[dpdk-stable] patch 'test: fix build with ring PMD but no bond PMD' has been queued to stable release 19.11.4

luca.boccassi at gmail.com luca.boccassi at gmail.com
Fri Jul 24 13:58:30 CEST 2020


Hi,

FYI, your patch has been queued to stable release 19.11.4

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 07/26/20. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Thanks.

Luca Boccassi

---
>From ff89fb4fe754c59fa09d32a5874367638b32ba20 Mon Sep 17 00:00:00 2001
From: Bruce Richardson <bruce.richardson at intel.com>
Date: Wed, 27 May 2020 15:57:45 +0100
Subject: [PATCH] test: fix build with ring PMD but no bond PMD

[ upstream commit 949c97ae310af049075c8745208e8795b9071d9c ]

If the bonding pmd is disabled, all autotest associated with it should be
disabled. However, some of those tests also depended upon the ring PMD so
were placed in a block depending on that driver - and unfortunately that
driver alone. This caused build failures if the ring PMD was enabled but
the bonding PMD disabled, due to missing header files and driver libs.

This error can be reproduced by configuring DPDK using e.g.

  meson configure -Ddisable_drivers=net/[!r]* build

(which will disable all drivers not starting with "r"), and then building
using ninja.

Fix this by moving all link bonding autotests to the one block and putting
a second conditional check within that block for those also requiring the
ring PMD.

Fixes: 7f6ef1664027 ("test/bonding: allow disabling driver")
Fixes: 207b1c813f39 ("test: fix build without ring PMD")

Signed-off-by: Bruce Richardson <bruce.richardson at intel.com>
Reviewed-by: David Marchand <david.marchand at redhat.com>
---
 app/test/meson.build | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/app/test/meson.build b/app/test/meson.build
index 8524a986a..d7d0e7871 100644
--- a/app/test/meson.build
+++ b/app/test/meson.build
@@ -322,6 +322,10 @@ endif
 # they are used via a driver-specific API.
 if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
 	test_deps += 'pmd_bond'
+	if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
+		test_sources += 'test_link_bonding_mode4.c'
+		driver_test_names += 'link_bonding_mode4_autotest'
+	endif
 endif
 if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
 	test_deps += 'pmd_ring'
@@ -330,7 +334,6 @@ if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
 	test_sources += 'test_event_eth_tx_adapter.c'
 	test_sources += 'test_bitratestats.c'
 	test_sources += 'test_latencystats.c'
-	test_sources += 'test_link_bonding_mode4.c'
 	test_sources += 'sample_packet_forward.c'
 	test_sources += 'test_pdump.c'
 	fast_test_names += 'ring_pmd_autotest'
@@ -338,7 +341,6 @@ if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
 	fast_test_names += 'event_eth_tx_adapter_autotest'
 	fast_test_names += 'bitratestats_autotest'
 	fast_test_names += 'latencystats_autotest'
-	driver_test_names += 'link_bonding_mode4_autotest'
 	fast_test_names += 'pdump_autotest'
 endif
 
-- 
2.20.1

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2020-07-24 12:53:51.360596281 +0100
+++ 0072-test-fix-build-with-ring-PMD-but-no-bond-PMD.patch	2020-07-24 12:53:48.295006608 +0100
@@ -1,8 +1,10 @@
-From 949c97ae310af049075c8745208e8795b9071d9c Mon Sep 17 00:00:00 2001
+From ff89fb4fe754c59fa09d32a5874367638b32ba20 Mon Sep 17 00:00:00 2001
 From: Bruce Richardson <bruce.richardson at intel.com>
 Date: Wed, 27 May 2020 15:57:45 +0100
 Subject: [PATCH] test: fix build with ring PMD but no bond PMD
 
+[ upstream commit 949c97ae310af049075c8745208e8795b9071d9c ]
+
 If the bonding pmd is disabled, all autotest associated with it should be
 disabled. However, some of those tests also depended upon the ring PMD so
 were placed in a block depending on that driver - and unfortunately that
@@ -30,13 +32,13 @@
  1 file changed, 4 insertions(+), 2 deletions(-)
 
 diff --git a/app/test/meson.build b/app/test/meson.build
-index 5233ead46..10f23d53b 100644
+index 8524a986a..d7d0e7871 100644
 --- a/app/test/meson.build
 +++ b/app/test/meson.build
-@@ -352,6 +352,10 @@ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
+@@ -322,6 +322,10 @@ endif
+ # they are used via a driver-specific API.
+ if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
  	test_deps += 'pmd_bond'
- 	test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c']
- 	driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest']
 +	if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
 +		test_sources += 'test_link_bonding_mode4.c'
 +		driver_test_names += 'link_bonding_mode4_autotest'
@@ -44,20 +46,20 @@
  endif
  if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
  	test_deps += 'pmd_ring'
-@@ -360,7 +364,6 @@ if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
+@@ -330,7 +334,6 @@ if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
  	test_sources += 'test_event_eth_tx_adapter.c'
  	test_sources += 'test_bitratestats.c'
  	test_sources += 'test_latencystats.c'
 -	test_sources += 'test_link_bonding_mode4.c'
  	test_sources += 'sample_packet_forward.c'
  	test_sources += 'test_pdump.c'
- 	fast_tests += [['ring_pmd_autotest', true]]
-@@ -368,7 +371,6 @@ if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
- 	fast_tests += [['event_eth_tx_adapter_autotest', false]]
- 	fast_tests += [['bitratestats_autotest', true]]
- 	fast_tests += [['latencystats_autotest', true]]
+ 	fast_test_names += 'ring_pmd_autotest'
+@@ -338,7 +341,6 @@ if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
+ 	fast_test_names += 'event_eth_tx_adapter_autotest'
+ 	fast_test_names += 'bitratestats_autotest'
+ 	fast_test_names += 'latencystats_autotest'
 -	driver_test_names += 'link_bonding_mode4_autotest'
- 	fast_tests += [['pdump_autotest', true]]
+ 	fast_test_names += 'pdump_autotest'
  endif
  
 -- 


More information about the stable mailing list