[PATCH v3 3/5] app/testpmd: fix port status of slave device
Min Hu (Connor)
humin29 at huawei.com
Wed May 11 04:16:56 CEST 2022
Hi, Konstantin,
fixed in v4, thanks.
在 2022/5/11 5:48, Konstantin Ananyev 写道:
>
> Hi Ferruh,
>
>> On 5/6/2022 9:16 AM, Min Hu (Connor) wrote:
>>> Hi, Konstantin,
>>>
>>> 在 2022/5/4 7:39, Konstantin Ananyev 写道:
>>>> 03/05/2022 11:02, Min Hu (Connor) пишет:
>>>>> From: Huisong Li <lihuisong at huawei.com>
>>>>>
>>>>> Starting or stopping a bonded port also starts or stops all active
>>>>> slaves
>>>>> under the bonded port. If this port is a bonded device, we need to
>>>>> modify
>>>>> the port status of all slaves.
>>>>>
>>>>> Fixes: 0e545d3047fe ("app/testpmd: check stopping port is not in
>>>>> bonding")
>>>>> Cc: stable at dpdk.org
>>>>>
>>>>> Signed-off-by: Huisong Li <lihuisong at huawei.com>
>>>>> Signed-off-by: Min Hu (Connor) <humin29 at huawei.com>
>>>>> Acked-by: Aman Singh <aman.deep.singh at intel.com>
>>>>> ---
>>>>> app/test-pmd/cmdline.c | 1 +
>>>>> app/test-pmd/testpmd.c | 74
>>>>> +++++++++++++++++++++++++++++++++++++++---
>>>>> app/test-pmd/testpmd.h | 3 +-
>>>>> 3 files changed, 73 insertions(+), 5 deletions(-)
>>>>>
>>>>> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
>>>>> index 6ffea8e21a..d9fc7a88bd 100644
>>>>> --- a/app/test-pmd/cmdline.c
>>>>> +++ b/app/test-pmd/cmdline.c
>>>>> @@ -6671,6 +6671,7 @@ static void
>>>>> cmd_create_bonded_device_parsed(void *parsed_result,
>>>>> "Failed to enable promiscuous mode for port %u:
>>>>> %s - ignore\n",
>>>>> port_id, rte_strerror(-ret));
>>>>> + ports[port_id].bond_flag = 1;
>>>>> ports[port_id].need_setup = 0;
>>>>> ports[port_id].port_status = RTE_PORT_STOPPED;
>>>>> }
>>>>> diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
>>>>> index fe2ce19f99..dc90600787 100644
>>>>> --- a/app/test-pmd/testpmd.c
>>>>> +++ b/app/test-pmd/testpmd.c
>>>>> @@ -66,6 +66,9 @@
>>>>> #ifdef RTE_EXEC_ENV_WINDOWS
>>>>> #include <process.h>
>>>>> #endif
>>>>> +#ifdef RTE_NET_BOND
>>>>> +#include <rte_eth_bond.h>
>>>>> +#endif
>>>>> #include "testpmd.h"
>>>>> @@ -597,11 +600,57 @@ eth_dev_configure_mp(uint16_t port_id,
>>>>> uint16_t nb_rx_q, uint16_t nb_tx_q,
>>>>> return 0;
>>>>> }
>>>>> +#ifdef RTE_NET_BOND
>>>>> +static int
>>>>> +change_bonding_slave_port_status(portid_t bond_pid, bool is_stop)
>>>>> +{
>>>>> + portid_t slave_pids[RTE_MAX_ETHPORTS];
>>>>> + struct rte_port *port;
>>>>> + int num_slaves;
>>>>> + portid_t slave_pid;
>>>>> + int i;
>>>>> +
>>>>> + num_slaves = rte_eth_bond_slaves_get(bond_pid, slave_pids,
>>>>> + RTE_MAX_ETHPORTS);
>>>>> + if (num_slaves < 0) {
>>>>> + fprintf(stderr, "Failed to get slave list for port = %u\n",
>>>>> + bond_pid);
>>>>> + return num_slaves;
>>>>> + }
>>>>> +
>>>>> + for (i = 0; i < num_slaves; i++) {
>>>>> + slave_pid = slave_pids[i];
>>>>> + port = &ports[slave_pid];
>>>>> + port->port_status =
>>>>> + is_stop ? RTE_PORT_STOPPED : RTE_PORT_STARTED;
>>>>> + }
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +#endif
>>>>> +
>>>>> static int
>>>>> eth_dev_start_mp(uint16_t port_id)
>>>>> {
>>>>> - if (is_proc_primary())
>>>>> - return rte_eth_dev_start(port_id);
>>>>> + int ret;
>>>>> +
>>>>> + if (is_proc_primary()) {
>>>>> + ret = rte_eth_dev_start(port_id);
>>>>> + if (ret != 0)
>>>>> + return ret;
>>>>> +
>>>>> +#ifdef RTE_NET_BOND
>>>>> + struct rte_port *port = &ports[port_id];
>>>>> +
>>>>> + /*
>>>>> + * Starting a bonded port also starts all slaves under the
>>>>> bonded
>>>>> + * device. So if this port is bond device, we need to
>>>>> modify the
>>>>> + * port status of these slaves.
>>>>> + */
>>>>> + if (port->bond_flag == 1)
>>>>> + return change_bonding_slave_port_status(port_id, false);
>>>>> +#endif
>>>>> + }
>>>>> return 0;
>>>>> }
>>>>> @@ -609,8 +658,25 @@ eth_dev_start_mp(uint16_t port_id)
>>>>> static int
>>>>> eth_dev_stop_mp(uint16_t port_id)
>>>>> {
>>>>> - if (is_proc_primary())
>>>>> - return rte_eth_dev_stop(port_id);
>>>>> + int ret;
>>>>> +
>>>>> + if (is_proc_primary()) {
>>>>> + ret = rte_eth_dev_stop(port_id);
>>>>> + if (ret != 0)
>>>>> + return ret;
>>>>> +
>>>>> +#ifdef RTE_NET_BOND
>>>>
>>>> Here and in other places - probably no need to pollute the code
>>>> with all these 'ifdef RTE_NET_BOND'.
>>>> I suppose this logic (for checking is bonding API present or not)
>>>> can be hidden inside change_bonding_slave_port_status() itself.
>>>>
>>> I think it does not pollute the code. anyone can tell according to
>>> the flag 'ifdef RTE_NET_BOND'.
>>> if hiddle inside 'change_bonding_slave_port_status', it will be weird.
>>> For example, if the port is not bonding port, It will also invoke
>>> 'change_bonding_slave_port_status'. That is unreasonable.
>>>
>>
>> Hi Konstantin,
>>
>> I also was not happy to have bonding (or any PMD) ifdef in the generic
>> (start()/stop()) functions, but the ifdef blocks updates testpmd
>> (application) level status. So that can't be handled in the PMD and
>> need to be in the application level.
>> Which is enforcing to have same PMD specific code in the testpmd level,
>> if you have any suggestion to prevent this, I am for it.
>
>
> I am not aking to move it to PMD.
> What I am saying that this ifdef logic could be grouped in one place
> (inside change_bonding_slave_port_status()) instead of spreading it
> around multiple places.
>
>>
>> I will proceed with first two patch of this set, which fixes bonding
>> PMD issues, I will hold the testpmd ones for more comments.
>>
>> Thanks,
>> ferruh
>>
>>>
>>>>
>>>>> + struct rte_port *port = &ports[port_id];
>>>>> +
>>>>> + /*
>>>>> + * Stopping a bonded port also stops all slaves under the
>>>>> bonded
>>>>> + * device. So if this port is bond device, we need to
>>>>> modify the
>>>>> + * port status of these slaves.
>>>>> + */
>>>>> + if (port->bond_flag == 1)
>>>>> + return change_bonding_slave_port_status(port_id, true);
>>>>> +#endif
>>>>> + }
>>>>> return 0;
>>>>> }
>>>>> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
>>>>> index 31f766c965..67f253b30e 100644
>>>>> --- a/app/test-pmd/testpmd.h
>>>>> +++ b/app/test-pmd/testpmd.h
>>>>> @@ -266,7 +266,8 @@ struct rte_port {
>>>>> uint32_t mc_addr_nb; /**< nb. of addr. in
>>>>> mc_addr_pool */
>>>>> queueid_t queue_nb; /**< nb. of queues for flow
>>>>> rules */
>>>>> uint32_t queue_sz; /**< size of a queue for
>>>>> flow rules */
>>>>> - uint8_t slave_flag; /**< bonding slave port */
>>>>> + uint8_t slave_flag : 1, /**< bonding slave
>>>>> port */
>>>>> + bond_flag : 1; /**< port is bond device */
>>>>> struct port_template *pattern_templ_list; /**< Pattern
>>>>> templates. */
>>>>> struct port_template *actions_templ_list; /**< Actions
>>>>> templates. */
>>>>> struct port_table *table_list; /**< Flow tables. */
>>>>
>>>> .
>>
>
> .
More information about the stable
mailing list