|FAILURE| pw138812-138826 [PATCH v14 15/15] log: colorize log output
qemudev at loongson.cn
qemudev at loongson.cn
Tue Mar 26 18:35:54 CET 2024
Test-Label: loongarch-unit-testing
Test-Status: FAILURE
http://dpdk.org/patch/138826
_Unit Testing FAIL_
Submitter: Stephen Hemminger <stephen at networkplumber.org>
Date: Tue, 26 Mar 2024 10:34:21 -0700
DPDK git baseline: Repo:dpdk
Branch: main
CommitID: ded4d4765171b88470e59307f10625e942f22fca
138812-138826 --> testing fail
Test environment and result as below:
+---------------------+----------------+
| Environment | dpdk_unit_test |
+---------------------+----------------+
| Loongnix-Server 8.3 | FAIL |
+---------------------+----------------+
Loongnix-Server 8.3
Kernel: 4.19.190+
Compiler: gcc 8.3
Test result details:
1/112 DPDK:fast-tests / acl_autotest OK 3.28s
2/112 DPDK:fast-tests / argparse_autotest OK 0.52s
3/112 DPDK:fast-tests / atomic_autotest OK 8.43s
4/112 DPDK:fast-tests / bitcount_autotest OK 0.22s
5/112 DPDK:fast-tests / bitmap_autotest OK 0.22s
6/112 DPDK:fast-tests / bitops_autotest OK 0.22s
7/112 DPDK:fast-tests / bitratestats_autotest OK 0.22s
8/112 DPDK:fast-tests / bpf_autotest OK 0.22s
9/112 DPDK:fast-tests / bpf_convert_autotest OK 0.22s
10/112 DPDK:fast-tests / byteorder_autotest OK 0.22s
11/112 DPDK:fast-tests / cksum_autotest OK 0.22s
12/112 DPDK:fast-tests / cmdline_autotest OK 0.22s
13/112 DPDK:fast-tests / common_autotest OK 1.17s
14/112 DPDK:fast-tests / compressdev_autotest SKIP 0.07s exit status 77
15/112 DPDK:fast-tests / cpuflags_autotest OK 0.22s
16/112 DPDK:fast-tests / crc_autotest OK 0.22s
17/112 DPDK:fast-tests / user_delay_us OK 0.22s
18/112 DPDK:fast-tests / debug_autotest OK 19.22s
19/112 DPDK:fast-tests / devargs_autotest OK 0.37s
20/112 DPDK:fast-tests / dispatcher_autotest OK 2.47s
21/112 DPDK:fast-tests / distributor_autotest OK 1.22s
22/112 DPDK:fast-tests / eal_flags_c_opt_autotest OK 1.22s
23/112 DPDK:fast-tests / eal_flags_main_opt_autotest OK 0.32s
24/112 DPDK:fast-tests / eal_flags_n_opt_autotest OK 0.27s
25/112 DPDK:fast-tests / eal_flags_hpet_autotest OK 0.17s
26/112 DPDK:fast-tests / eal_flags_no_huge_autotest OK 0.32s
27/112 DPDK:fast-tests / eal_flags_a_opt_autotest OK 0.42s
28/112 DPDK:fast-tests / eal_flags_b_opt_autotest OK 0.37s
29/112 DPDK:fast-tests / eal_flags_vdev_opt_autotest OK 0.27s
30/112 DPDK:fast-tests / eal_flags_r_opt_autotest OK 0.27s
31/112 DPDK:fast-tests / eal_flags_mem_autotest OK 0.77s
32/112 DPDK:fast-tests / eal_flags_file_prefix_autotest OK 22.36s
33/112 DPDK:fast-tests / eal_flags_misc_autotest FAIL 1.32s exit status 255
34/112 DPDK:fast-tests / eal_fs_autotest OK 0.32s
35/112 DPDK:fast-tests / errno_autotest OK 0.32s
36/112 DPDK:fast-tests / ethdev_link_status OK 0.32s
37/112 DPDK:fast-tests / event_eth_tx_adapter_autotest OK 1.72s
38/112 DPDK:fast-tests / event_ring_autotest OK 0.32s
39/112 DPDK:fast-tests / eventdev_common_autotest OK 0.32s
40/112 DPDK:fast-tests / eventdev_selftest_sw OK 7.33s
41/112 DPDK:fast-tests / fbarray_autotest OK 0.32s
42/112 DPDK:fast-tests / fib_autotest OK 1.02s
43/112 DPDK:fast-tests / fib6_autotest OK 1.07s
44/112 DPDK:fast-tests / func_reentrancy_autotest OK 2.23s
45/112 DPDK:fast-tests / graph_autotest OK 0.32s
46/112 DPDK:fast-tests / node_list_dump OK 0.32s
47/112 DPDK:fast-tests / hash_autotest OK 1.07s
48/112 DPDK:fast-tests / hash_readwrite_func_autotest OK 6.43s
49/112 DPDK:fast-tests / interrupt_autotest OK 1.62s
50/112 DPDK:fast-tests / ipfrag_autotest OK 0.12s
51/112 DPDK:fast-tests / ipsec_autotest SKIP 0.32s exit status 77
52/112 DPDK:fast-tests / kvargs_autotest OK 0.32s
53/112 DPDK:fast-tests / latencystats_autotest OK 0.32s
54/112 DPDK:fast-tests / lcores_autotest OK 5.13s
55/112 DPDK:fast-tests / logs_autotest OK 0.32s
56/112 DPDK:fast-tests / lpm_autotest OK 2.43s
57/112 DPDK:fast-tests / lpm6_autotest OK 5.54s
58/112 DPDK:fast-tests / malloc_autotest OK 61.09s
59/112 DPDK:fast-tests / mbuf_autotest OK 4.93s
60/112 DPDK:fast-tests / mcslock_autotest OK 2.72s
61/112 DPDK:fast-tests / member_autotest OK 1.52s
62/112 DPDK:fast-tests / memcpy_autotest OK 6.98s
63/112 DPDK:fast-tests / memory_autotest OK 0.12s
64/112 DPDK:fast-tests / mempool_autotest OK 0.47s
65/112 DPDK:fast-tests / memzone_autotest OK 0.17s
66/112 DPDK:fast-tests / meter_autotest OK 0.32s
67/112 DPDK:fast-tests / metrics_autotest OK 0.32s
68/112 DPDK:fast-tests / multiprocess_autotest OK 0.27s
69/112 DPDK:fast-tests / net_ether_autotest OK 1.02s
70/112 DPDK:fast-tests / pcapng_autotest OK 7.98s
71/112 DPDK:fast-tests / pdcp_autotest SKIP 0.07s exit status 77
72/112 DPDK:fast-tests / pdump_autotest OK 0.47s
73/112 DPDK:fast-tests / per_lcore_autotest OK 0.42s
74/112 DPDK:fast-tests / pflock_autotest OK 1.17s
75/112 DPDK:fast-tests / pie_autotest OK 0.37s
76/112 DPDK:fast-tests / ring_pmd_autotest OK 0.32s
77/112 DPDK:fast-tests / power_autotest OK 0.32s
78/112 DPDK:fast-tests / power_cpufreq_autotest SKIP 0.07s exit status 77
79/112 DPDK:fast-tests / power_intel_uncore_autotest SKIP 0.32s exit status 77
80/112 DPDK:fast-tests / power_kvm_vm_autotest SKIP 0.07s exit status 77
81/112 DPDK:fast-tests / prefetch_autotest OK 0.32s
82/112 DPDK:fast-tests / rawdev_autotest OK 0.32s
83/112 DPDK:fast-tests / rcu_qsbr_autotest OK 0.87s
84/112 DPDK:fast-tests / reorder_autotest OK 0.42s
85/112 DPDK:fast-tests / rib_autotest OK 8.99s
86/112 DPDK:fast-tests / rib6_autotest OK 9.00s
87/112 DPDK:fast-tests / ring_autotest OK 0.38s
88/112 DPDK:fast-tests / rwlock_test1_autotest OK 1.07s
89/112 DPDK:fast-tests / rwlock_rda_autotest OK 5.33s
90/112 DPDK:fast-tests / rwlock_rds_wrm_autotest OK 5.43s
91/112 DPDK:fast-tests / rwlock_rde_wro_autotest OK 5.33s
92/112 DPDK:fast-tests / sched_autotest OK 0.32s
93/112 DPDK:fast-tests / security_autotest OK 0.12s
94/112 DPDK:fast-tests / seqlock_autotest OK 2.32s
95/112 DPDK:fast-tests / service_autotest OK 3.07s
96/112 DPDK:fast-tests / spinlock_autotest OK 0.42s
97/112 DPDK:fast-tests / stack_autotest OK 0.87s
98/112 DPDK:fast-tests / stack_lf_autotest SKIP 0.07s exit status 77
99/112 DPDK:fast-tests / string_autotest OK 0.32s
100/112 DPDK:fast-tests / table_autotest OK 7.54s
101/112 DPDK:fast-tests / tailq_autotest OK 0.32s
102/112 DPDK:fast-tests / telemetry_data_autotest OK 0.32s
103/112 DPDK:fast-tests / telemetry_json_autotest OK 0.42s
104/112 DPDK:fast-tests / thash_autotest OK 0.32s
105/112 DPDK:fast-tests / threads_autotest OK 0.52s
106/112 DPDK:fast-tests / ticketlock_autotest OK 0.47s
107/112 DPDK:fast-tests / timer_autotest OK 3.93s
108/112 DPDK:fast-tests / trace_autotest OK 0.32s
109/112 DPDK:fast-tests / trace_autotest_with_traces OK 0.32s
110/112 DPDK:fast-tests / vdev_autotest OK 0.32s
111/112 DPDK:fast-tests / version_autotest OK 0.32s
112/112 DPDK:fast-tests / telemetry_all OK 1.27s
Ok: 104
Expected Fail: 0
Fail: 1
Unexpected Pass: 0
Skipped: 7
Timeout: 0
Test logs for failed test cases:
================================================================================
DPDK:fast-tests / eal_flags_misc_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_misc_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--invalid-opt'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog[=<when>] Enable use of syslog
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--log-timestamp[=<format>] Timestamp log output
--log-color[=<when>] Colorize log messages
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--no-pci'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-v'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--no-shconf' '--file-prefix=noshconf' '--no-huge'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--syslog'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--syslog=both'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--syslog=invalid'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--file-prefix=hugedir' '--huge-dir' '/dev/hugepages'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--file-prefix=hugedir' '--huge-dir'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog[=<when>] Enable use of syslog
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--log-timestamp[=<format>] Timestamp log output
--log-color[=<when>] Colorize log messages
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--file-prefix=hugedir' '--huge-dir' 'invalid'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--file-prefix=hugedir' '--huge-dir' '/dev/hugepages/dpdk.missing'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '-m' '18' '--file-prefix=hugedir' '--huge-dir' '/dev/hugepages/dpdk.dir'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--huge-dir' 'invalid'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=virtaddr' '--base-virtaddr=0x23456789'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=intr' '--vfio-intr=legacy'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=intr' '--vfio-intr=msi'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=intr' '--vfio-intr=msix'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=intr' '--vfio-intr=invalid'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog[=<when>] Enable use of syslog
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--log-timestamp[=<format>] Timestamp log output
--log-color[=<when>] Colorize log messages
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=auto' '--proc-type=auto'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--proc-type=auto' '--no-shconf' '--file-prefix=noshconf' '--no-huge'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=uiodev' '--create-uio-dev'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--huge-worker-stack'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--huge-worker-stack=512'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--log-timestamp'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--log-timestamp=iso'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--log-timestamp=invalid'
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '--log-color'
Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog[=<when>] Enable use of syslog
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--log-timestamp[=<format>] Timestamp log output
--log-color[=<when>] Colorize log messages
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Error - process did not run ok with --log-color parameter
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: unrecognized option '--invalid-opt'
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034483_2329aad16694b
EAL: Selected IOVA mode 'PA'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: RTE Version: 'DPDK 24.03.0-rc4'
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034486_2329aad569213
EAL: Selected IOVA mode 'PA'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Selected IOVA mode 'VA'
TELEMETRY: No legacy callbacks, legacy socket not created
dpdk-test[3034495]: EAL: Detected CPU lcores: 32
dpdk-test[3034495]: EAL: Detected NUMA nodes: 8
dpdk-test[3034495]: EAL: Detected static linkage of DPDK
dpdk-test[3034495]: EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034495_2329aae27bbbf
dpdk-test[3034495]: EAL: Selected IOVA mode 'PA'
EAL: invalid parameters for --syslog
EAL: invalid log arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/hugedir/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: option '--huge-dir' requires an argument
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/hugedir/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 511 hugepages of size 33554432 reserved, but no mounted hugetlbfs found for that size
EAL: Cannot get hugepage information.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/hugedir/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: 511 hugepages of size 33554432 reserved, but no mounted hugetlbfs found for that size
EAL: Cannot get hugepage information.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/hugedir/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034514_2329aaffc21ad
EAL: Selected IOVA mode 'PA'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/virtaddr/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: WARNING! Base virtual address hint (0x2e040000 != 0xf7f4000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x3a050000 != 0xeff2000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x46060000 != 0xe7f0000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x52070000 != 0xdfee000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x5e080000 != 0xd7ec000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x6a090000 != 0xcfea000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x760a0000 != 0xc7e8000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x820b0000 != 0xbfe6000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x8e0c0000 != 0xb7e4000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0x9a0d0000 != 0xafe2000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xa60e0000 != 0xa7e0000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xb20f0000 != 0x9fde000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xbe100000 != 0x97dc000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xca110000 != 0x8fda000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xd6120000 != 0x87d8000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
EAL: WARNING! Base virtual address hint (0xe2130000 != 0x7fd6000000) not respected!
EAL: This may cause issues with mapping memory into secondary processes
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/intr/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/intr/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/intr/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: invalid parameters for --vfio-intr
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Auto-detected process type: PRIMARY
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/auto/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Auto-detected process type: PRIMARY
EAL: Static memory layout is selected, amount of reserved memory can be adjusted with -m or --socket-mem
EAL: Detected static linkage of DPDK
EAL: Selected IOVA mode 'VA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/uiodev/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034545_2329ab2c7809b
EAL: Selected IOVA mode 'PA'
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034548_2329ab30d2dae
EAL: Selected IOVA mode 'PA'
[ 0.021795] EAL: Detected CPU lcores: 32
[ 0.021869] EAL: Detected NUMA nodes: 8
[ 0.022300] EAL: Detected static linkage of DPDK
[ 0.025361] EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034551_2329ab352e6e2
[ 0.030641] EAL: Selected IOVA mode 'PA'
[2024-03-27T01:32:41,183862+08:00] EAL: Detected CPU lcores: 32
[2024-03-27T01:32:41,184057+08:00] EAL: Detected NUMA nodes: 8
[2024-03-27T01:32:41,184462+08:00] EAL: Detected static linkage of DPDK
[2024-03-27T01:32:41,187599+08:00] EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3034554_2329ab398c1ec
[2024-03-27T01:32:41,192811+08:00] EAL: Selected IOVA mode 'PA'
EAL: invalid parameters for --log-timestamp
EAL: invalid log arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: option '--log-color' requires an argument
EAL: Invalid 'command line' arguments.
More information about the test-report
mailing list