[dpdk-stable] [PATCH] app/testpmd: fix CPU cycles per pkt stats on transmit modes
Honnappa Nagarahalli
Honnappa.Nagarahalli at arm.com
Thu Jun 18 21:28:52 CEST 2020
<snip>
> Subject: [PATCH] app/testpmd: fix CPU cycles per pkt stats on transmit modes
>
> In txonly and flowgen forwarding mode, calculating CPU per packets with total
> received packets is not accurate. Use total transmitted packets for these cases.
>
> The error output under txonly mode:
> testpmd> show fwd stats all
>
> ---------------------- Forward statistics for port 0 -------------------
> RX-packets: 0 RX-dropped: 0 RX-total: 0
> TX-packets: 3582891927 TX-dropped: 401965824 TX-total: 3984857751
> TX-bursts : 86381636 [0% of 0 pkts + 85% of 64 pkts + 15% of 32 pkts]
> -------------------------------------------------------------------------
>
> ---------------------- Forward statistics for port 1 -------------------
> RX-packets: 1 RX-dropped: 394351696 RX-total: 394351697
> TX-packets: 3582890632 TX-dropped: 401965568 TX-total: 3984856200
> TX-bursts : 86381679 [0% of 0 pkts + 85% of 64 pkts + 15% of 32 pkts]
> -------------------------------------------------------------------------
>
> +++++++++++++++ Accumulated forward statistics for all
> +++++++++++++++ ports+++++++++++++
> RX-packets: 1 RX-dropped: 394351696 RX-total: 394351697
> TX-packets: 7165782559 TX-dropped: 803931392 TX-total: 7969713951
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> ++++++++
>
> CPU cycles/packet=54984156291.00 \
> (total cycles=54984156291 / total RX packets=1) at 200 MHz Clock
>
> Signed-off-by: Phil Yang <phil.yang at arm.com>
> Reviewed-by: Ruifeng Wang <ruifeng.wang at arm.com>
> Fixes: 53324971a14e ("app/testpmd: display/clear forwarding stats on
> demand")
> Cc: stable at dpdk.org
> Cc: david.marchand at redhat.com
> ---
> app/test-pmd/testpmd.c | 24 +++++++++++++++++-------
> 1 file changed, 17 insertions(+), 7 deletions(-)
>
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index
> 4989d22..798b8e0 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -1961,13 +1961,23 @@ fwd_stats_display(void)
> acc_stats_border, acc_stats_border); #ifdef
> RTE_TEST_PMD_RECORD_CORE_CYCLES #define CYC_PER_MHZ 1E6
> - if (total_recv > 0)
> - printf("\n CPU cycles/packet=%.2F (total cycles="
> - "%"PRIu64" / total RX packets=%"PRIu64") at %"PRIu64
> - " MHz Clock\n",
> - (double) fwd_cycles / total_recv,
> - fwd_cycles, total_recv,
> - (uint64_t)(rte_get_tsc_hz() / CYC_PER_MHZ));
> + if (total_recv > 0 || total_xmit > 0) {
> + if (strcmp(cur_fwd_eng->fwd_mode_name, "txonly") == 0 ||
> + strcmp(cur_fwd_eng->fwd_mode_name, "flowgen") == 0)
> + printf("\n CPU cycles/packet=%.2F (total cycles="
> + "%"PRIu64" / total %s packets=%"PRIu64") at %"
> + PRIu64" MHz Clock\n",
> + (double) fwd_cycles / total_xmit,
> + fwd_cycles, cur_fwd_eng->fwd_mode_name,
> total_xmit,
> + (uint64_t)(rte_get_tsc_hz() / CYC_PER_MHZ));
> + else
> + printf("\n CPU cycles/packet=%.2F (total cycles="
> + "%"PRIu64" / total %s packets=%"PRIu64") at %"
> + PRIu64" MHz Clock\n",
> + (double) fwd_cycles / total_recv,
> + fwd_cycles, cur_fwd_eng->fwd_mode_name,
> total_recv,
> + (uint64_t)(rte_get_tsc_hz() / CYC_PER_MHZ));
> + }
nit. Only difference between the two 'printf' calls are total_recv vs total_xmit. Can be consolidated into a single printf.
> #endif
> }
>
> --
> 2.7.4
More information about the stable
mailing list