[dpdk-stable] patch 'net/dpaa: use dynamic log type' has been queued to stable release 19.11.3

[luca.boccassi at gmail.com]

Hi,

FYI, your patch has been queued to stable release 19.11.3

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 05/21/20. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Thanks.

Luca Boccassi

---
>From 3e0d3b1204c39870f13a74db6c19e6778a74b6a4 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <stephen at networkplumber.org>
Date: Mon, 30 Mar 2020 21:41:55 -0700
Subject: [PATCH] net/dpaa: use dynamic log type

[ upstream commit b7c7ff6e3b34ac088237f85cf4ac5cc30c859a18 ]

The static PMD logtype should not be used by drivers.
Instead, use existing log macros in this driver.

Also use standard rte_ether routine to format ether address.

Fixes: 37f9b54bd3cf ("net/dpaa: support Tx and Rx queue setup")

Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit at intel.com>
---
 drivers/net/dpaa/dpaa_ethdev.c | 23 ++++++++---------------
 1 file changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/net/dpaa/dpaa_ethdev.c b/drivers/net/dpaa/dpaa_ethdev.c
index fce9ce2feb..5f81968d80 100644
--- a/drivers/net/dpaa/dpaa_ethdev.c
+++ b/drivers/net/dpaa/dpaa_ethdev.c
@@ -881,8 +881,8 @@ dpaa_dev_rx_queue_count(struct rte_eth_dev *dev, uint16_t rx_queue_id)
 	PMD_INIT_FUNC_TRACE();
 
 	if (qman_query_fq_frm_cnt(rxq, &frm_cnt) == 0) {
-		RTE_LOG(DEBUG, PMD, "RX frame count for q(%d) is %u\n",
-			rx_queue_id, frm_cnt);
+		DPAA_PMD_DEBUG("RX frame count for q(%d) is %u",
+			       rx_queue_id, frm_cnt);
 	}
 	return frm_cnt;
 }
@@ -996,8 +996,7 @@ dpaa_dev_add_mac_addr(struct rte_eth_dev *dev,
 	ret = fman_if_add_mac_addr(dpaa_intf->fif, addr->addr_bytes, index);
 
 	if (ret)
-		RTE_LOG(ERR, PMD, "error: Adding the MAC ADDR failed:"
-			" err = %d", ret);
+		DPAA_PMD_ERR("Adding the MAC ADDR failed: err = %d", ret);
 	return 0;
 }
 
@@ -1023,7 +1022,7 @@ dpaa_dev_set_mac_addr(struct rte_eth_dev *dev,
 
 	ret = fman_if_add_mac_addr(dpaa_intf->fif, addr->addr_bytes, 0);
 	if (ret)
-		RTE_LOG(ERR, PMD, "error: Setting the MAC ADDR failed %d", ret);
+		DPAA_PMD_ERR("Setting the MAC ADDR failed %d", ret);
 
 	return ret;
 }
@@ -1306,6 +1305,7 @@ dpaa_dev_init(struct rte_eth_dev *eth_dev)
 	struct fman_if *fman_intf;
 	struct fman_if_bpool *bp, *tmp_bp;
 	uint32_t cgrid[DPAA_MAX_NUM_PCD_QUEUES];
+	char eth_buf[RTE_ETHER_ADDR_FMT_SIZE];
 
 	PMD_INIT_FUNC_TRACE();
 
@@ -1457,15 +1457,9 @@ dpaa_dev_init(struct rte_eth_dev *eth_dev)
 
 	/* copy the primary mac address */
 	rte_ether_addr_copy(&fman_intf->mac_addr, &eth_dev->data->mac_addrs[0]);
+	rte_ether_format_addr(eth_buf, sizeof(eth_buf), &fman_intf->mac_addr);
 
-	RTE_LOG(INFO, PMD, "net: dpaa: %s: %02x:%02x:%02x:%02x:%02x:%02x\n",
-		dpaa_device->name,
-		fman_intf->mac_addr.addr_bytes[0],
-		fman_intf->mac_addr.addr_bytes[1],
-		fman_intf->mac_addr.addr_bytes[2],
-		fman_intf->mac_addr.addr_bytes[3],
-		fman_intf->mac_addr.addr_bytes[4],
-		fman_intf->mac_addr.addr_bytes[5]);
+	DPAA_PMD_INFO("net: dpaa: %s: %s", dpaa_device->name, eth_buf);
 
 	/* Disable RX mode */
 	fman_if_discard_rx_errors(fman_intf);
@@ -1578,8 +1572,7 @@ rte_dpaa_probe(struct rte_dpaa_driver *dpaa_drv __rte_unused,
 
 	if (!is_global_init && (rte_eal_process_type() == RTE_PROC_PRIMARY)) {
 		if (access("/tmp/fmc.bin", F_OK) == -1) {
-			RTE_LOG(INFO, PMD,
-				"* FMC not configured.Enabling default mode\n");
+			DPAA_PMD_INFO("* FMC not configured.Enabling default mode");
 			default_q = 1;
 		}
 
-- 
2.20.1

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2020-05-19 14:04:45.864418507 +0100
+++ 0031-net-dpaa-use-dynamic-log-type.patch	2020-05-19 14:04:44.168647502 +0100
@@ -1,15 +1,16 @@
-From b7c7ff6e3b34ac088237f85cf4ac5cc30c859a18 Mon Sep 17 00:00:00 2001
+From 3e0d3b1204c39870f13a74db6c19e6778a74b6a4 Mon Sep 17 00:00:00 2001
 From: Stephen Hemminger <stephen at networkplumber.org>
 Date: Mon, 30 Mar 2020 21:41:55 -0700
 Subject: [PATCH] net/dpaa: use dynamic log type
 
+[ upstream commit b7c7ff6e3b34ac088237f85cf4ac5cc30c859a18 ]
+
 The static PMD logtype should not be used by drivers.
 Instead, use existing log macros in this driver.
 
 Also use standard rte_ether routine to format ether address.
 
 Fixes: 37f9b54bd3cf ("net/dpaa: support Tx and Rx queue setup")
-Cc: stable at dpdk.org
 
 Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
 Reviewed-by: Ferruh Yigit <ferruh.yigit at intel.com>