[dpdk-stable] [PATCH 19.11 1/2] net/bnxt: support speed capabilities query

[Luca Boccassi]

On Wed, 2020-08-12 at 09:22 +0530, Kalesh A P wrote:
> From: Kalesh AP <kalesh-anakkur.purayil at broadcom.com>
> 
> [ upstream commit 85cf7f2bba0f665fe91710cd1cf0ca852f73890a ]
> 
> Added information about supported speeds for the port in the
> "dev_infos_get". As other PMDs are returning the speed capabilities,
> apps may expect this behavior from bnxt PMD.
> 
> Signed-off-by: Kalesh AP <kalesh-anakkur.purayil at broadcom.com>
> Reviewed-by: Ajit Khaparde <ajit.khaparde at broadcom.com>
> ---
>  drivers/net/bnxt/bnxt_ethdev.c | 36 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
> index fe240b6..90e1a33 100644
> --- a/drivers/net/bnxt/bnxt_ethdev.c
> +++ b/drivers/net/bnxt/bnxt_ethdev.c
> @@ -490,6 +490,40 @@ static int bnxt_shutdown_nic(struct bnxt *bp)
>   * Device configuration and status function
>   */
>  
> +static uint32_t bnxt_get_speed_capabilities(struct bnxt *bp)
> +{
> +	uint32_t link_speed = bp->link_info.support_speeds;
> +	uint32_t speed_capa = 0;
> +
> +	if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB)
> +		speed_capa |= ETH_LINK_SPEED_100M;
> +	if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD)
> +		speed_capa |= ETH_LINK_SPEED_100M_HD;
> +	if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB)
> +		speed_capa |= ETH_LINK_SPEED_1G;
> +	if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB)
> +		speed_capa |= ETH_LINK_SPEED_2_5G;
> +	if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB)
> +		speed_capa |= ETH_LINK_SPEED_10G;
> +	if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB)
> +		speed_capa |= ETH_LINK_SPEED_20G;
> +	if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB)
> +		speed_capa |= ETH_LINK_SPEED_25G;
> +	if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB)
> +		speed_capa |= ETH_LINK_SPEED_40G;
> +	if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB)
> +		speed_capa |= ETH_LINK_SPEED_50G;
> +	if (link_speed & HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB)
> +		speed_capa |= ETH_LINK_SPEED_100G;
> +
> +	if (bp->link_info.auto_mode == HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE)
> +		speed_capa |= ETH_LINK_SPEED_FIXED;
> +	else
> +		speed_capa |= ETH_LINK_SPEED_AUTONEG;
> +
> +	return speed_capa;
> +}
> +
>  static int bnxt_dev_info_get_op(struct rte_eth_dev *eth_dev,
>  				struct rte_eth_dev_info *dev_info)
>  {
> @@ -533,6 +567,8 @@ static int bnxt_dev_info_get_op(struct rte_eth_dev *eth_dev,
>  	dev_info->tx_offload_capa = BNXT_DEV_TX_OFFLOAD_SUPPORT;
>  	dev_info->flow_type_rss_offloads = BNXT_ETH_RSS_SUPPORT;
>  
> +	dev_info->speed_capa = bnxt_get_speed_capabilities(bp);
> +
>  	/* *INDENT-OFF* */
>  	dev_info->default_rxconf = (struct rte_eth_rxconf) {
>  		.rx_thresh = {

Hi,

This smells like a feature? 20.02 does not have it, so what happens if
a user expects this to work and upgrades from 19.11.x to 20.02?

-- 
Kind regards,
Luca Boccassi