[dpdk-users] EAL: No probed ethernet devices

dawid_jurek dawid_jurek at vp.pl
Wed May 4 20:37:25 CEST 2016


Hello Upendra,

"I have bound Intel 82579V nic with
igb_uio and was working on testpmd application and i am not getting any
ports for testpmd probably beacuse of EAL: No probed ethernet devices
error."

Are you sure this device is supported by dpdk? According to NIC's list coming from: http://dpdk.org/doc/nics Intel 82579V is not supported by any PMD. 
To be 100% sure you may look at dpdk source code - dpdk/lib/librte_eal/common/include/rte_pci_dev_ids.h which doesn't contain 82579V as well.  
Good news is that your second card - Intel 82540EM is supported by e1000 from dpdk.

Regards,
Dawid
 

W dniu 2016-05-04 16:47:26 użytkownik Upendra Pathrikar <uspathrikar at gmail.com> napisał:
> I am new to DPDK and running 2.2.0,I have bound Intel 82579V nic with
> igb_uio and was working on testpmd application and i am not getting any
> ports for testpmd probably beacuse of EAL: No probed ethernet devices
> error. Please let me know what i'm doing wrong.
> 
> //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
> 
> Network devices using DPDK-compatible driver
> ============================================
> 0000:00:19.0 '82579V Gigabit Network Connection' drv=igb_uio
> unused=uio_pci_generic
> 
> Network devices using kernel driver
> ===================================
> 0000:02:00.0 '82540EM Gigabit Ethernet Controller' if=eth0 drv=e1000
> unused=igb_uio,uio_pci_generic *Active*
> 
> Other network devices
> =====================
> <none>
> 
> //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
> 
> -pmd$ sudo ./testpmd -c 0xf -n 4 -w 00:19.0 -- -i
> EAL: Detected lcore 0 as core 0 on socket 0
> EAL: Detected lcore 1 as core 1 on socket 0
> EAL: Detected lcore 2 as core 2 on socket 0
> EAL: Detected lcore 3 as core 3 on socket 0
> EAL: Support maximum 128 logical core(s) by configuration.
> EAL: Detected 4 lcore(s)
> EAL: VFIO modules not all loaded, skip VFIO support...
> EAL: Setting up physically contiguous memory...
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f4ed1e00000 (size = 0x200000)
> EAL: Ask a virtual area of 0x1400000 bytes
> EAL: Virtual area found at 0x7f4ed0800000 (size = 0x1400000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f4ed0400000 (size = 0x200000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f4ed0000000 (size = 0x200000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f4ecfc00000 (size = 0x200000)
> EAL: Ask a virtual area of 0x3e400000 bytes
> EAL: Virtual area found at 0x7f4e91600000 (size = 0x3e400000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f4e91200000 (size = 0x200000)
> EAL: Ask a virtual area of 0x3fc00000 bytes
> EAL: Virtual area found at 0x7f4e51400000 (size = 0x3fc00000)
> EAL: Ask a virtual area of 0x200000 bytes
> EAL: Virtual area found at 0x7f4e51000000 (size = 0x200000)
> EAL: Requesting 1024 pages of size 2MB from socket 0
> EAL: TSC frequency is ~3092975 KHz
> EAL: Master lcore 0 is ready (tid=d40d7940;cpuset=[0])
> EAL: lcore 1 is ready (tid=50fff700;cpuset=[1])
> EAL: lcore 3 is ready (tid=4fffd700;cpuset=[3])
> EAL: lcore 2 is ready (tid=507fe700;cpuset=[2])
> EAL: No probed ethernet devices
> Interactive-mode selected
> Done
> testpmd> show info port all
> Bad arguments
> testpmd> show port info all
> testpmd> show port info 0
> Invalid port 0
> Valid port range is [0]
> testpmd> show port info 1
> Invalid port 1
> Valid port range is [0]
> testpmd> quit
> bye...
> 
> //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
>  even i white listed specific nic , still i am getting the error
> please let me know, how to resolve this.
> 
> Thanks
> 
> -- 
> 
> 
> 
> 
> 
> *Regards,Upendra Sunil PathrikarBharti School of Telecom Technology and
> Management,Indian Institute of Technology, Delhi.*
> 





More information about the users mailing list