[dpdk-users] SyntaxError in setup.sh during binding ethernet device

[dawid_jurek]

W dniu 2016-01-27 14:48:05 użytkownik Thomas Monjalon <thomas.monjalon at 6wind.com> napisał:
> 2016-01-27 14:44, dawid_jurek:
> > W dniu 2016-01-19 11:54:24 użytkownik dawid_jurek <dawid_jurek at vp.pl> napisał:
> > > 
> > > 
> > > W dniu 2016-01-19 11:19:55 użytkownik Thomas Monjalon <thomas.monjalon at 6wind.com> napisał:
> > > > Hi
> > > > 
> > > > 2016-01-19 10:45, dawid_jurek:
> > > > > Hello DPDK developers,
> > > > > I experienced issue when I ran tools/setup.sh and chose option [23]: Bind Ethernet device to IGB UIO module.
> > > > > Script Output:
> > > > > File ".../dpdk/dpdk-2.2.0/tools/dpdk_nic_bind.py", line 113
> > > > >     """ % locals() # replace items from local variables
> > > > >       ^
> > > > > SyntaxError: invalid syntax
> > > > > It turned out that python 2.7 set as default in system was needed.
> > > > > So I added python2 to every line with dpdk_nic_bind.py call in tools/setup.sh and now it works fine.
> > > > > But the question is: is it expected behaviour? Shouldn't it be fixed by simple patch in way I did it?
> > > > 
> > > > Yes a patch would be appreciated to make it python 3 friendly.
> > > > Thanks
> > > > 
> > > 
> > > OK. I will prepare patch for dpdk_nic_bind.py soon.
> > > Regards,
> > > Dawid
> > > 
> > > 
> > 
> > Hello again,
> > patch for this issue was prepared and tested on Arch (Python 3 is default) and Ubuntu (Python 2 is default) distros. 
> > In both cases syntax errors from dpdk_nic_bind.py disappeared and everything worked as expected. 
> > Patch is very simple and in most cases just adds extra brackets to print functions.
> > Anyway please review this.
> 
> It looks simple and good.
> Please could you send it on dev at dpdk.org?
> The procedure is described here:
> 	http://dpdk.org/dev#send
> and detailed here:
> 	http://dpdk.org/doc/guides/contributing/patches.html
> 
> Thanks
> 

Done. Available here:
http://dpdk.org/ml/archives/dev/2016-January/032148.html

Regards,
Dawid