[PATCH 19.11] net/iavf: fix Rx queue interrupt setting

[Ke Zhang]

[ upstream commit a08f9cb698c3d4687765860e328dca727f7a516b ]

For Rx-Queue Interrupt Setting, when vf rx interrupt
disable(INTENA=0), there are two ways to write back
descriptor to host memory:

1)Set WB_ON_ITR bit 0 to Interrupt Dynamic Control Register:
Completed descriptors are posted to host memory according to
the internal descriptor cache policy (in other words when a
full cache line is available for write-back).

A internal descriptor size is 16 bytes or 32 bytes, a cache
line size is 64 bytes or 128 bytes from datasheet :
PCIe Global Config 2 - GLPCI_CNF2 (0x000BE004; RO)
so the full cache line could contains 4 packets, it means
Network card will send 4 packets to host when a full cache line
is available.

2)Set WB_ON_ITR bit 1 to Interrupt Dynamic Control Register:
Completed descriptors also trigger the ITR. Following ITR
expiration, all leftover completed descriptors are posted to
host memory.

Network card will send packet to host even if only one
descriptor is completed.

Changing 1) to 2) to make sure VF send the packet to host even
if there is only one rx packet is ready in hardware.

Fixes: d6bde6b5eae9 ("net/avf: enable Rx interrupt")
Cc: stable at dpdk.org

Signed-off-by: Ke Zhang <ke1x.zhang at intel.com>
---
 drivers/net/iavf/iavf_ethdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/iavf/iavf_ethdev.c b/drivers/net/iavf/iavf_ethdev.c
index 3cb02bd1f..00a47bf13 100644
--- a/drivers/net/iavf/iavf_ethdev.c
+++ b/drivers/net/iavf/iavf_ethdev.c
@@ -1209,7 +1209,7 @@ iavf_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id)
 
 	IAVF_WRITE_REG(hw,
 		      IAVFINT_DYN_CTLN1(msix_intr - IAVF_RX_VEC_START),
-		      0);
+		      IAVF_VFINT_DYN_CTLN1_WB_ON_ITR_MASK);
 
 	IAVF_WRITE_FLUSH(hw);
 	return 0;
-- 
2.25.1