[dpdk-users] DPDK mlx4 PMD on Azure VM
Hui Ling
kelvin.brookletling at gmail.com
Thu Dec 21 08:35:00 CET 2017
Andy,
My last VM is not in "Canada East" center since no AN type of instance
was available to me at the time I created my VM.
Just tried on a same type VM in Canada East, and it seems that the
location does make a difference.
This time, I was able to run testpmd without any explicit errors:
root at myVM:/home/hling/dpdk-17.11# build/app/testpmd -l 1-2 -n 4 -w
0004:00:02.0 0002:00:02.0 -- --rxq=2 --txq=2 -i
EAL: Detected 4 lcore(s)
EAL: No free hugepages reported in hugepages-1048576kB
EAL: Probing VFIO support...
EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
unreliable clock cycles !
EAL: PCI device 0004:00:02.0 on NUMA socket 0
EAL: probe driver: 15b3:1004 net_mlx4
PMD: mlx4.c:465: mlx4_pci_probe(): PCI information matches, using
device "mlx4_3" (VF: true)
PMD: mlx4.c:492: mlx4_pci_probe(): 1 port(s) detected
PMD: mlx4.c:586: mlx4_pci_probe(): port 1 MAC address is 00:0d:3a:f4:49:c4
Interactive-mode selected
USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=155456,
size=2176, socket=0
Configuring Port 0 (socket 0)
Port 0: 00:0D:3A:F4:49:C4
Checking link statuses...
Done
testpmd> start tx_first
io packet forwarding - ports=1 - cores=1 - streams=2 - NUMA support
enabled, MP over anonymous pages disabled
Logical Core 2 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
RX P=0/Q=1 (socket 0) -> TX P=0/Q=1 (socket 0) peer=02:00:00:00:00:00
io packet forwarding - CRC stripping enabled - packets/burst=32
nb forwarding cores=1 - nb forwarding ports=1
RX queues=2 - RX desc=128 - RX free threshold=0
RX threshold registers: pthresh=0 hthresh=0 wthresh=0
TX queues=2 - TX desc=512 - TX free threshold=0
TX threshold registers: pthresh=0 hthresh=0 wthresh=0
TX RS bit threshold=0 - TXQ flags=0x0
testpmd> stop
Telling cores to stop...
Waiting for lcores to finish...
------- Forward Stats for RX Port= 0/Queue= 0 -> TX Port= 0/Queue= 0 -------
RX-packets: 0 TX-packets: 32 TX-dropped: 0
------- Forward Stats for RX Port= 0/Queue= 1 -> TX Port= 0/Queue= 1 -------
RX-packets: 0 TX-packets: 32 TX-dropped: 0
---------------------- Forward statistics for port 0 ----------------------
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 64 TX-dropped: 0 TX-total: 64
----------------------------------------------------------------------------
+++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++
RX-packets: 0 RX-dropped: 0 RX-total: 0
TX-packets: 64 TX-dropped: 0 TX-total: 64
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Done.
testpmd>
Not sure why I don't see any packets transmission, but at least the
MLX4 PMD seems to be able to talk to the mlx4_en driver, or is it?
Will keep digging.
Hui
On Wed, Dec 20, 2017 at 9:39 PM, Andrew Bainbridge
<andbain at microsoft.com> wrote:
> Hi Hui
>
> Did you create your VM in the "Canada East" data center? This page suggests that is a requirement:
> https://azure.microsoft.com/en-us/blog/azure-networking-updates-for-fall-2017/
>
> Also, I seem to remember reading that the VM must have at least 8 cores. Sorry, I can't find a reference for that.
>
> - Andy
>
> -----Original Message-----
> From: Hui Ling
>
> This is my VM info in case it is needed.
> =======================================================================================================
> A Standard_DS3_v2 instance from Azure. (one of these models support AN)
>
More information about the users
mailing list