[dpdk-users] DPDK-PKTGEN- Did not find any ports to use

[Vamsi Kommana]

Hi John,

Thanks for the reply, sorted out the issue.
I was successfully able to run pktgen.

Thanks,
Kommana

-----Original Message-----
From: Mcnamara, John [mailto:john.mcnamara at intel.com]
Sent: 23 October 2015 16:14
To: Vamsi Kommana; users at dpdk.org
Subject: RE: DPDK-PKTGEN- Did not find any ports to use



> -----Original Message-----
> From: users [mailto:users-bounces at dpdk.org] On Behalf Of Vamsi Kommana
> Sent: Friday, October 23, 2015 8:03 AM
> To: users at dpdk.org
> Subject: [dpdk-users] DPDK-PKTGEN- Did not find any ports to use
>
> Other network devices
> =====================
> <none>
> [root at localhost tools]# ./dpdk_nic_bind.py -bind=igb_uio p1p2
> Error: bind failed for 0000:01:00.1 - Cannot open
> /sys/bus/pci/drivers/ind=igb_uio/bind
> Error: unbind failed for 0000:01:00.1 - Cannot open
> /sys/bus/pci/drivers//unbind [root at localhost tools]# [root at localhost
> tools]#
>
> Please let me know if i miss any...

Hi,

Try with --bind or just -b (but not with -bind, i.e., not with a single dash).

See the usage:

   ./tools/dpdk_nic_bind.py --help


John.
--


L&T Technology Services Ltd

www.LntTechservices.com<http://www.lnttechservices.com/>

This Email may contain confidential or privileged information for the intended recipient (s). If you are not the intended recipient, please do not use or disseminate the information, notify the sender and delete it from your system.