[dpdk-test-report] | ERROR | daily Intel builds (17/47)
sys_stv at intel.com
sys_stv at intel.com
Tue Mar 29 23:32:21 CEST 2016
- Previous message: [dpdk-test-report] | ERROR | daily Intel builds (17/47)
- Next message: [dpdk-test-report] [PatchWork]|SUCCESS| pw11741 ethdev: 100G and link speed>> > > API refactoring>> > >>> > > 2016-03-17 19:08, Thomas Monjalon:>> > > > There are still too few tests and reviews, especially for>> > > > autonegotiation with Intel devices (patch #6).>> > > > I would not be surprised to see some bugs in this rework.>> > >>> > > Any feedback about autoneg in e1000/ixgbe/i40e?>> > > Has it been tested before its integration in RC2?>> > >>> > > > The capabilities must be adapted per device. It can be improved in a>> > > > separate patch.>> > > >>> > > > It will be integrated in 16.04-rc2.>> > > > Please test and review shortly, thanks!>> > >>> > >>> > > ---------- Forwarded message ---------->> > > RE: DPDK link speed with Intel devices Hi, all We have worked>> > > out the basic test cases for the patchset.>> > > 1. Test the link speed on major Intel NICs to see if the speed is>> right.>> > > 2. Test the auto-negoation on major Intel NICs to ensure it's working.>> > > Nic covered: ixgbe, igb, i40e, fm10k, bonding(SW), virtio(SW)>> > >>> > > When we run the Test#1 for all major NICs. We found that all these>> NIC port(igb,>> > ixgbe, i40e, fm10k) can't be started. Pls check, if the patch is>> applied, all INTEL>> > port can't be start, terrible things!>> > >>> > > Interactive-mode selected>> > > Configuring Port 0 (socket 0)>> > > PMD: ixgbe_dev_tx_queue_setup(): sw_ring=0x7f13e99e3440>> > > hw_ring=0x7f13e99e5480 dma_addr=0x8299e5480>> > > PMD: ixgbe_set_tx_function(): Using simple tx code path>> > > PMD: ixgbe_set_tx_function(): Vector tx enabled.>> > > PMD: ixgbe_dev_rx_queue_setup(): sw_ring=0x7f13ffcb8080>> > > sw_sc_ring=0x7f13ffcbaac0 hw_ring=0x7f13e99d3380 dma_addr=0x8299d3380>> > > PMD: ixgbe_dev_start(): Invalid link_speeds for port 0; >> > > autonegotiation disabled Fail to start port 0 Configuring Port 1>> > > (socket 0)>> > > PMD: i40e_set_tx_function_flag(): Vector tx can be enabled on this>> txq.>> > > PMD: i40e_dev_rx_queue_setup(): Rx Burst Bulk Alloc Preconditions are>> > satisfied. Rx Burst Bulk Alloc function will be used on port=1, queue=0.>> > > PMD: i40e_dev_start(): Invalid link_speeds for port 1; autonegotiation>> > > disabled>> > >>> > >>> > > Just to double-check; is the test#1 adapted to the _new_ API that>> ethdev has>> > to set link speeds? For the output it seems autoneg is disabled =>>> fixed speed,>> > hence the new bitmaps have to be used.>> > >>> > > (I am not claiming patchset is bug free; there might be issues still)>> > >>> > > Regards>> > > marc>> > >>> > > Fail to start port 1>> > > Please stop the ports first>> > > Done>> > >>> > > Thanks>> > > Qian>> > >>> > >>> > > -----Original Message----->> > > RE: DPDK link speed with Intel devices>> > >>> > > Hi Mike,>> > >>> > > We just knew this patch set last week.>> > > Since this patch set is required to test with a lot of NIC,>> we need>> > more document from Dev about this patch.>> > > Currently, Qian is working on with Wenzhuo on it now.>> > >>> > > Waterman>> > >>> > >>> > > -----Original Message----->> > > FW: DPDK link speed with Intel devices>> > > Importance: High>> > >>> > > Hi Waterman, all>> > >>> > > See below - are you aware? And if so where are we with>> testing/resolution?>> > >>> > > Regards>> > > Mike>> > >>> > >>> > >>> > > -----Original Message----->> > >
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Last commit Time : Fri Mar 25 19:55:09 2016 +0100
Last Author : Thomas Monjalon
Last commit Hash : 6ac91f938cc88423885b757ce24c2a984da097d4
Last comment : version: 16.04-rc2
Build Summary : 47 Builds Done, 17 Successful, 30 Failures.
Failure details :
Failure #1
UBT144_32 / Linux 3.13.0-30 / ICC 14.0.0
Config: i686-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #2
FC21_32 / Linux 3.18.8-201 / GCC 4.9.2
Config: i686-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
Makefile:54: *** The RTE_TARGET chosen is not compatible with this environment (x86_64), for this application. Please change the definition of the RTE_TARGET environment variable, or run the application on a 32-bit OS. Stop.
DPDK/mk/rte.extsubdir.mk:46: recipe for target 'dpdk_qat' failed
DPDK/mk/rte.sdkexamples.mk:52: recipe for target 'i686-native-linuxapp-gcc_examples' failed
DPDK/mk/rte.sdkroot.mk:119: recipe for target 'examples' failed
Failure #3
FC21_32 / Linux 3.18.8-201 / ICC 15.0.0
Config: i686-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
Makefile:54: *** The RTE_TARGET chosen is not compatible with this environment (x86_64), for this application. Please change the definition of the RTE_TARGET environment variable, or run the application on a 32-bit OS. Stop.
DPDK/mk/rte.extsubdir.mk:46: recipe for target 'dpdk_qat' failed
DPDK/mk/rte.sdkexamples.mk:52: recipe for target 'i686-native-linuxapp-gcc_examples' failed
DPDK/mk/rte.sdkroot.mk:119: recipe for target 'examples' failed
Failure #4
SUSE11SP2_64 / Linux 3.0.13-0 / GCC 4.5.1
Config: x86_64-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
DPDK/lib/librte_lpm/rte_lpm.c: In function ‘add_depth_small_v20’:
DPDK/lib/librte_lpm/rte_lpm.c:778:7: error: unknown field ‘next_hop’ specified in initializer
compilation terminated due to -Wfatal-errors.
Failure #5
SUSE11SP2_64 / Linux 3.0.13-0 / ICC 14.0.0
Config: x86_64-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
DPDK/lib/librte_lpm/rte_lpm.c: In function ‘add_depth_small_v20’:
DPDK/lib/librte_lpm/rte_lpm.c:778:7: error: unknown field ‘next_hop’ specified in initializer
compilation terminated due to -Wfatal-errors.
Failure #6
SUSE11SP2_64 / Linux 3.0.13-0 / GCC 4.5.1
Config: x86_64-native-ivshmem-gcc
DPDK/lib/librte_lpm/rte_lpm.c: In function ‘add_depth_small_v20’:
DPDK/lib/librte_lpm/rte_lpm.c:778:7: error: unknown field ‘next_hop’ specified in initializer
compilation terminated due to -Wfatal-errors.
Failure #7
SUSE11SP2_64 / Linux 3.0.13-0 / ICC 14.0.0
Config: x86_64-native-ivshmem-icc
DPDK/lib/librte_lpm/rte_lpm.c: In function ‘add_depth_small_v20’:
DPDK/lib/librte_lpm/rte_lpm.c:778:7: error: unknown field ‘next_hop’ specified in initializer
compilation terminated due to -Wfatal-errors.
Failure #8
SUSE11SP3_32 / Linux 3.0.76-0 / GCC 4.3.4
Config: i686-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
DPDK/lib/librte_lpm/rte_lpm.c: In function 'add_depth_small_v20':
DPDK/lib/librte_lpm/rte_lpm.c:778: error: unknown field 'next_hop' specified in initializer
compilation terminated due to -Wfatal-errors.
Failure #9
SUSE11SP3_32 / Linux 3.0.76-0 / ICC 14.0.0
Config: i686-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
DPDK/lib/librte_lpm/rte_lpm.c: In function 'add_depth_small_v20':
DPDK/lib/librte_lpm/rte_lpm.c:778: error: unknown field 'next_hop' specified in initializer
compilation terminated due to -Wfatal-errors.
Failure #10
SUSE11SP3_64 / Linux 3.0.77-0 / GCC 4.5.1
Config: x86_64-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
DPDK/lib/librte_lpm/rte_lpm.c: In function ‘add_depth_small_v20’:
DPDK/lib/librte_lpm/rte_lpm.c:778:7: error: unknown field ‘next_hop’ specified in initializer
compilation terminated due to -Wfatal-errors.
Failure #11
SUSE11SP3_64 / Linux 3.0.77-0 / ICC 14.0.0
Config: x86_64-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
DPDK/lib/librte_lpm/rte_lpm.c: In function ‘add_depth_small_v20’:
DPDK/lib/librte_lpm/rte_lpm.c:778:7: error: unknown field ‘next_hop’ specified in initializer
compilation terminated due to -Wfatal-errors.
Failure #12
SUSE11SP3_64 / Linux 3.0.77-0 / GCC 4.5.1
Config: x86_64-native-ivshmem-gcc
DPDK/lib/librte_lpm/rte_lpm.c: In function ‘add_depth_small_v20’:
DPDK/lib/librte_lpm/rte_lpm.c:778:7: error: unknown field ‘next_hop’ specified in initializer
compilation terminated due to -Wfatal-errors.
Failure #13
SUSE11SP3_64 / Linux 3.0.77-0 / ICC 14.0.0
Config: x86_64-native-ivshmem-icc
DPDK/lib/librte_lpm/rte_lpm.c: In function ‘add_depth_small_v20’:
DPDK/lib/librte_lpm/rte_lpm.c:778:7: error: unknown field ‘next_hop’ specified in initializer
compilation terminated due to -Wfatal-errors.
Failure #14
FC18_32 / Linux 3.6.10-4 / ICC 14.0.0
Config: i686-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #15
FC20_32 / Linux 3.11.0 / ICC 14.0.0
Config: i686-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #16
UBT124_32 / Linux 3.8.0-29 / ICC 14.0.0
Config: i686-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #17
RHEL70_64 / Linux 3.10.0-123 / ICC 14.0.0
Config: x86_64-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #18
RHEL70_64 / Linux 3.10.0-123 / ICC 14.0.0
Config: x86_64-native-ivshmem-icc
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #19
UBT124_64 / Linux 3.8.0-29 / ICC 14.0.0
Config: x86_64-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #20
UBT124_64 / Linux 3.8.0-29 / ICC 14.0.0
Config: x86_64-native-ivshmem-icc
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #21
UBT144_64 / Linux 3.13.0-30 / ICC 14.0.0
Config: x86_64-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #22
UBT144_64 / Linux 3.13.0-30 / ICC 14.0.0
Config: x86_64-native-ivshmem-icc
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #23
FC21_64 / Linux 3.18.8-201 / ICC 15.0.0
Config: x86_64-native-ivshmem-icc
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
DPDK/mk/internal/rte.compile-pre.mk:126: recipe for target 'ena_ethdev.o' failed
DPDK/mk/rte.subdir.mk:61: recipe for target 'ena' failed
DPDK/mk/rte.subdir.mk:61: recipe for target 'net' failed
DPDK/mk/rte.sdkbuild.mk:77: recipe for target 'drivers' failed
DPDK/mk/rte.sdkroot.mk:123: recipe for target 'all' failed
DPDK/mk/rte.sdkinstall.mk:84: recipe for target 'pre_install' failed
DPDK/mk/rte.sdkroot.mk:98: recipe for target 'install' failed
Failure #24
FC21_64 / Linux 3.18.8-201 / ICC 15.0.0
Config: x86_64-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
DPDK/mk/internal/rte.compile-pre.mk:126: recipe for target 'ena_ethdev.o' failed
DPDK/mk/rte.subdir.mk:61: recipe for target 'ena' failed
DPDK/mk/rte.subdir.mk:61: recipe for target 'net' failed
DPDK/mk/rte.sdkbuild.mk:77: recipe for target 'drivers' failed
DPDK/mk/rte.sdkroot.mk:123: recipe for target 'all' failed
DPDK/mk/rte.sdkinstall.mk:84: recipe for target 'pre_install' failed
DPDK/mk/rte.sdkroot.mk:98: recipe for target 'install' failed
Failure #25
FreeBSD10.0_64 / Linux 10.0-RELEASE / GCC 4.8.4
Config: x86_64-native-bsdapp-gcc
CONFIG_RTE_BUILD_SHARED_LIB=y
In file included from DPDK/drivers/net/ena/base/ena_com.h:37:0,
from DPDK/drivers/net/ena/ena_ethdev.h:39,
from DPDK/drivers/net/ena/ena_ethdev.c:41:
DPDK/drivers/net/ena/base/ena_plat.h:48:2: error: #error "Invalid platform"
#error "Invalid platform"
^
compilation terminated due to -Wfatal-errors.
Failure #26
FreeBSD10.0_64 / Linux 10.0-RELEASE / CLANG 3.3
Config: x86_64-native-bsdapp-clang
CONFIG_RTE_BUILD_SHARED_LIB=y
In file included from DPDK/drivers/net/ena/base/ena_com.h:37:0,
from DPDK/drivers/net/ena/ena_ethdev.h:39,
from DPDK/drivers/net/ena/ena_ethdev.c:41:
DPDK/drivers/net/ena/base/ena_plat.h:48:2: error: #error "Invalid platform"
#error "Invalid platform"
^
compilation terminated due to -Wfatal-errors.
Failure #27
FC18_64 / Linux 3.6.10-4 / ICC 14.0.0
Config: x86_64-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #28
FC18_64 / Linux 3.6.10-4 / ICC 14.0.0
Config: x86_64-native-ivshmem-icc
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #29
FC20_64 / Linux 3.15.6-200 / ICC 14.0.0
Config: x86_64-native-ivshmem-icc
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Failure #30
FC20_64 / Linux 3.15.6-200 / ICC 14.0.0
Config: x86_64-native-linuxapp-icc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y
In file included from DPDK/drivers/net/ena/ena_ethdev.h(39),
from DPDK/drivers/net/ena/ena_ethdev.c(41):
DPDK/drivers/net/ena/base/ena_com.h(982): error #188: enumerated type mixed with another type
curr_moder_idx = *moder_tbl_idx;
^
compilation aborted for DPDK/drivers/net/ena/ena_ethdev.c (code 4)
Successful builds :
UBT144_32 / Linux 3.13.0-30 / GCC 4.8.2
Config: i686-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
FC18_32 / Linux 3.6.10-4 / GCC 4.7.2
Config: i686-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
FC20_32 / Linux 3.11.0 / GCC 4.8.2
Config: i686-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
UBT124_32 / Linux 3.8.0-29 / GCC 4.6.3
Config: i686-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
RHEL70_64 / Linux 3.10.0-123 / GCC 4.8.2
Config: x86_64-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
RHEL70_64 / Linux 3.10.0-123 / GCC 4.8.2
Config: x86_64-native-ivshmem-gcc
UBT124_64 / Linux 3.8.0-29 / GCC 4.6.3
Config: x86_64-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
UBT124_64 / Linux 3.8.0-29 / GCC 4.6.3
Config: x86_64-native-ivshmem-gcc
UBT144_64 / Linux 3.13.0-30 / GCC 4.8.2
Config: x86_64-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
UBT144_64 / Linux 3.13.0-30 / GCC 4.8.2
Config: x86_64-native-ivshmem-gcc
FC21_64 / Linux 3.18.8-201 / GCC 4.9.2
Config: x86_64-native-ivshmem-gcc
FC21_64 / Linux 3.18.8-201 / GCC 4.9.2
Config: x86_64-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
FC18_64 / Linux 3.6.10-4 / GCC 4.7.2
Config: x86_64-native-linuxapp-gcc
CONFIG_RTE_LIBRTE_PMD_PCAP=y,
CONFIG_RTE_NIC_BYPASS=y,
CONFIG_RTE_BUILD_SHARED_LIB=y,
CONFIG_RTE_LIBRTE_VHOST=y
FC18_64 / Linux 3.6.10-4 / GCC 4.7.2
Config: x86_64-native-ivshmem-gcc
FC20_64 / Linux 3.15.6-200 / GCC 4.8.2
Config: x86_64-native-ivshmem-gcc
FC20_64 / Linux 3.15.6-200 / GCC 4.8.2
Config: x86_64-native-linuxapp-gcc
enable_all_DEBUG_OPTION=y
FC20_64 / Linux 3.15.6-200 / CLANG 3.4
Config: x86_64-native-linuxapp-clang
- Previous message: [dpdk-test-report] | ERROR | daily Intel builds (17/47)
- Next message: [dpdk-test-report] [PatchWork]|SUCCESS| pw11741 ethdev: 100G and link speed>> > > API refactoring>> > >>> > > 2016-03-17 19:08, Thomas Monjalon:>> > > > There are still too few tests and reviews, especially for>> > > > autonegotiation with Intel devices (patch #6).>> > > > I would not be surprised to see some bugs in this rework.>> > >>> > > Any feedback about autoneg in e1000/ixgbe/i40e?>> > > Has it been tested before its integration in RC2?>> > >>> > > > The capabilities must be adapted per device. It can be improved in a>> > > > separate patch.>> > > >>> > > > It will be integrated in 16.04-rc2.>> > > > Please test and review shortly, thanks!>> > >>> > >>> > > ---------- Forwarded message ---------->> > > RE: DPDK link speed with Intel devices Hi, all We have worked>> > > out the basic test cases for the patchset.>> > > 1. Test the link speed on major Intel NICs to see if the speed is>> right.>> > > 2. Test the auto-negoation on major Intel NICs to ensure it's working.>> > > Nic covered: ixgbe, igb, i40e, fm10k, bonding(SW), virtio(SW)>> > >>> > > When we run the Test#1 for all major NICs. We found that all these>> NIC port(igb,>> > ixgbe, i40e, fm10k) can't be started. Pls check, if the patch is>> applied, all INTEL>> > port can't be start, terrible things!>> > >>> > > Interactive-mode selected>> > > Configuring Port 0 (socket 0)>> > > PMD: ixgbe_dev_tx_queue_setup(): sw_ring=0x7f13e99e3440>> > > hw_ring=0x7f13e99e5480 dma_addr=0x8299e5480>> > > PMD: ixgbe_set_tx_function(): Using simple tx code path>> > > PMD: ixgbe_set_tx_function(): Vector tx enabled.>> > > PMD: ixgbe_dev_rx_queue_setup(): sw_ring=0x7f13ffcb8080>> > > sw_sc_ring=0x7f13ffcbaac0 hw_ring=0x7f13e99d3380 dma_addr=0x8299d3380>> > > PMD: ixgbe_dev_start(): Invalid link_speeds for port 0; >> > > autonegotiation disabled Fail to start port 0 Configuring Port 1>> > > (socket 0)>> > > PMD: i40e_set_tx_function_flag(): Vector tx can be enabled on this>> txq.>> > > PMD: i40e_dev_rx_queue_setup(): Rx Burst Bulk Alloc Preconditions are>> > satisfied. Rx Burst Bulk Alloc function will be used on port=1, queue=0.>> > > PMD: i40e_dev_start(): Invalid link_speeds for port 1; autonegotiation>> > > disabled>> > >>> > >>> > > Just to double-check; is the test#1 adapted to the _new_ API that>> ethdev has>> > to set link speeds? For the output it seems autoneg is disabled =>>> fixed speed,>> > hence the new bitmaps have to be used.>> > >>> > > (I am not claiming patchset is bug free; there might be issues still)>> > >>> > > Regards>> > > marc>> > >>> > > Fail to start port 1>> > > Please stop the ports first>> > > Done>> > >>> > > Thanks>> > > Qian>> > >>> > >>> > > -----Original Message----->> > > RE: DPDK link speed with Intel devices>> > >>> > > Hi Mike,>> > >>> > > We just knew this patch set last week.>> > > Since this patch set is required to test with a lot of NIC,>> we need>> > more document from Dev about this patch.>> > > Currently, Qian is working on with Wenzhuo on it now.>> > >>> > > Waterman>> > >>> > >>> > > -----Original Message----->> > > FW: DPDK link speed with Intel devices>> > > Importance: High>> > >>> > > Hi Waterman, all>> > >>> > > See below - are you aware? And if so where are we with>> testing/resolution?>> > >>> > > Regards>> > > Mike>> > >>> > >>> > >>> > > -----Original Message----->> > >
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the test-report
mailing list