is used to fix the QoS sample application performance drop issue caused by 62265.
>
> Please must merge patch 63196 after merging patch 62265.
>
> Best Regards
> Guinan Sun
>
>> -----Original Message-----
>> From: Kevin Traynor [mailto:ktraynor at redhat.com]
>> Sent: Thursday, December 12, 2019 5:26 AM
>> To: Sun, GuinanX <guinanx.sun at intel.com>
>> Cc: Ye, Xiaolong <xiaolong.ye at intel.com>; dpdk stable <stable at dpdk.org>
>> Subject: patch 'net/ixgbe: fix MACsec setting' has been queued to LTS release
>> 18.11.6
>>
>> Hi,
>>
>> FYI, your patch has been queued to LTS release 18.11.6
>>
>> Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
>> It will be pushed if I get no objections before 12/17/19. So please shout if
>> anyone has objections.
>>
>> Also note that after the patch there's a diff of the upstream commit vs the patch
>> applied to the branch. This will indicate if there was any rebasing needed to
>> apply to the stable branch. If there were code changes for rebasing
>> (ie: not only metadata diffs), please double check that the rebase was correctly
>> done.
>>
>> Queued patches are on a temporary branch at:
>> https://github.com/kevintraynor/dpdk-stable-queue
>>
>> This queued commit can be viewed at:
>> https://github.com/kevintraynor/dpdk-stable-
>> queue/commit/7137dc35798febc3ab6738921eab092ca5c4ac0e
>>
>> Thanks.
>>
>> Kevin.
>>
>> ---
>> From 7137dc35798febc3ab6738921eab092ca5c4ac0e Mon Sep 17 00:00:00
>> 2001
>> From: Guinan Sun <guinanx.sun at intel.com>
>> Date: Thu, 31 Oct 2019 11:31:52 +0000
>> Subject: [PATCH] net/ixgbe: fix MACsec setting
>>
>> [ upstream commit 50556c88104cbc0096e90f454dc137258be2099f ]
>>
>> MACsec setting is not valid when port is stopped.
>> In order to make it valid, the patch changes the setting to where port is started.
>>
>> Fixes: 597f9fafe13b ("app/testpmd: convert to new Tx offloads API")
>>
>> Signed-off-by: Guinan Sun <guinanx.sun at intel.com>
>> Reviewed-by: Xiaolong Ye <xiaolong.ye at intel.com>
>> ---
>> drivers/net/ixgbe/ixgbe_ethdev.c | 149 ++++++++++++++++++++++++++++++
>> drivers/net/ixgbe/ixgbe_ethdev.h | 19 ++++
>> drivers/net/ixgbe/rte_pmd_ixgbe.c | 125 ++-----------------------
>> 3 files changed, 175 insertions(+), 118 deletions(-)
>>
>> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
>> index 74de2ff4e..1336236ba 100644
>> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
>> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>> @@ -2591,4 +2591,6 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
>> struct ixgbe_tm_conf *tm_conf =
>> IXGBE_DEV_PRIVATE_TO_TM_CONF(dev->data->dev_private);
>> + struct ixgbe_macsec_setting *macsec_ctrl =
>> + IXGBE_DEV_PRIVATE_TO_MACSEC_SETTING(dev->data-
>>> dev_private);
>>
>> PMD_INIT_FUNC_TRACE();
>> @@ -2831,4 +2833,7 @@ skip_link_setup:
>> ixgbe_dev_link_update(dev, 0);
>>
>> + /* setup the macsec ctrl register */
>> + ixgbe_dev_macsec_register_enable(dev, macsec_ctrl);
>> +
>> return 0;
>>
>> @@ -2859,4 +2864,7 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
>> PMD_INIT_FUNC_TRACE();
>>
>> + /* disable mecsec register */
>> + ixgbe_dev_macsec_register_disable(dev);
>> +
>> rte_eal_alarm_cancel(ixgbe_dev_setup_link_alarm_handler, dev);
>>
>> @@ -8679,4 +8687,145 @@ ixgbe_clear_all_l2_tn_filter(struct rte_eth_dev
>> *dev) }
>>
>> +void
>> +ixgbe_dev_macsec_setting_save(struct rte_eth_dev *dev,
>> + struct ixgbe_macsec_setting *macsec_setting)
>> {
>> + struct ixgbe_macsec_setting *macsec =
>> + IXGBE_DEV_PRIVATE_TO_MACSEC_SETTING(dev->data-
>>> dev_private);
>> +
>> + macsec->encrypt_en = macsec_setting->encrypt_en;
>> + macsec->replayprotect_en = macsec_setting->replayprotect_en; }
>> +
>> +void
>> +ixgbe_dev_macsec_setting_reset(struct rte_eth_dev *dev) {
>> + struct ixgbe_macsec_setting *macsec =
>> + IXGBE_DEV_PRIVATE_TO_MACSEC_SETTING(dev->data-
>>> dev_private);
>> +
>> + macsec->encrypt_en = 0;
>> + macsec->replayprotect_en = 0;
>> +}
>> +
>> +void
>> +ixgbe_dev_macsec_register_enable(struct rte_eth_dev *dev,
>> + struct ixgbe_macsec_setting *macsec_setting)
>> {
>> + struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
>>> dev_private);
>> + uint32_t ctrl;
>> + uint8_t en = macsec_setting->encrypt_en;
>> + uint8_t rp = macsec_setting->replayprotect_en;
>> +
>> + /**
>> + * Workaround:
>> + * As no ixgbe_disable_sec_rx_path equivalent is
>> + * implemented for tx in the base code, and we are
>> + * not allowed to modify the base code in DPDK, so
>> + * just call the hand-written one directly for now.
>> + * The hardware support has been checked by
>> + * ixgbe_disable_sec_rx_path().
>> + */
>> + ixgbe_disable_sec_tx_path_generic(hw);
>> +
>> + /* Enable Ethernet CRC (required by MACsec offload) */
>> + ctrl = IXGBE_READ_REG(hw, IXGBE_HLREG0);
>> + ctrl |= IXGBE_HLREG0_TXCRCEN | IXGBE_HLREG0_RXCRCSTRP;
>> + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, ctrl);
>> +
>> + /* Enable the TX and RX crypto engines */
>> + ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
>> + ctrl &= ~IXGBE_SECTXCTRL_SECTX_DIS;
>> + IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, ctrl);
>> +
>> + ctrl = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
>> + ctrl &= ~IXGBE_SECRXCTRL_SECRX_DIS;
>> + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, ctrl);
>> +
>> + ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
>> + ctrl &= ~IXGBE_SECTX_MINSECIFG_MASK;
>> + ctrl |= 0x3;
>> + IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, ctrl);
>> +
>> + /* Enable SA lookup */
>> + ctrl = IXGBE_READ_REG(hw, IXGBE_LSECTXCTRL);
>> + ctrl &= ~IXGBE_LSECTXCTRL_EN_MASK;
>> + ctrl |= en ? IXGBE_LSECTXCTRL_AUTH_ENCRYPT :
>> + IXGBE_LSECTXCTRL_AUTH;
>> + ctrl |= IXGBE_LSECTXCTRL_AISCI;
>> + ctrl &= ~IXGBE_LSECTXCTRL_PNTHRSH_MASK;
>> + ctrl |= IXGBE_MACSEC_PNTHRSH &
>> IXGBE_LSECTXCTRL_PNTHRSH_MASK;
>> + IXGBE_WRITE_REG(hw, IXGBE_LSECTXCTRL, ctrl);
>> +
>> + ctrl = IXGBE_READ_REG(hw, IXGBE_LSECRXCTRL);
>> + ctrl &= ~IXGBE_LSECRXCTRL_EN_MASK;
>> + ctrl |= IXGBE_LSECRXCTRL_STRICT << IXGBE_LSECRXCTRL_EN_SHIFT;
>> + ctrl &= ~IXGBE_LSECRXCTRL_PLSH;
>> + if (rp)
>> + ctrl |= IXGBE_LSECRXCTRL_RP;
>> + else
>> + ctrl &= ~IXGBE_LSECRXCTRL_RP;
>> + IXGBE_WRITE_REG(hw, IXGBE_LSECRXCTRL, ctrl);
>> +
>> + /* Start the data paths */
>> + ixgbe_enable_sec_rx_path(hw);
>> + /**
>> + * Workaround:
>> + * As no ixgbe_enable_sec_rx_path equivalent is
>> + * implemented for tx in the base code, and we are
>> + * not allowed to modify the base code in DPDK, so
>> + * just call the hand-written one directly for now.
>> + */
>> + ixgbe_enable_sec_tx_path_generic(hw);
>> +}
>> +
>> +void
>> +ixgbe_dev_macsec_register_disable(struct rte_eth_dev *dev) {
>> + struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
>>> dev_private);
>> + uint32_t ctrl;
>> +
>> + /**
>> + * Workaround:
>> + * As no ixgbe_disable_sec_rx_path equivalent is
>> + * implemented for tx in the base code, and we are
>> + * not allowed to modify the base code in DPDK, so
>> + * just call the hand-written one directly for now.
>> + * The hardware support has been checked by
>> + * ixgbe_disable_sec_rx_path().
>> + */
>> + ixgbe_disable_sec_tx_path_generic(hw);
>> +
>> + /* Disable the TX and RX crypto engines */
>> + ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
>> + ctrl |= IXGBE_SECTXCTRL_SECTX_DIS;
>> + IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, ctrl);
>> +
>> + ctrl = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
>> + ctrl |= IXGBE_SECRXCTRL_SECRX_DIS;
>> + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, ctrl);
>> +
>> + /* Disable SA lookup */
>> + ctrl = IXGBE_READ_REG(hw, IXGBE_LSECTXCTRL);
>> + ctrl &= ~IXGBE_LSECTXCTRL_EN_MASK;
>> + ctrl |= IXGBE_LSECTXCTRL_DISABLE;
>> + IXGBE_WRITE_REG(hw, IXGBE_LSECTXCTRL, ctrl);
>> +
>> + ctrl = IXGBE_READ_REG(hw, IXGBE_LSECRXCTRL);
>> + ctrl &= ~IXGBE_LSECRXCTRL_EN_MASK;
>> + ctrl |= IXGBE_LSECRXCTRL_DISABLE << IXGBE_LSECRXCTRL_EN_SHIFT;
>> + IXGBE_WRITE_REG(hw, IXGBE_LSECRXCTRL, ctrl);
>> +
>> + /* Start the data paths */
>> + ixgbe_enable_sec_rx_path(hw);
>> + /**
>> + * Workaround:
>> + * As no ixgbe_enable_sec_rx_path equivalent is
>> + * implemented for tx in the base code, and we are
>> + * not allowed to modify the base code in DPDK, so
>> + * just call the hand-written one directly for now.
>> + */
>> + ixgbe_enable_sec_tx_path_generic(hw);
>> +}
>> +
>> RTE_PMD_REGISTER_PCI(net_ixgbe, rte_ixgbe_pmd);
>> RTE_PMD_REGISTER_PCI_TABLE(net_ixgbe, pci_id_ixgbe_map); diff --git
>> a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
>> index 5023fa13f..418adfa3d 100644
>> --- a/drivers/net/ixgbe/ixgbe_ethdev.h
>> +++ b/drivers/net/ixgbe/ixgbe_ethdev.h
>> @@ -361,4 +361,9 @@ struct rte_flow {
>> };
>>
>> +struct ixgbe_macsec_setting {
>> + uint8_t encrypt_en;
>> + uint8_t replayprotect_en;
>> +};
>> +
>> /*
>> * Statistics counters collected by the MACsec @@ -467,4 +472,5 @@ struct
>> ixgbe_adapter {
>> struct ixgbe_hw_stats stats;
>> struct ixgbe_macsec_stats macsec_stats;
>> + struct ixgbe_macsec_setting macsec_setting;
>> struct ixgbe_hw_fdir_info fdir;
>> struct ixgbe_interrupt intr;
>> @@ -519,4 +525,7 @@ int ixgbe_vf_representor_uninit(struct rte_eth_dev
>> *ethdev);
>> (&((struct ixgbe_adapter *)adapter)->macsec_stats)
>>
>> +#define IXGBE_DEV_PRIVATE_TO_MACSEC_SETTING(adapter) \
>> + (&((struct ixgbe_adapter *)adapter)->macsec_setting)
>> +
>> #define IXGBE_DEV_PRIVATE_TO_INTR(adapter) \
>> (&((struct ixgbe_adapter *)adapter)->intr) @@ -737,4 +746,14 @@ int
>> ixgbe_config_rss_filter(struct rte_eth_dev *dev,
>> struct ixgbe_rte_flow_rss_conf *conf, bool add);
>>
>> +void ixgbe_dev_macsec_register_enable(struct rte_eth_dev *dev,
>> + struct ixgbe_macsec_setting *macsec_setting);
>> +
>> +void ixgbe_dev_macsec_register_disable(struct rte_eth_dev *dev);
>> +
>> +void ixgbe_dev_macsec_setting_save(struct rte_eth_dev *dev,
>> + struct ixgbe_macsec_setting *macsec_setting);
>> +
>> +void ixgbe_dev_macsec_setting_reset(struct rte_eth_dev *dev);
>> +
>> static inline int
>> ixgbe_ethertype_filter_lookup(struct ixgbe_filter_info *filter_info, diff --git
>> a/drivers/net/ixgbe/rte_pmd_ixgbe.c b/drivers/net/ixgbe/rte_pmd_ixgbe.c
>> index 3a874f9a9..49d538ef1 100644
>> --- a/drivers/net/ixgbe/rte_pmd_ixgbe.c
>> +++ b/drivers/net/ixgbe/rte_pmd_ixgbe.c
>> @@ -515,7 +515,6 @@ int
>> rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp) {
>> - struct ixgbe_hw *hw;
>> struct rte_eth_dev *dev;
>> - uint32_t ctrl;
>> + struct ixgbe_macsec_setting macsec_setting;
>>
>> RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV); @@ -523,72
>> +522,10 @@ rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t
>> rp)
>> dev = &rte_eth_devices[port];
>>
>> - if (!is_ixgbe_supported(dev))
>> - return -ENOTSUP;
>> + macsec_setting.encrypt_en = en;
>> + macsec_setting.replayprotect_en = rp;
>>
>> - hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>> + ixgbe_dev_macsec_setting_save(dev, &macsec_setting);
>>
>> - /* Stop the data paths */
>> - if (ixgbe_disable_sec_rx_path(hw) != IXGBE_SUCCESS)
>> - return -ENOTSUP;
>> - /**
>> - * Workaround:
>> - * As no ixgbe_disable_sec_rx_path equivalent is
>> - * implemented for tx in the base code, and we are
>> - * not allowed to modify the base code in DPDK, so
>> - * just call the hand-written one directly for now.
>> - * The hardware support has been checked by
>> - * ixgbe_disable_sec_rx_path().
>> - */
>> - ixgbe_disable_sec_tx_path_generic(hw);
>> -
>> - /* Enable Ethernet CRC (required by MACsec offload) */
>> - ctrl = IXGBE_READ_REG(hw, IXGBE_HLREG0);
>> - ctrl |= IXGBE_HLREG0_TXCRCEN | IXGBE_HLREG0_RXCRCSTRP;
>> - IXGBE_WRITE_REG(hw, IXGBE_HLREG0, ctrl);
>> -
>> - /* Enable the TX and RX crypto engines */
>> - ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
>> - ctrl &= ~IXGBE_SECTXCTRL_SECTX_DIS;
>> - IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, ctrl);
>> -
>> - ctrl = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
>> - ctrl &= ~IXGBE_SECRXCTRL_SECRX_DIS;
>> - IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, ctrl);
>> -
>> - ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
>> - ctrl &= ~IXGBE_SECTX_MINSECIFG_MASK;
>> - ctrl |= 0x3;
>> - IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, ctrl);
>> -
>> - /* Enable SA lookup */
>> - ctrl = IXGBE_READ_REG(hw, IXGBE_LSECTXCTRL);
>> - ctrl &= ~IXGBE_LSECTXCTRL_EN_MASK;
>> - ctrl |= en ? IXGBE_LSECTXCTRL_AUTH_ENCRYPT :
>> - IXGBE_LSECTXCTRL_AUTH;
>> - ctrl |= IXGBE_LSECTXCTRL_AISCI;
>> - ctrl &= ~IXGBE_LSECTXCTRL_PNTHRSH_MASK;
>> - ctrl |= IXGBE_MACSEC_PNTHRSH &
>> IXGBE_LSECTXCTRL_PNTHRSH_MASK;
>> - IXGBE_WRITE_REG(hw, IXGBE_LSECTXCTRL, ctrl);
>> -
>> - ctrl = IXGBE_READ_REG(hw, IXGBE_LSECRXCTRL);
>> - ctrl &= ~IXGBE_LSECRXCTRL_EN_MASK;
>> - ctrl |= IXGBE_LSECRXCTRL_STRICT << IXGBE_LSECRXCTRL_EN_SHIFT;
>> - ctrl &= ~IXGBE_LSECRXCTRL_PLSH;
>> - if (rp)
>> - ctrl |= IXGBE_LSECRXCTRL_RP;
>> - else
>> - ctrl &= ~IXGBE_LSECRXCTRL_RP;
>> - IXGBE_WRITE_REG(hw, IXGBE_LSECRXCTRL, ctrl);
>> -
>> - /* Start the data paths */
>> - ixgbe_enable_sec_rx_path(hw);
>> - /**
>> - * Workaround:
>> - * As no ixgbe_enable_sec_rx_path equivalent is
>> - * implemented for tx in the base code, and we are
>> - * not allowed to modify the base code in DPDK, so
>> - * just call the hand-written one directly for now.
>> - */
>> - ixgbe_enable_sec_tx_path_generic(hw);
>> + ixgbe_dev_macsec_register_enable(dev, &macsec_setting);
>>
>> return 0;
>> @@ -598,7 +535,5 @@ int
>> rte_pmd_ixgbe_macsec_disable(uint16_t port) {
>> - struct ixgbe_hw *hw;
>> struct rte_eth_dev *dev;
>> - uint32_t ctrl;
>>
>> RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV); @@ -606,53
>> +541,7 @@ rte_pmd_ixgbe_macsec_disable(uint16_t port)
>> dev = &rte_eth_devices[port];
>>
>> - if (!is_ixgbe_supported(dev))
>> - return -ENOTSUP;
>> + ixgbe_dev_macsec_setting_reset(dev);
>>
>> - hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>> -
>> - /* Stop the data paths */
>> - if (ixgbe_disable_sec_rx_path(hw) != IXGBE_SUCCESS)
>> - return -ENOTSUP;
>> - /**
>> - * Workaround:
>> - * As no ixgbe_disable_sec_rx_path equivalent is
>> - * implemented for tx in the base code, and we are
>> - * not allowed to modify the base code in DPDK, so
>> - * just call the hand-written one directly for now.
>> - * The hardware support has been checked by
>> - * ixgbe_disable_sec_rx_path().
>> - */
>> - ixgbe_disable_sec_tx_path_generic(hw);
>> -
>> - /* Disable the TX and RX crypto engines */
>> - ctrl = IXGBE_READ_REG(hw, IXGBE_SECTXCTRL);
>> - ctrl |= IXGBE_SECTXCTRL_SECTX_DIS;
>> - IXGBE_WRITE_REG(hw, IXGBE_SECTXCTRL, ctrl);
>> -
>> - ctrl = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
>> - ctrl |= IXGBE_SECRXCTRL_SECRX_DIS;
>> - IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, ctrl);
>> -
>> - /* Disable SA lookup */
>> - ctrl = IXGBE_READ_REG(hw, IXGBE_LSECTXCTRL);
>> - ctrl &= ~IXGBE_LSECTXCTRL_EN_MASK;
>> - ctrl |= IXGBE_LSECTXCTRL_DISABLE;
>> - IXGBE_WRITE_REG(hw, IXGBE_LSECTXCTRL, ctrl);
>> -
>> - ctrl = IXGBE_READ_REG(hw, IXGBE_LSECRXCTRL);
>> - ctrl &= ~IXGBE_LSECRXCTRL_EN_MASK;
>> - ctrl |= IXGBE_LSECRXCTRL_DISABLE << IXGBE_LSECRXCTRL_EN_SHIFT;
>> - IXGBE_WRITE_REG(hw, IXGBE_LSECRXCTRL, ctrl);
>> -
>> - /* Start the data paths */
>> - ixgbe_enable_sec_rx_path(hw);
>> - /**
>> - * Workaround:
>> - * As no ixgbe_enable_sec_rx_path equivalent is
>> - * implemented for tx in the base code, and we are
>> - * not allowed to modify the base code in DPDK, so
>> - * just call the hand-written one directly for now.
>> - */
>> - ixgbe_enable_sec_tx_path_generic(hw);
>> + ixgbe_dev_macsec_register_disable(dev);
>>
>> return 0;
>> --
>> 2.21.0
>>
>> ---
>> Diff of the applied patch vs upstream commit (please double-check if non-
>> empty:
>> ---
>> --- - 2019-12-11 21:24:13.077637869 +0000
>> +++ 0004-net-ixgbe-fix-MACsec-setting.patch 2019-12-11
>> 21:24:12.552653594 +0000
>> @@ -1 +1 @@
>> -From 50556c88104cbc0096e90f454dc137258be2099f Mon Sep 17 00:00:00
>> 2001
>> +From 7137dc35798febc3ab6738921eab092ca5c4ac0e Mon Sep 17 00:00:00
>> 2001
>> @@ -5,0 +6,2 @@
>> +[ upstream commit 50556c88104cbc0096e90f454dc137258be2099f ]
>> +
>> @@ -11 +12,0 @@
>> -Cc: stable at dpdk.org
>> @@ -22 +23 @@
>> -index 3c7624f3a..06414d110 100644
>> +index 74de2ff4e..1336236ba 100644
>> @@ -25 +26 @@
>> -@@ -2543,4 +2543,6 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
>> +@@ -2591,4 +2591,6 @@ ixgbe_dev_start(struct rte_eth_dev *dev)
>> @@ -32 +33 @@
>> -@@ -2795,4 +2797,7 @@ skip_link_setup:
>> +@@ -2831,4 +2833,7 @@ skip_link_setup:
>> @@ -40 +41 @@
>> -@@ -2826,4 +2831,7 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
>> +@@ -2859,4 +2864,7 @@ ixgbe_dev_stop(struct rte_eth_dev *dev)
>> @@ -48 +49 @@
>> -@@ -8817,4 +8825,145 @@ ixgbe_clear_all_l2_tn_filter(struct rte_eth_dev
>> *dev)
>> +@@ -8679,4 +8687,145 @@ ixgbe_clear_all_l2_tn_filter(struct rte_eth_dev
>> +*dev)
>> @@ -195 +196 @@
>> -index 6e9ed2e10..5da6923a1 100644
>> +index 5023fa13f..418adfa3d 100644
>> @@ -198 +199 @@
>> -@@ -366,4 +366,9 @@ struct rte_flow {
>> +@@ -361,4 +361,9 @@ struct rte_flow {
>> @@ -208 +209 @@
>> -@@ -472,4 +477,5 @@ struct ixgbe_adapter {
>> +@@ -467,4 +472,5 @@ struct ixgbe_adapter {
>> @@ -214 +215 @@
>> -@@ -524,4 +530,7 @@ int ixgbe_vf_representor_uninit(struct rte_eth_dev
>> *ethdev);
>> +@@ -519,4 +525,7 @@ int ixgbe_vf_representor_uninit(struct rte_eth_dev
>> +*ethdev);
>> @@ -222 +223 @@
>> -@@ -742,4 +751,14 @@ int ixgbe_config_rss_filter(struct rte_eth_dev *dev,
>> +@@ -737,4 +746,14 @@ int ixgbe_config_rss_filter(struct rte_eth_dev
>> +*dev,
>> @@ -238 +239 @@
>> -index 9514f2cf5..073fe1e23 100644
>> +index 3a874f9a9..49d538ef1 100644
>> @@ -241 +242 @@
>> -@@ -516,7 +516,6 @@ int
>> +@@ -515,7 +515,6 @@ int
>> @@ -250 +251 @@
>> -@@ -524,72 +523,10 @@ rte_pmd_ixgbe_macsec_enable(uint16_t port,
>> uint8_t en, uint8_t rp)
>> +@@ -523,72 +522,10 @@ rte_pmd_ixgbe_macsec_enable(uint16_t port,
>> +uint8_t en, uint8_t rp)
>> @@ -327 +328 @@
>> -@@ -599,7 +536,5 @@ int
>> +@@ -598,7 +535,5 @@ int
>> @@ -335 +336 @@
>> -@@ -607,53 +542,7 @@ rte_pmd_ixgbe_macsec_disable(uint16_t port)
>> +@@ -606,53 +541,7 @@ rte_pmd_ixgbe_macsec_disable(uint16_t port)
>
More information about the stable
mailing list