[dpdk-users] [dpdk-dev] [PATCH 00/29] ixgbe/base: update base driver
Klaus Degner
kd at allegro-packets.com
Mon May 30 09:13:23 CEST 2016
Am 30.05.16 um 04:15 schrieb Xing, Beilei:
>> -----Original Message-----
>> From: Klaus Degner [mailto:kd at allegro-packets.com]
>> Sent: Friday, May 27, 2016 5:32 PM
>> To: Xing, Beilei <beilei.xing at intel.com>
>> Cc: users at dpdk.org
>> Subject: Re: [dpdk-dev] [PATCH 00/29] ixgbe/base: update base driver
>>
>> Hi Beilei,
>>
>> I have an Supermicro Xeon-D system ( 5018D-FN8T ) with 2x 10G Intel X552
>> SFP+ connectors and compatible SFP+ DAC cables.
> Hi Degner,
> What's the Supermicro Xeon-D system? is it soc? Since we haven't tried it before.
> Thanks
> Beilei
Hi Beilei,
It is a NIC from the SoC Xeon-D 1518:
http://www.supermicro.nl/products/system/1U/5018/SYS-5018D-FN8T.cfm
lspci output for the ports:
04:00.0 Ethernet controller: Intel Corporation Ethernet Connection X552
10 GbE SFP+
04:00.1 Ethernet controller: Intel Corporation Ethernet Connection X552
10 GbE SFP+
>
>> The link status is always down and I cannot bring it up. I have tried the latest
>> stable release and the current master.
>> I have also used your latest update base driver patch from below, but also
>> without success.
> Did you try kernel driver on the system? Does it work well?
> Beilei
We have tested the latest stable ixgbe 4.3.15 and it has the same
behavior. It detects the interfaces but the link is always down.
Klaus
More information about the users
mailing list