[PATCH] app/testpmd: skip stopped queues when forwarding
Singh, Aman Deep
aman.deep.singh at intel.com
Thu Feb 3 14:52:00 CET 2022
Hi Dmitry,
Thanks for the patch.
On 1/13/2022 2:51 PM, Dmitry Kozlyuk wrote:
> After "port <port_id> rxq|txq <queue_id> stop"
> the stopped queue was used in forwarding nonetheless,
> which may cause undefined behavior in the PMD.
>
> Record the configured queue state
> and account for it when launching forwarding as follows:
> +--------+---------+-----------------+---------------+
> |RxQ |TxQ |Configured mode |Launch routine |
> +--------+---------+-----------------+---------------+
> |stopped |stopped |* |- |
> |stopped |started |txonly |(configured) |
> |stopped |started |* |- |
> |started |stopped |* |rxonly |
> |started |started |* |(configured) |
> +--------+---------+-----------------+---------------+
> Display stopped queues on "show port config rxtx".
>
> Fixes: 5f4ec54f1d16 ("testpmd: queue start and stop")
> Cc: jing.d.chen at intel.com
> Cc: stable at dpdk.org
>
> Signed-off-by: Dmitry Kozlyuk <dkozlyuk at nvidia.com>
> Reviewed-by: Raslan Darawsheh <rasland at nvidia.com>
> ---
> app/test-pmd/cmdline.c | 8 ++++++++
> app/test-pmd/config.c | 6 ++++++
> app/test-pmd/testpmd.c | 18 ++++++++++++++++--
> app/test-pmd/testpmd.h | 10 ++++++++++
> 4 files changed, 40 insertions(+), 2 deletions(-)
>
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index e626b1c7d9..8b0920e23d 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -2702,6 +2702,14 @@ cmd_config_rxtx_queue_parsed(void *parsed_result,
>
> if (ret == -ENOTSUP)
> fprintf(stderr, "Function not supported in PMD\n");
> + if (ret == 0) {
> + struct rte_port *port;
> + struct queue_state *states;
> +
> + port = &ports[res->portid];
> + states = isrx ? port->rxq_state : port->txq_state;
> + states[res->qid].stopped = !isstart;
> + }
> }
>
> cmdline_parse_token_string_t cmd_config_rxtx_queue_port =
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index 1722d6c8f8..7ce9cb483a 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -2817,6 +2817,9 @@ rxtx_config_display(void)
> rx_conf->share_qid);
> printf("\n");
> }
> + for (qid = 0; qid < nb_rxq; qid++)
> + if (ports[pid].rxq_state[qid].stopped)
> + printf(" RX queue %d is stopped\n", qid);
>
> /* per tx queue config only for first queue to be less verbose */
> for (qid = 0; qid < 1; qid++) {
> @@ -2850,6 +2853,9 @@ rxtx_config_display(void)
> printf(" TX offloads=0x%"PRIx64" - TX RS bit threshold=%d\n",
> offloads_tmp, tx_rs_thresh_tmp);
> }
> + for (qid = 0; qid < nb_txq; qid++)
> + if (ports[pid].txq_state[qid].stopped)
> + printf(" TX queue %d is stopped\n", qid);
> }
> }
>
> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
> index 6c387bde84..36ff845181 100644
> --- a/app/test-pmd/testpmd.c
> +++ b/app/test-pmd/testpmd.c
> @@ -2152,6 +2152,8 @@ flush_fwd_rx_queues(void)
> for (rxp = 0; rxp < cur_fwd_config.nb_fwd_ports; rxp++) {
> for (rxq = 0; rxq < nb_rxq; rxq++) {
> port_id = fwd_ports_ids[rxp];
> + if (ports[port_id].rxq_state[rxq].stopped)
> + continue;
> /**
> * testpmd can stuck in the below do while loop
> * if rte_eth_rx_burst() always returns nonzero
> @@ -2223,8 +2225,20 @@ run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
> static int
> start_pkt_forward_on_core(void *fwd_arg)
> {
> - run_pkt_fwd_on_lcore((struct fwd_lcore *) fwd_arg,
> - cur_fwd_config.fwd_eng->packet_fwd);
> + struct fwd_lcore *fc = fwd_arg;
> + struct fwd_stream *fsm = fwd_streams[fc->stream_idx];
> + struct queue_state *rxq = &ports[fsm->rx_port].rxq_state[fsm->rx_queue];
> + struct queue_state *txq = &ports[fsm->tx_port].txq_state[fsm->tx_queue];
> + struct fwd_engine *fwd_engine = cur_fwd_config.fwd_eng;
> + packet_fwd_t packet_fwd;
> +
> + /* Check if there will ever be any packets to send. */
> + if (rxq->stopped && (txq->stopped || fwd_engine != &tx_only_engine))
> + return 0;
> + /* Force rxonly mode if RxQ is started, but TxQ is stopped. */
> + packet_fwd = !rxq->stopped && txq->stopped ? rx_only_engine.packet_fwd
> + : fwd_engine->packet_fwd;
Should we have a print here for user info, that mode has been changed or
ignored.
> + run_pkt_fwd_on_lcore(fc, packet_fwd);
> return 0;
> }
>
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index 2149ecd93a..2744fa4d76 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -216,6 +216,12 @@ struct xstat_display_info {
> bool allocated;
> };
>
> +/** Application state of a queue. */
> +struct queue_state {
> + /** The queue is stopped and should not be used. */
> + bool stopped;
> +};
> +
> /**
> * The data structure associated with each port.
> */
> @@ -256,6 +262,10 @@ struct rte_port {
> uint64_t mbuf_dynf;
> const struct rte_eth_rxtx_callback *tx_set_dynf_cb[RTE_MAX_QUEUES_PER_PORT+1];
> struct xstat_display_info xstats_info;
> + /** Per-Rx-queue state. */
> + struct queue_state rxq_state[RTE_MAX_QUEUES_PER_PORT];
> + /** Per-Tx-queue state. */
> + struct queue_state txq_state[RTE_MAX_QUEUES_PER_PORT];
Can we think of adding rxq_state/txq_state as part of existing
structures under rte_port->rte_eth_rxconf/rte_eth_txconf.
And if it helps, rather than bool can we use u8 with eth_dev defines-
#define RTE_ETH_QUEUE_STATE_STOPPED 0 /**< Queue stopped. */
#define RTE_ETH_QUEUE_STATE_STARTED 1 /**< Queue started. */
> };
>
> /**
More information about the stable
mailing list