patch 'eventdev: improve Doxygen comments on configure struct' has been queued to stable release 21.11.7

[Kevin Traynor]

Hi,

FYI, your patch has been queued to stable release 21.11.7

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 03/13/24. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://github.com/kevintraynor/dpdk-stable

This queued commit can be viewed at:
https://github.com/kevintraynor/dpdk-stable/commit/5730dc49bad387fcd542179594688029c9efe164

Thanks.

Kevin

---
>From 5730dc49bad387fcd542179594688029c9efe164 Mon Sep 17 00:00:00 2001
From: Bruce Richardson <bruce.richardson at intel.com>
Date: Wed, 21 Feb 2024 10:32:15 +0000
Subject: [PATCH] eventdev: improve Doxygen comments on configure struct

[ upstream commit 1203462c5ada21bdace88e009db5a8f17f88528a ]

General rewording and cleanup on the rte_event_dev_config structure.
Improved the wording of some sentences and created linked
cross-references out of the existing references to the dev_info
structure.

As part of the rework, fix issue with how single-link port-queue pairs
were counted in the rte_event_dev_config structure. This did not match
the actual implementation and, if following the documentation, certain
valid port/queue configurations would have been impossible to configure.
Fix this by changing the documentation to match the implementation

Bugzilla ID:  1368
Fixes: 75d113136f38 ("eventdev: express DLB/DLB2 PMD constraints")

Signed-off-by: Bruce Richardson <bruce.richardson at intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula at marvell.com>
Acked-by: Jerin Jacob <jerinj at marvell.com>
---
 lib/eventdev/rte_eventdev.h | 61 ++++++++++++++++++++++---------------
 1 file changed, 37 insertions(+), 24 deletions(-)

diff --git a/lib/eventdev/rte_eventdev.h b/lib/eventdev/rte_eventdev.h
index 476bcbcc21..dfaa3e9cb1 100644
--- a/lib/eventdev/rte_eventdev.h
+++ b/lib/eventdev/rte_eventdev.h
@@ -476,7 +476,7 @@ struct rte_event_dev_config {
 	uint32_t dequeue_timeout_ns;
 	/**< rte_event_dequeue_burst() timeout on this device.
-	 * This value should be in the range of *min_dequeue_timeout_ns* and
-	 * *max_dequeue_timeout_ns* which previously provided in
-	 * rte_event_dev_info_get()
+	 * This value should be in the range of @ref rte_event_dev_info.min_dequeue_timeout_ns and
+	 * @ref rte_event_dev_info.max_dequeue_timeout_ns returned by
+	 * @ref rte_event_dev_info_get()
 	 * The value 0 is allowed, in which case, default dequeue timeout used.
 	 * @see RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT
@@ -486,38 +486,51 @@ struct rte_event_dev_config {
 	 * events that can be inflight in the eventdev at a given time. The
 	 * limit is required to ensure that the finite space in a closed system
-	 * is not overwhelmed. The value cannot exceed the *max_num_events*
-	 * as provided by rte_event_dev_info_get().
-	 * This value should be set to -1 for *open system*.
+	 * is not exhausted.
+	 * The value cannot exceed @ref rte_event_dev_info.max_num_events
+	 * returned by rte_event_dev_info_get().
+	 *
+	 * This value should be set to -1 for *open systems*, that is,
+	 * those systems returning -1 in @ref rte_event_dev_info.max_num_events.
+	 *
+	 * @see rte_event_port_conf.new_event_threshold
 	 */
 	uint8_t nb_event_queues;
 	/**< Number of event queues to configure on this device.
-	 * This value cannot exceed the *max_event_queues* which previously
-	 * provided in rte_event_dev_info_get()
+	 * This value *includes* any single-link queue-port pairs to be used.
+	 * This value cannot exceed @ref rte_event_dev_info.max_event_queues +
+	 * @ref rte_event_dev_info.max_single_link_event_port_queue_pairs
+	 * returned by rte_event_dev_info_get().
+	 * The number of non-single-link queues i.e. this value less
+	 * *nb_single_link_event_port_queues* in this struct, cannot exceed
+	 * @ref rte_event_dev_info.max_event_queues
 	 */
 	uint8_t nb_event_ports;
 	/**< Number of event ports to configure on this device.
-	 * This value cannot exceed the *max_event_ports* which previously
-	 * provided in rte_event_dev_info_get()
+	 * This value *includes* any single-link queue-port pairs to be used.
+	 * This value cannot exceed @ref rte_event_dev_info.max_event_ports +
+	 * @ref rte_event_dev_info.max_single_link_event_port_queue_pairs
+	 * returned by rte_event_dev_info_get().
+	 * The number of non-single-link ports i.e. this value less
+	 * *nb_single_link_event_port_queues* in this struct, cannot exceed
+	 * @ref rte_event_dev_info.max_event_ports
 	 */
 	uint32_t nb_event_queue_flows;
-	/**< Number of flows for any event queue on this device.
-	 * This value cannot exceed the *max_event_queue_flows* which previously
-	 * provided in rte_event_dev_info_get()
+	/**< Max number of flows needed for a single event queue on this device.
+	 * This value cannot exceed @ref rte_event_dev_info.max_event_queue_flows
+	 * returned by rte_event_dev_info_get()
 	 */
 	uint32_t nb_event_port_dequeue_depth;
-	/**< Maximum number of events can be dequeued at a time from an
-	 * event port by this device.
-	 * This value cannot exceed the *max_event_port_dequeue_depth*
-	 * which previously provided in rte_event_dev_info_get().
+	/**< Max number of events that can be dequeued at a time from an event port on this device.
+	 * This value cannot exceed @ref rte_event_dev_info.max_event_port_dequeue_depth
+	 * returned by rte_event_dev_info_get().
 	 * Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
-	 * @see rte_event_port_setup()
+	 * @see rte_event_port_setup() rte_event_dequeue_burst()
 	 */
 	uint32_t nb_event_port_enqueue_depth;
-	/**< Maximum number of events can be enqueued at a time from an
-	 * event port by this device.
-	 * This value cannot exceed the *max_event_port_enqueue_depth*
-	 * which previously provided in rte_event_dev_info_get().
+	/**< Maximum number of events can be enqueued at a time to an event port on this device.
+	 * This value cannot exceed @ref rte_event_dev_info.max_event_port_enqueue_depth
+	 * returned by rte_event_dev_info_get().
 	 * Ignored when device is not RTE_EVENT_DEV_CAP_BURST_MODE capable.
-	 * @see rte_event_port_setup()
+	 * @see rte_event_port_setup() rte_event_enqueue_burst()
 	 */
 	uint32_t event_dev_cfg;
@@ -529,5 +542,5 @@ struct rte_event_dev_config {
 	 * *nb_event_queues*. If the device has ports and queues that are
 	 * optimized for single-link usage, this field is a hint for how many
-	 * to allocate; otherwise, regular event ports and queues can be used.
+	 * to allocate; otherwise, regular event ports and queues will be used.
 	 */
 };
-- 
2.43.2

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2024-03-08 13:47:49.192146349 +0000
+++ 0004-eventdev-improve-Doxygen-comments-on-configure-struc.patch	2024-03-08 13:47:48.983686558 +0000
@@ -1 +1 @@
-From 1203462c5ada21bdace88e009db5a8f17f88528a Mon Sep 17 00:00:00 2001
+From 5730dc49bad387fcd542179594688029c9efe164 Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 1203462c5ada21bdace88e009db5a8f17f88528a ]
+
@@ -19 +20,0 @@
-Cc: stable at dpdk.org
@@ -29 +30 @@
-index 9808889625..fb1c4429f0 100644
+index 476bcbcc21..dfaa3e9cb1 100644
@@ -32 +33 @@
-@@ -685,7 +685,7 @@ struct rte_event_dev_config {
+@@ -476,7 +476,7 @@ struct rte_event_dev_config {
@@ -43 +44 @@
-@@ -695,38 +695,51 @@ struct rte_event_dev_config {
+@@ -486,38 +486,51 @@ struct rte_event_dev_config {
@@ -115 +116 @@
-@@ -738,5 +751,5 @@ struct rte_event_dev_config {
+@@ -529,5 +542,5 @@ struct rte_event_dev_config {