[PATCH v3] net/mlx5: fix the NIC egress flow mismatch in switchdev mode
Ori Kam
orika at nvidia.com
Wed Mar 2 10:00:11 CET 2022
Hi Jiawei,
> -----Original Message-----
> From: Jiawei(Jonny) Wang <jiaweiw at nvidia.com>
> Sent: Friday, November 12, 2021 2:43 PM
> Subject: [PATCH v3] net/mlx5: fix the NIC egress flow mismatch in switchdev mode
>
> When E-Switch mode was enabled, the NIC egress flows was implicitly
> appended with source vport to match on. If the metadata register C0
> was used to maintain the source vport, it was initialized to zero
> on packet steering engine entry, the flow could be hit only
> if source vport was zero, the register C0 of the packet was not correct
> to match in the TX side, this caused egress flow misses.
>
> This patch:
> - removes the implicit source vport match for NIC egress flow.
> - rejects the NIC egress flows on the representor ports at validation.
> - allows the internal NIC egress flows containing the TX_QUEUE items in
> order to not impact hairpins.
>
> Fixes: ce777b147bf8 ("net/mlx5: fix E-Switch flow without port item")
> Cc: stable at dpdk.org
>
> Signed-off-by: Jiawei Wang <jiaweiw at nvidia.com>
> Acked-by: Viacheslav Ovsiienko <viacheslavo at nvidia.com>
> ---
> v3: update the tx_item checking
> v2: fix one typo
> ---
> doc/guides/nics/mlx5.rst | 2 ++
> drivers/net/mlx5/mlx5_flow_dv.c | 24 ++++++++++++++++++++----
> 2 files changed, 22 insertions(+), 4 deletions(-)
>
> diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
> index 043d006a2b..267d25ebb8 100644
> --- a/doc/guides/nics/mlx5.rst
> +++ b/doc/guides/nics/mlx5.rst
> @@ -493,6 +493,8 @@ Limitations
> completions, the scheduled send timestamps should not be specified
> with non-zero msb
>
> +- The NIC Egress flow on representor port is not supported.
> +
> Statistics
> ----------
>
> diff --git a/drivers/net/mlx5/mlx5_flow_dv.c b/drivers/net/mlx5/mlx5_flow_dv.c
> index 28911d6f0f..201f04ca84 100644
> --- a/drivers/net/mlx5/mlx5_flow_dv.c
> +++ b/drivers/net/mlx5/mlx5_flow_dv.c
> @@ -7164,8 +7164,10 @@ flow_dv_validate(struct rte_eth_dev *dev, const struct rte_flow_attr
> *attr,
> return ret;
> last_item = MLX5_FLOW_ITEM_TAG;
> break;
> - case MLX5_RTE_FLOW_ITEM_TYPE_TAG:
> case MLX5_RTE_FLOW_ITEM_TYPE_TX_QUEUE:
> + last_item = MLX5_FLOW_ITEM_TX_QUEUE;
> + break;
> + case MLX5_RTE_FLOW_ITEM_TYPE_TAG:
> break;
> case RTE_FLOW_ITEM_TYPE_GTP:
> ret = flow_dv_validate_item_gtp(dev, items, item_flags,
> @@ -7999,6 +8001,18 @@ flow_dv_validate(struct rte_eth_dev *dev, const struct rte_flow_attr
> *attr,
> return rte_flow_error_set(error, EINVAL,
> RTE_FLOW_ERROR_TYPE_ACTION, NULL,
> "sample before modify action is not supported");
> + /*
> + * Validation the NIC Egress flow on representor, except implicit
> + * hairpin default egress flow with TX_QUEUE item, other flows not
> + * work due to metadata regC0 mismatch.
> + */
> + if ((!attr->transfer && attr->egress) && priv->representor &&
> + !(item_flags & MLX5_FLOW_ITEM_TX_QUEUE))
> + return rte_flow_error_set(error, EINVAL,
> + RTE_FLOW_ERROR_TYPE_ITEM,
> + NULL,
> + "NIC egress rules on representors"
> + " is not supported");
> return 0;
> }
>
> @@ -13563,11 +13577,13 @@ flow_dv_translate(struct rte_eth_dev *dev,
> /*
> * When E-Switch mode is enabled, we have two cases where we need to
> * set the source port manually.
> - * The first one, is in case of Nic steering rule, and the second is
> - * E-Switch rule where no port_id item was found. In both cases
> - * the source port is set according the current port in use.
> + * The first one, is in case of NIC ingress steering rule, and the
> + * second is E-Switch rule where no port_id item was found.
> + * In both cases the source port is set according the current port
> + * in use.
> */
> if (!(item_flags & MLX5_FLOW_ITEM_PORT_ID) &&
> + !(attr->egress && !attr->transfer) &&
> (priv->representor || priv->master)) {
> if (flow_dv_translate_item_port_id(dev, match_mask,
> match_value, NULL, attr))
> --
> 2.18.1
Acked-by: Ori Kam <orika at nvidia.com>
Best,
Ori
More information about the stable
mailing list