[dpdk-stable] [dpdk-dev] [PATCH] net/ixgbe: fix link status inconsistencies
Ye Xiaolong
xiaolong.ye at intel.com
Sun Mar 29 06:14:32 CEST 2020
On 02/26, taox.zhu at intel.com wrote:
>From: Zhu Tao <taox.zhu at intel.com>
>
>Setting LINK UP or LINK DOWN is divided into two parts, with
>the main task done in a separate thread, which can take up
>to 9 seconds. If cancel the thread in execution, may cause state
>inconsistencies. Therefore, must wait for the previous setting
>to exit normally before setting the new state.
>
>Note: before using threads, use alarm to handle main tasks.
>When canceling alarm, the execution of alarm will not be interrupted.
>
>Fixes: 819d0d1d57 ("net/ixgbe: fix blocking system events")
>Cc: stable at dpdk.org
>
>Signed-off-by: Zhu Tao <taox.zhu at intel.com>
>---
> drivers/net/ixgbe/ixgbe_ethdev.c | 24 ++++++++++++++++++++++--
> 1 file changed, 22 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
>index 23b3f5b0c..2c5797635 100644
>--- a/drivers/net/ixgbe/ixgbe_ethdev.c
>+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
>@@ -4143,16 +4143,35 @@ ixgbevf_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
> return ret_val;
> }
>
>+/* return 1: setup complete, return 0: setup not complete, and wait timeout*/
>+static int
>+ixgbe_dev_wait_setup_link_complete(struct rte_eth_dev *dev)
>+{
>+#define DELAY_INTERVAL 100 /* 100ms */
>+#define MAX_TIMEOUT 90 /* 9s (90 * 100ms) in total */
>+ struct ixgbe_adapter *ad = dev->data->dev_private;
>+ int timeout = MAX_TIMEOUT;
>+
>+ while (rte_atomic32_read(&ad->link_thread_running) && timeout) {
>+ msec_delay(DELAY_INTERVAL);
>+ timeout--;
>+ }
>+
>+
>+ return !!timeout;
>+}
>+
> static void
> ixgbe_dev_cancel_link_thread(struct rte_eth_dev *dev)
> {
> struct ixgbe_adapter *ad = dev->data->dev_private;
> void *retval;
>
>- if (rte_atomic32_read(&ad->link_thread_running)) {
>+ if (!ixgbe_dev_wait_setup_link_complete(dev)) {
> pthread_cancel(ad->link_thread_tid);
> pthread_join(ad->link_thread_tid, &retval);
> rte_atomic32_clear(&ad->link_thread_running);
>+ PMD_DRV_LOG(ERR, "Link thread not complete, cancel it!");
> }
> }
>
>@@ -4263,7 +4282,8 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
> if (link_up == 0) {
> if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
> intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
>- if (rte_atomic32_test_and_set(&ad->link_thread_running)) {
>+ if (ixgbe_dev_wait_setup_link_complete(dev) &&
>+ rte_atomic32_test_and_set(&ad->link_thread_running)) {
> if (rte_ctrl_thread_create(&ad->link_thread_tid,
> "ixgbe-link-handler",
> NULL,
>--
>2.17.1
>
Acked-by: Xiaolong Ye <xiaolong.ye at intel.com>
Applied to dpdk-next-net-intel, Thanks.
More information about the stable
mailing list