[PATCH 19.11] net/nfp: free HW rings memzone on queue release

[heinrich.kuhn at corigine.com]

From: Heinrich Kuhn <heinrich.kuhn at corigine.com>

[upstream commit 15174c40b70dfa89c1d94ff93ae756fae8d471bc]

During rx/tx queue setup, memory is reserved for the hardware rings.
This memory zone should subsequently be freed in the queue release
logic. This commit also adds a call to the release logic in the
dev_close() callback so that the ring memzone may be freed during port
close too.

Signed-off-by: Heinrich Kuhn <heinrich.kuhn at corigine.com>
Signed-off-by: Simon Horman <simon.horman at corigine.com>

Fixes: b812daadad0d ("nfp: add Rx and Tx")
---
 drivers/net/nfp/nfp_net.c     | 16 ++++++++++++++++
 drivers/net/nfp/nfp_net_pmd.h |  6 ++++++
 2 files changed, 22 insertions(+)

diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index 978920f52..dfa984ef5 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -223,6 +223,7 @@ nfp_net_rx_queue_release(void *rx_queue)
 
 	if (rxq) {
 		nfp_net_rx_queue_release_mbufs(rxq);
+		rte_memzone_free(rxq->tz);
 		rte_free(rxq->rxbufs);
 		rte_free(rxq);
 	}
@@ -259,6 +260,7 @@ nfp_net_tx_queue_release(void *tx_queue)
 
 	if (txq) {
 		nfp_net_tx_queue_release_mbufs(txq);
+		rte_memzone_free(txq->tz);
 		rte_free(txq->txbufs);
 		rte_free(txq);
 	}
@@ -890,11 +892,15 @@ nfp_net_close(struct rte_eth_dev *dev)
 	for (i = 0; i < dev->data->nb_tx_queues; i++) {
 		nfp_net_reset_tx_queue(
 			(struct nfp_net_txq *)dev->data->tx_queues[i]);
+		nfp_net_tx_queue_release(
+			(struct nfp_net_txq *)dev->data->tx_queues[i]);
 	}
 
 	for (i = 0; i < dev->data->nb_rx_queues; i++) {
 		nfp_net_reset_rx_queue(
 			(struct nfp_net_rxq *)dev->data->rx_queues[i]);
+		nfp_net_rx_queue_release(
+			(struct nfp_net_rxq *)dev->data->rx_queues[i]);
 	}
 
 	rte_intr_disable(&pci_dev->intr_handle);
@@ -1605,6 +1611,11 @@ nfp_net_rx_queue_setup(struct rte_eth_dev *dev,
 	rxq->dma = (uint64_t)tz->iova;
 	rxq->rxds = (struct nfp_net_rx_desc *)tz->addr;
 
+	/* Also save the pointer to the memzone struct so it can be freed
+	 * if needed
+	 */
+	rxq->tz = tz;
+
 	/* mbuf pointers array for referencing mbufs linked to RX descriptors */
 	rxq->rxbufs = rte_zmalloc_socket("rxq->rxbufs",
 					 sizeof(*rxq->rxbufs) * nb_desc,
@@ -1745,6 +1756,11 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx,
 		return -ENOMEM;
 	}
 
+	/* Save the pointer to the memzone struct so it can be freed
+	 * if needed
+	 */
+	txq->tz = tz;
+
 	txq->tx_count = nb_desc;
 	txq->tx_free_thresh = tx_free_thresh;
 	txq->tx_pthresh = tx_conf->tx_thresh.pthresh;
diff --git a/drivers/net/nfp/nfp_net_pmd.h b/drivers/net/nfp/nfp_net_pmd.h
index 42ab369cf..a89e97b95 100644
--- a/drivers/net/nfp/nfp_net_pmd.h
+++ b/drivers/net/nfp/nfp_net_pmd.h
@@ -235,6 +235,9 @@ struct nfp_net_txq {
 	 */
 	struct nfp_net_tx_desc *txds;
 
+	/* Pointer to the memzone for the ring */
+	const struct rte_memzone *tz;
+
 	/*
 	 * At this point 48 bytes have been used for all the fields in the
 	 * TX critical path. We have room for 8 bytes and still all placed
@@ -370,6 +373,9 @@ struct nfp_net_rxq {
 	/* DMA address of the queue */
 	__le64 dma;
 
+	/* Pointer to the memzone for the ring */
+	const struct rte_memzone *tz;
+
 	/*
 	 * Queue information: @qidx is the queue index from Linux's
 	 * perspective.  @fl_qcidx is the index of the Queue
-- 
2.27.0