[PATCH] net/i40e: fix max frmame size config at port level

[wenxuanx.wu at intel.com]

From: Wenxuan Wu <wenxuanx.wu at intel.com>

Previously, max frame size can only be set when link is up, and the wait
time is 1 sec. But for nic media type of I40E_10G_BASET would consume longer
time which is too short to up would result in error.

Acctually, max frame size of media type I40E_MEDIA_TYPE_BASET can be set
regardless of link status.

This patch omit the status check of 10G_MEDIA_TYPE_BASET.

Fixes: a4ba77367923 ("net/i40e: enable maximum frame size at port level")
Cc: stable at dpdk.org

Signed-off-by: Wenxuan Wu <wenxuanx.wu at intel.com>
---
 drivers/net/i40e/i40e_ethdev.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 755786dc10..5762cd526a 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -12102,23 +12102,21 @@ i40e_set_mac_max_frame(struct rte_eth_dev *dev, uint16_t size)
 	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	uint32_t rep_cnt = MAX_REPEAT_TIME;
 	struct rte_eth_link link;
-	enum i40e_status_code status;
+	enum i40e_status_code status = I40E_ERR_DEVICE_NOT_SUPPORTED;
 
 	do {
 		update_link_reg(hw, &link);
 		if (link.link_status)
 			break;
-
 		rte_delay_ms(CHECK_INTERVAL);
 	} while (--rep_cnt);
 
-	if (link.link_status) {
+	/* Only I40E_MEDIA_TYPE_FIBER link up should be guaranteed */
+	if (hw->phy.media_type == I40E_MEDIA_TYPE_BASET || link.link_status)
 		status = i40e_aq_set_mac_config(hw, size, TRUE, 0, false, NULL);
-		if (status != I40E_SUCCESS)
-			PMD_DRV_LOG(ERR, "Failed to set max frame size at port level");
-	} else {
-		PMD_DRV_LOG(ERR, "Set max frame size at port level not applicable on link down");
-	}
+
+	if (status != I40E_SUCCESS)
+		PMD_DRV_LOG(ERR, "Failed to set max frame size at port level");
 }
 
 RTE_LOG_REGISTER_SUFFIX(i40e_logtype_init, init, NOTICE);
-- 
2.25.1